HP P9000 Instruction Manual

HP StorageWorks
P9000 RAID Manager 01.25.03 Release
Notes
HP Part Number: T1610-96033
Published: May 2011
Edition: First

© Copyright 2010, 2011
Acknowledgments
Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the
United States and other countries.
UNIX® is a registered trademark of The Open Group.

Version:
01.25.03
Description
This package contains an update of HP StorageWorks P9000 RAID Manager. For all of the
enhancements and fixes in this update, see the rest of this document. For the most recent hardware
and operating system support, see SPOCK:
http://spock.corp.hp.com/default.aspx
Update recommendation
Recommended
Supersedes
01.24.16
Product models
HP StorageWorks P9000 RAID Manager for HP-UX
HP StorageWorks P9000 RAID Manager for Solaris
HP StorageWorks P9000 RAID Manager for Solaris/x86
HP StorageWorks P9000 RAID Manager for AIX
HP StorageWorks P9000 RAID Manager for Tru64 UNIX (Digital UNIX)
HP StorageWorks P9000 RAID Manager for Linux
HP StorageWorks P9000 RAID Manager for Linux/IA64
HP StorageWorks P9000 RAID Manager for IRIX64
HP StorageWorks P9000 RAID Manager for OpenVMS
HP StorageWorks P9000 RAID Manager for OpenVMS/IA
HP StorageWorks P9000 RAID Manager for zLinux
Devices supported
HP StorageWorks XP1024 Disk Array: microcode 21-10-00 or later
HP StorageWorks XP12000 Disk Array: microcode 50-09-35 or later
HP StorageWorks XP24000 Disk Array: microcode 60-01-30 or later
HP StorageWorks P9500 Disk Array: microcode 70-01-01 or later
Operating systems
Supported hardwareSupported operating system
HP 9000 series or HITACHI 9000 V seriesHP-UX 10.20 or later
Pentium or compatible processorsWindows NT 4.0 or 2000
Pentium, EM64T, Itanium, or compatible processorsWindows 2003 or 2008
Sun SPARC or Sun Ultra seriesSolaris 2.5 or later
Pentium, EM64T, or compatible processorsSolaris 10 or later
RS/6000 seriesAIX 4.3 or later
AlphaServer modelsDigital UNIX 4.0 or later
Description 3

Supported hardwareSupported operating system
AlphaServer modelsTru64 UNIX 5.0 or later
Symmetry 5000 seriesDYNIX/ptx 4.4 or later
Itanium or compatible processorsRed Hat Linux AS/ES 3.0 Update 2 or later
(with the ia32el package and Compatibility Layer disk
installed)
EM64T, Itanium, or compatible processorsRed Hat Linux AS/ES 4.0, 5.0, or later
(with the ia32el package and Compatibility Layer disk
installed if on IA64)
HP 3000 seriesMPE/iX C.16.01 or later
(with patch MPEKXU3 installed for using the SCSI pass-thru
driver)
Origin 2000 seriesIRIX 6.5 or later
AlphaServer modelsOpenVMS 7.3-1 or later
(with C Run Time Library (RTL) installed)
Integrity serversOpenVMS 8.3 or later
zSeries or S/390 processorsSuSE Linux Enterprise Server 8 or 9 or later on Microsoft
Windows XP
Pentium or compatible processorsVMware ESX Server 2.5.1 or later
Enhancements
•Added description of -logint and -logtst options.
•Added HORCC_AUTH_UID environment variable.
•Added description of rendev command for AIX 7.1.
•Supported FCoE interface for supporting BC/SS/CMDDEV on Windows.
•Added resource group control.
Fixes
•Changed description about authentication mode for VSS.
•Changed condition that removes AUTH file.
Prerequisites
If you use the following software, install the RAID Manager/LIB that is under the ../RL directory on
the CD.
•BMC Enterprise Snapshot software
•Remote performance monitor provided by HP
•HP Omniback software
•RAID management software provided by HP or other vendor
Installation instructions
See the following user guide for installation instructions:
HP StorageWorks P9000 RAID Manager User Guide
4 Enhancements

Part number: T1610–96032
Edition date: May 2011
Installation instructions 5