HP R/T2200 G4 ERM Installation instructions

Product End-of-Life Disassembly Instructions
Product Category: Other Products
Marketing Name / Model
[List multiple models if applicable.]
HP R/T2200 G4 ERM
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
1
Batteries
All types including standard alkaline and lithium coin
or button style batteries
8
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01

Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Star Head Screw Driver
M3
Cross Head Screw Driver
M3,M4
Plastic Nipper
Normal
Nut Driver
M4
Electric Iron
Normal
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove the middle bezel and left panel.
2. Loosen the screws fixing battery door and right panel, and then remove the battery door and right panel.
3. Loosen the screws fixing the top cover, and remove the top cover.
4. Disconnect the battery cables, and wrap the cable terminals with insulating tape.
5. Loosen the nuts fixing the battery brackets, and remove the battery brackets.
6. Stand the batteries, and disconnect the cables connecting to Fuse Board and rear panel ASSY, and then remove the
batteries.
7. Loosen the screws fixing the cables on the Fuse Board , and loosen the screws fixing the Fuse Board , and then
remove the Fuse Board .
8. Loosen the nuts fixing the ground cable to the mainframe, and loosen the screws fixing the rear panel ASSY, and then
remove the rear panel assembly.
9. Disassemble the rear panel ASSY into separate parts.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
1. Remove the middle bezel and left panel.
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01

2. Loosen the screws fixing battery door and right panel, and then remove the battery door and right panel.
3. Loosen the screws fixing the top cover, and remove the top cover.
EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01

4. Disconnect the battery cables, and wrap the cable terminals with insulating tape.
5. Loosen the nuts fixing the battery brackets, and remove the battery brackets.
6. Stand the batteries, and disconnect the cables connecting to Fuse Board and rear panel ASSY, and then
remove the batteries.
EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01

7. Loosen the screws fixing the cables on the Fuse Board, and loosen the screws fixing the Fuse Board, and
then remove the Fuse Board.
8. Loosen the nuts fixing the ground cable to the mainframe, and loosen the screws fixing the rear panel ASSY,
and then remove the rear panel assembly.
9. Disassemble the rear panel ASSY into separate parts.
EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01