HP Xw460c - ProLiant - Blade Workstation User manual

HP BladeSystem Onboard Administrator
Command Line Interface
User Guide
Version 2.60
Part Number 416217-403
September 2009 (Twelfth Edition)

© Copyright 2006, 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212,
Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S.
Government under vendor’s standard commercial license.
Intended audience
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

Contents 3
Contents
Accessing the command line interface............................................................................................. 9
Remote access to the Onboard Administrator................................................................................................ 9
Local access to the Onboard Administrator................................................................................................... 9
Command line............................................................................................................................ 11
Command line overview........................................................................................................................... 11
Command line conventions....................................................................................................................... 11
HP Integrity server blade restrictions........................................................................................................... 12
Access level and privileges....................................................................................................................... 12
Account authentication................................................................................................................... 14
AutoLogin to iLO 2 ........................................................................................................................ 15
General commands..................................................................................................................... 16
CLEAR SCREEN ...................................................................................................................................... 16
EXIT....................................................................................................................................................... 16
HELP...................................................................................................................................................... 16
LOGOUT ............................................................................................................................................... 17
QUIT ..................................................................................................................................................... 17
Rack commands ......................................................................................................................... 18
SET RACK NAME.................................................................................................................................... 18
SHOW RACK NAME .............................................................................................................................. 18
SHOW TOPOLOGY................................................................................................................................ 18
User account commands.............................................................................................................. 20
ADD USER ............................................................................................................................................. 20
ASSIGN................................................................................................................................................. 20
ASSIGN OA........................................................................................................................................... 21
DISABLE USER ........................................................................................................................................ 21
DISABLE STRONG PASSWORDS .............................................................................................................. 21
ENABLE STRONG PASSWORDS .............................................................................................................. 21
ENABLE USER......................................................................................................................................... 22
HISTORY................................................................................................................................................ 22
REMOVE USER ....................................................................................................................................... 22
SET MINIMUM PASSWORD LENGTH........................................................................................................ 23
SET PASSWORD..................................................................................................................................... 23
SET SESSION TIMEOUT........................................................................................................................... 23
SET USER ACCESS.................................................................................................................................. 24
SET USER CONTACT............................................................................................................................... 24
SET USER FULLNAME .............................................................................................................................. 24
SET USER PASSWORD ............................................................................................................................ 25
SHOW PASSWORD SETTINGS................................................................................................................ 25
SHOW SESSION TIMEOUT ..................................................................................................................... 26
SHOW USER.......................................................................................................................................... 26
SLEEP .................................................................................................................................................... 27
UNASSIGN............................................................................................................................................ 27
UNASSIGN OA...................................................................................................................................... 27

Contents 4
Two-Factor Authentication commands............................................................................................ 28
DISABLE CRL........................................................................................................................................... 28
DISABLE TWOFACTOR............................................................................................................................ 28
DOWNLOAD CA CERTIFICATE ................................................................................................................ 28
DOWNLOAD USER CERTIFICATE ............................................................................................................. 29
REMOVE CA CERTIFICATE....................................................................................................................... 29
REMOVE USER CERTIFICATE.................................................................................................................... 29
SHOW CA CERTIFICATES........................................................................................................................ 29
SHOW TWOFACTOR INFO .................................................................................................................... 30
Directory commands ................................................................................................................... 31
ADD LDAP CERTIFICATE .......................................................................................................................... 31
ADD LDAP GROUP.................................................................................................................................. 31
ASSIGN for LDAP.................................................................................................................................... 31
ASSIGN OA LDAP GROUP ...................................................................................................................... 32
DISABLE LDAP......................................................................................................................................... 32
DOWNLOAD LDAP CERTIFICATE ............................................................................................................. 32
ENABLE LDAP......................................................................................................................................... 33
REMOVE LDAP CERTIFICATE .................................................................................................................... 33
REMOVE LDAP GROUP ........................................................................................................................... 33
SET LDAP GROUP ACCESS...................................................................................................................... 34
SET LDAP GROUP DESCRIPTION .............................................................................................................. 34
SET LDAP NAME MAP............................................................................................................................. 34
SET LDAP PORT....................................................................................................................................... 35
SET LDAP SEARCH .................................................................................................................................. 35
SET LDAP SERVER ................................................................................................................................... 35
SHOW LDAP CERTIFICATE....................................................................................................................... 35
SHOW LDAP GROUP.............................................................................................................................. 36
SHOW LDAP INFO ................................................................................................................................. 36
TEST LDAP.............................................................................................................................................. 37
UNASSIGN for LDAP............................................................................................................................... 37
UNASSIGN OA LDAP GROUP ................................................................................................................. 37
HP SIM commands...................................................................................................................... 39
ADD HPSIM CERTIFICATE ........................................................................................................................ 39
DOWNLOAD HPSIM CERTIFICATE ........................................................................................................... 39
REMOVE HPSIM CERTIFICATE .................................................................................................................. 39
SET HPSIM TRUST MODE......................................................................................................................... 40
SHOW HPSIM INFO............................................................................................................................... 40
General management commands ................................................................................................. 41
DOWNLOAD OA CERTIFICATE................................................................................................................ 41
FORCE TAKEOVER.................................................................................................................................. 41
GENERATE CERTIFICATE ......................................................................................................................... 41
Generate certificate prompts........................................................................................................... 42
PING..................................................................................................................................................... 43
SET DEVICE SERIAL_NUMBER BLADE ........................................................................................................ 44
SET FACTORY ........................................................................................................................................ 44
SET SCRIPT MODE .................................................................................................................................. 44
SHOW ALL ............................................................................................................................................ 45
SHOW DEVICE SERIAL_NUMBER BLADE................................................................................................... 48
SHOW INTERCONNECT SESSIONS ........................................................................................................ 48
Enclosure Bay IP Addressing commands........................................................................................ 49
ADD EBIPA............................................................................................................................................. 49

Contents 5
DISABLE EBIPA........................................................................................................................................ 49
ENABLE EBIPA........................................................................................................................................ 49
REMOVE EBIPA ...................................................................................................................................... 50
SET EBIPA .............................................................................................................................................. 50
SHOW EBIPA......................................................................................................................................... 51
Enclosure network configuration commands................................................................................... 53
ADD OA DNS ........................................................................................................................................ 53
ADD SNMP TRAPRECEIVER...................................................................................................................... 53
ADD SSHKEY ......................................................................................................................................... 53
ADD TRUSTED HOST............................................................................................................................... 54
CLEAR NTP ............................................................................................................................................ 54
CLEAR SSHKEY....................................................................................................................................... 54
CLEAR VCMODE .................................................................................................................................... 55
DISABLE ALERTMAIL ................................................................................................................................ 55
DISABLE ENCLOSURE_IP_MODE .............................................................................................................. 55
DISABLE HTTPS....................................................................................................................................... 56
DISABLE NTP.......................................................................................................................................... 56
DISABLE SECURESH ................................................................................................................................ 56
DISABLE SNMP....................................................................................................................................... 57
DISABLE TELNET ..................................................................................................................................... 57
DISABLE TRUSTED HOST.......................................................................................................................... 57
DISABLE XMLREPLY.................................................................................................................................. 58
DOWNLOAD CONFIG ........................................................................................................................... 58
DOWNLOAD SSHKEY ............................................................................................................................ 58
ENABLE ALERTMAIL................................................................................................................................. 59
ENABLE ENCLOSURE_IP_MODE............................................................................................................... 59
ENABLE HTTPS ....................................................................................................................................... 59
ENABLE NTP .......................................................................................................................................... 59
ENABLE SECURESH ................................................................................................................................ 60
ENABLE SNMP ....................................................................................................................................... 60
ENABLE TELNET...................................................................................................................................... 60
ENABLE TRUSTED HOST.......................................................................................................................... 61
ENABLE XMLREPLY .................................................................................................................................. 61
REMOVE OA DNS.................................................................................................................................. 61
REMOVE SNMP TRAPRECEIVER................................................................................................................ 61
REMOVE TRUSTED HOST......................................................................................................................... 62
SET ALERTMAIL MAILBOX ........................................................................................................................ 62
SET ALERTMAIL SENDERDOMAIN ............................................................................................................ 62
SET ALERTMAIL SMTPSERVER ................................................................................................................... 63
SET OA GATEWAY................................................................................................................................. 63
SET OA NAME....................................................................................................................................... 63
SET OA UID ........................................................................................................................................... 64
SET IPCONFIG ....................................................................................................................................... 64
SET NTP POLL......................................................................................................................................... 64
SET NTP PRIMARY................................................................................................................................... 65
SET NTP SECONDARY ............................................................................................................................ 65
SET SNMP CONTACT ............................................................................................................................. 65
SET SNMP COMMUNITY......................................................................................................................... 66
SET SNMP LOCATION ............................................................................................................................ 66
SHOW NETWORK ................................................................................................................................. 66
SHOW SNMP ........................................................................................................................................ 67
SHOW SSHFINGERPRINT........................................................................................................................ 68
SHOW SSHKEY...................................................................................................................................... 68

Contents 6
TEST ALERTMAIL ..................................................................................................................................... 69
TEST SNMP............................................................................................................................................ 69
Enclosure management commands ............................................................................................... 70
CLEAR SYSLOG ...................................................................................................................................... 70
DISABLE GUI_LOGIN_DETAIL ................................................................................................................... 70
DISABLE LLF............................................................................................................................................ 70
ENABLE GUI_LOGIN_DETAIL ................................................................................................................... 71
ENABLE LLF ............................................................................................................................................ 71
RESTART OA .......................................................................................................................................... 71
SET DATE............................................................................................................................................... 71
SET DISPLAY EVENTS .............................................................................................................................. 72
SET ENCLOSURE ASSET .......................................................................................................................... 72
SET ENCLOSURE NAME.......................................................................................................................... 73
SET ENCLOSURE PART_ NUMBER ............................................................................................................ 73
SET ENCLOSURE PDU_TYPE..................................................................................................................... 73
SET ENCLOSURE SERIAL_NUMBER ........................................................................................................... 74
SET ENCLOSURE UID .............................................................................................................................. 74
SET LLF INTERVAL.................................................................................................................................... 74
SET OA USB........................................................................................................................................... 75
SET POWER MODE................................................................................................................................. 75
SET POWER LIMIT................................................................................................................................... 75
SET POWER SAVINGS ............................................................................................................................ 76
SET TIMEZONE....................................................................................................................................... 76
SHOW CONFIG .................................................................................................................................... 76
SHOW DATE ......................................................................................................................................... 79
SHOW DISPLAY EVENTS......................................................................................................................... 80
SHOW ENCLOSURE FAN ....................................................................................................................... 80
SHOW ENCLOSURE INFO ...................................................................................................................... 81
SHOW ENCLOSURE LCD ........................................................................................................................ 81
SHOW ENCLOSURE POWERSUPPLY_SUMMARY....................................................................................... 82
SHOW ENCLOSURE POWERSUPPLY ........................................................................................................ 83
SHOW ENCLOSURE STATUS................................................................................................................... 84
SHOW ENCLOSURE TEMP ...................................................................................................................... 84
SHOW FRU............................................................................................................................................ 85
SHOW OA ............................................................................................................................................ 87
SHOW OA CERTIFICATE......................................................................................................................... 87
SHOW OA INFO ................................................................................................................................... 88
SHOW OA NETWORK ........................................................................................................................... 88
SHOW OA STATUS................................................................................................................................ 89
SHOW OA USB ..................................................................................................................................... 89
SHOW POWER...................................................................................................................................... 90
SHOW SYSLOG..................................................................................................................................... 90
SHOW SYSLOG OA............................................................................................................................... 91
SHOW VCMODE ................................................................................................................................... 92
UPDATE ................................................................................................................................................. 92
UPDATE ILO ........................................................................................................................................... 93
UPDATE IMAGE...................................................................................................................................... 93
UPLOAD CONFIG................................................................................................................................... 94
Blade management commands..................................................................................................... 95
CONNECT SERVER................................................................................................................................. 95
HPONCFG............................................................................................................................................. 95
POWEROFF SERVER................................................................................................................................ 96

Contents 7
POWERON SERVER................................................................................................................................ 96
REBOOT SERVER .................................................................................................................................... 97
SET NIC................................................................................................................................................. 97
SET SERVER BOOT.................................................................................................................................. 97
SET SERVER BOOT ONCE ....................................................................................................................... 98
SET SERVER POWERDELAY ...................................................................................................................... 98
SET SERVER UID...................................................................................................................................... 99
SHOW SERVER BOOT ............................................................................................................................ 99
SHOW SERVER INFO.............................................................................................................................. 99
SHOW SERVER LIST .............................................................................................................................. 102
SHOW SERVER NAMES........................................................................................................................ 102
SHOW SERVER PORT MAP.................................................................................................................... 103
SHOW SERVER POWERDELAY............................................................................................................... 103
SHOW SERVER STATUS ........................................................................................................................ 104
SHOW SERVER TEMP............................................................................................................................ 106
SHOW SYSLOG SERVER ....................................................................................................................... 106
UNASSIGN SERVER.............................................................................................................................. 107
Interconnect management commands.......................................................................................... 109
ASSIGN INTERCONNECT ..................................................................................................................... 109
CLEAR INTERCONNECT SESSION ......................................................................................................... 109
CONNECT INTERCONNECT ................................................................................................................. 109
POWEROFF INTERCONNECT................................................................................................................ 110
POWERON INTERCONNECT ................................................................................................................ 110
RESTART INTERCONNECT..................................................................................................................... 110
SET INTERCONNECT POWERDELAY ...................................................................................................... 111
SET INTERCONNECT UID...................................................................................................................... 111
SHOW INTERCONNECT INFO.............................................................................................................. 111
SHOW INTERCONNECT LIST ................................................................................................................ 112
SHOW INTERCONNECT PORT MAP ......................................................................................................113
SHOW INTERCONNECT POWERDELAY................................................................................................. 113
SHOW INTERCONNECT STATUS........................................................................................................... 114
Enclosure DVD commands ......................................................................................................... 116
SET SERVER DVD .................................................................................................................................. 116
SHOW SERVER DVD............................................................................................................................. 116
Remote syslog commands .......................................................................................................... 118
DISABLE SYSLOG REMOTE .................................................................................................................... 118
ENABLE SYSLOG REMOTE..................................................................................................................... 118
SET REMOTE SYSLOG PORT .................................................................................................................. 118
SET REMOTE SYSLOG SERVER ............................................................................................................... 119
SHOW SYSLOG SETTINGS ................................................................................................................... 119
TEST SYSLOG....................................................................................................................................... 119
Remote syslog example.......................................................................................................................... 120
USB support commands............................................................................................................. 121
DOWNLOAD CONFIG using USB key .................................................................................................... 121
SET SERVER DVD for USB key................................................................................................................. 121
SHOW USBKEY.................................................................................................................................... 121
UPDATE IMAGE using USB key............................................................................................................... 122
UPLOAD CONFIG using USB key............................................................................................................ 123
Enclosure Dynamic Power Cap commands .................................................................................. 124
SET ENCLOSURE POWER_CAP .............................................................................................................. 124

Contents 8
SET ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE................................................................................ 124
SHOW ENCLOSURE POWER_CAP......................................................................................................... 125
SHOW ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE........................................................................... 125
Event notifications ..................................................................................................................... 126
Enclosure event notifications ................................................................................................................... 126
Command line event notifications ............................................................................................................ 126
Technical support...................................................................................................................... 129
Before you contact HP............................................................................................................................ 129
HP contact information........................................................................................................................... 129
Time zone settings .................................................................................................................... 130
Universal time zone settings.................................................................................................................... 130
Africa time zone settings ........................................................................................................................ 130
Americas time zone settings.................................................................................................................... 131
Asia time zone settings .......................................................................................................................... 132
Oceanic time zone settings..................................................................................................................... 133
Europe time zone settings....................................................................................................................... 134
Polar time zone settings.......................................................................................................................... 134
Acronyms and abbreviations...................................................................................................... 135
Index....................................................................................................................................... 138

Accessing the command line interface 9
Accessing the command line interface
Remote access to the Onboard Administrator
The Onboard Administrator CLI can be accessed remotely through any Telnet or SSH session.
Telnet session
1. Open a command-line window from a network-connected client.
2. At the prompt, telnet to the IP address of the Onboard Administrator and press Enter.
For example, telnet 192.168.100.130, where the IP address is the address of your Onboard
Administrator.
3. Enter a valid user name and press Enter.
4. Enter a valid password and press Enter. The CLI command prompt displays.
5. Enter commands for the Onboard Administrator.
6. To terminate the remote access telnet session, enter Exit, Logout, or Quit at the CLI command
prompt.
SSH session
1. Start a SSH session to the Onboard Administrator using any SSH client application.
2. When prompted, enter the assigned IP address or DNS name of the Onboard Administrator and
press Enter.
3. Enter a valid user name and press Enter.
4. Enter a valid password and press Enter. The CLI command prompt displays.
5. Enter commands for the Onboard Administrator.
6. To terminate the remote access SSH session, close the communication software or enter Exit,
Logout, or Quit at the CLI command prompt.
Local access to the Onboard Administrator
The Onboard Administrator can be accessed locally through a serial port connector on the rear of the
Onboard Administrator module. Use a laptop or another computer as a serial console to communicate
with the Onboard Administrator. A laptop or PC connected to the Onboard Administrator serial port
requires a null-modem cable. The minimum connection to an external console is pins 2, 3, and 5.
1. Connect a serial cable between the serial port on the computer and the corresponding serial port on
the Onboard Administrator module. The following table is for the DB9 serial (RS232) port and shows
the pinout and signals for the RS232 connector. The signal direction is DTE (computer) relative to the
DCE (modem).
Pin Name Signal direction Description
1 CD <<-- Carrier detect

Accessing the command line interface 10
Pin Name Signal direction Description
2 RXD <<-- Receive data
3 TXD -->> Transmit data
4 DTR -->> Data terminal ready
5 GND System ground
6 DSR <<-- Data set ready
7 RTS -->> Request to send
8 CTS <<-- Clear to send
9 RI <<-- Ring indicator
2. Use any standard communication software to launch a terminal emulation session with the following
parameters:
Parameter Value
Transmission rate 9600 bps
Data bits 8
Parity None
Stop bits 1
Protocol None
3. When prompted, enter a valid user name, and then press Enter.
4. Enter a valid password, and press Enter. The CLI command prompt appears.
5. Enter commands for the Onboard Administrator.
6. To terminate the terminal session, enter Exit at the prompt.

Command line 11
Command line
Command line overview
The CLI can be used as an alternative method for managing the Onboard Administrator. Using the CLI
can be useful in the following scenarios:
•HP Management Applications (for example: Systems Insight Manager, Insight Control tools, and so
on) can query the Onboard Administrator for information these tools need to present a complete
management view of HP BladeSystem enclosures and the devices contained within. This interface is
also used by the Management tools to execute provisioning and configuration tasks to devices within
the enclosure.
•Users can develop tools that utilize Onboard Administrator functions for data collection and for
executing provisioning and configuration tasks.
•When no browser is available or you prefer to use a Linux command line interface to access
management data and perform configuration tasks.
Command line conventions
CLI input is case-insensitive except when otherwise noted. Commands are organized into a tree, with
approximately 30 base commands. Each of these commands can have any number of subcommands.
Subcommands can also have further subcommands.
Each command used in this guide follows the conventions listed in the following table.
Symbol Description
<lower case> Denotes the variable within the symbols that must be substituted with a value, such as
a user name. Symbols must be removed.
UPPER CASE Denotes input to be entered as shown.
Unless noted, symbol is not case-sensitive.
|Used to separate input options.
{ } Denotes a list of mandatory choices that must be made.
For example, SET ENCLOSURE UID {ON | OFF} must be in the form of either of
the following:
•SET ENCLOSURE UID ON
•SET ENCLOSURE UID OFF
[ ] Denotes an optional argument or set of characters.
" " Used to enclose command arguments that contain spaces.

Command line 12
HP Integrity server blade restrictions
HP Integrity server blades do not support all commands. See specific commands for restrictions on HP
Integrity server blades.
The following commands are not applicable to HP Integrity server blades
•Hponcfg
•Set Server Boot
•Set Server Boot Once
•Show Server Boot
•Show Syslog Server
•Update iLO
Access level and privileges
Onboard Administrator accounts and privileges
Onboard Administrator accounts are created with a username, password, privilege level, and permissions
to Device bays and Interconnect bays on the Onboard Administrator. You cannot delete or modify the
privileges of the default Administrator account, on the Onboard Administrator. You can only change the
password for the Administrator account. The following table indicates the capabilities of the user based
on their privileges and permitted bays.

Command line 13
Account classification Capabilities Account name /
Privilege level Bays selected for this account
Administrator •All commands
•Local account, not
LDAP
•Only account
remaining after a
reset Onboard
Administrator to
factory defaults
(account retains
configured
Administrator
password)
•Administrator
account password
can be reset to
factory default
through the
Onboard
Administrator serial
port using "L" lost
password recovery
option
•Can download,
add, and clear
SSHKey. This key
only works with the
Administrator
account.
Administrator /
administrator
All
OA administrator •All commands
•Allows access to all
aspects of the HP
BladeSystem
Enclosure and
Onboard
Administrator
including
configuration,
firmware updates,
user management,
and resetting default
settings.
username / administrator OA bays (all bays
automatically selected)

Command line 14
Account classification Capabilities Account name /
Privilege level
Bays selected for this
account
administrator •Can perform all
operations to
permitted device
bays and
interconnect bays
including virtual
power and console
access
•administrator
permission on device
iLO2
username / administrator No OA bays and only
selected device bays and
interconnect bays
OA operator •Set rack name
•EBIPA
enable/disable
permitted bays
•Change OA network
settings
•Perform enclosure
management
commands
username / operator OA bays and can have other
bays selected, but the
capabilities for the other
bays are defined in operator
operator •Can perform all
operations to
permitted device
bays and
interconnect bays
including virtual
power and console
access
•operator permission
on device iLO2
username / operator Selected device bays and
interconnect bays
user •Can view status and
information of
selected bays
•Can view CLI history
•Can set password
for own account
•Can set user contact
information for own
account
•Can 'show' CLI
commands
username / user No OA bays and some
device bays and interconnect
bays
Account authentication
Local users

Command line 15
•This is the default setting. Local user accounts are directly authenticated against a password for each
account stored on the active Onboard Administrator.
•Account modifications are automatically synchronized between both Onboard Administrator
modules if two are present.
•Local users may be disabled if LDAP is enabled, leaving the Administrator account as the only local
account that cannot be disabled.
LDAP users
•The Enable/Disable LDAP is an optional setting. LDAP enabled can be used with local users enabled
or disabled.
•The Onboard Administrator will use configured LDAP server and search context to request account
authentication.
•Configuration of the LDAP group will determine the privileges instead of the username.
•If a user is configured for multiple groups with different privileges and bay permissions, then the user
will have the highest privileges and the combination of all permitted bays.
•In version 2.10 or higher, if the user logged into the Onboard Administrator is an LDAP user then the
Onboard Administrator enforces the iLO2 license and requires that the iLO have a Select license
before allowing the AutoLogin to iLO.
AutoLogin to iLO 2
The following table indicates Onboard Administrator account privileges mapped to iLO 2 privileges when
using Onboard Administrator AutoLogin.
iLO 2 privileges administrator operator user
Administer user accounts X
Remote console access X X
Virtual power and reset X X
Virtual media X X
Configure iLO 2 settings X
Login to iLO X X X

General commands 16
General commands
CLEAR SCREEN
•Command:
CLEAR SCREEN
•Description:
Clears the terminal screen
•Access level:
Administrator, Operator, User
EXIT
•Command:
EXIT
•Description:
Exits the command line interpreter
•Access level:
Administrator, Operator, User
HELP
•Command:
HELP <command>
•Description:
If you supply a command, the usage and help text for the command appears. If no argument is
given, all base commands appear.
•Access level:
Administrator, Operator, User
Example
OA-0018FE27577F> HELP
ADD | ASSIGN | CLEAR | CONNECT | DISABLE | DOWNLOAD | ENABLE | EXIT | FORCE | GENERATE |
HELP | HISTORY | HPONCFG | LOGOUT | PING | POWEROFF | POWERON | QUIT | REBOOT | REMOVE |
RESET | RESTART | SET | SHOW | SLEEP | TEST | UNASSIGN | UPDATE | UPLOAD

General commands 17
LOGOUT
•Command:
LOGOUT
•Description:
Exits the command line interpreter
•Access level:
Administrator, Operator, User
QUIT
•Command:
QUIT
•Description:
Exits the command line interpreter
•Access level:
Administrator, Operator, User

Rack commands 18
Rack commands
SET RACK NAME
•Command:
SET RACK NAME <rack name>
•Description:
Sets the rack name
•Access level/Bay level:
OA administrator, OA operator
•Restrictions:
The <rack name> must be a maximum of 32 characters long and includes all alphanumeric, the
dash, and the underscore characters.
UnnamedRack is the default rack name.
SHOW RACK NAME
•Command:
SHOW RACK NAME
•Description:
Displays the user defined rack name setting for the enclosure
•Access level/Bay level:
All
•Restrictions:
None
•Example:
OA-0018FE27577F> SHOW RACK NAME
Rack Name: UnnamedRack
SHOW TOPOLOGY
•Command:
SHOW TOPOLOGY
•Description:
oDisplays the enclosures connected by the enclosure link
oDisplays a table with the enclosure name, overall health of the enclosure, and the IP address

Rack commands 19
•Access level/Bay level
All
•Restrictions:
None
Example
SHOW TOPOLOGY
Detecting linked enclosures ....
Rack Topology (top-down)
Rack UUID: 090987654321
Rack Name: UnnamedRack
Enclosure Name Status Local IP Address UUID
-------------------------------- -------- ----- --------------- -------------
Shorty OK Yes 16.84.190.253 090987654321
OA-0018FE2F998B OK No 172.16.211.101 09USE644285C

User account commands 20
User account commands
ADD USER
•Command:
ADD USER "<user name>" ["<password>"]
•Description:
Adds a user to the system. If you do not provide a password, you are prompted for one. If SCRIPT
MODE is enabled and the password is not provided, the password is assigned an unmatched string.
This unmatched string requires an enclosure administrator to change the password to allow the new
user to access the system.
•Access level/Bay level:
OA administrator
•Restrictions:
oYou can add a maximum of 30 users, including the reserved accounts.
oThe <user name> is case sensitive and must be unique to all other user names and group names.
The <user name> must be 1 to 40 characters long and can include all alphanumeric characters,
the dash, and the underscore.
oThe <user name> must begin with a letter.
oThe <password> must be three to eight characters long for firmware 1.00 through 1.30 and 3 to
40 characters long for firmware 2.00 and later. The character set includes all printable
characters. If you do not enter a password, you are prompted to enter one.
oReserved user names are: ALL (case insensitive) ADMINISTRATOR (case insensitive), switch1,
switch2, switch3, switch4, switch5, switch6, switch7, switch8, ldapuser, nobody, vcmuser,
vcmuser_, and root (for firmware 1.00 through 1.30).
ASSIGN
•Command:
ASSIGN {SERVER | INTERCONNECT} {<bay number> | ALL | <bay number>-<bay
number>} {"<user name>" | LDAP GROUP "<LDAP group name>"}
•Description:
Assigns one or more bays to a user or group
•Access level/Bay level:
OA administrator
•Restrictions:
The <user name> is case sensitive. If a bay is presently assigned to a user, you must unassign the
bay first.