HP 316095-B21 - StorageWorks Edge Switch 2/24 User manual

hp StorageWorks
HAFM server installation guide
Part Number: AA-RT4KB-TE
Second Edition (January 2003)
This document describes how to install and configure the HP
notebook PC to function as the High Availability Fabric Manager
(HAFM) server.

© Hewlett-Packard Company, 2003. All rights reserved.
Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but
not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material.
This document contains proprietary information, which is protected by copyright. No part of this
document may be photocopied, reproduced, or translated into another language without the prior
written consent of Hewlett-Packard. The information contained in this document is subject to change
without notice.
Microsoft, Windows, and Windows 2000 are trademarks of Microsoft Corporation in the U.S. and/or
other countries.
All other product names mentioned herein may be trademarks of their respective companies.
Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained
herein. The information is provided “as is” without warranty of any kind and is subject to change
without notice. The warranties for Hewlett-Packard Company products are set forth in the express
limited warranty statements accompanying such products. Nothing herein should be construed as
constituting an additional warranty.
Printed in the U.S.A.
HAFM server installation guide
Second Edition (January 2003)
Part Number: AA-RT4KB-TE

iiiHAFM server installation guide
Contents
About this Guide
Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Symbols in Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Symbols on Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Rack Stability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Getting Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
HP Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
HP Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
HP Authorized Reseller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
1 Introduction
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
2 System Requirements
Requirements and Capabilities of the Notebook PC . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
3 PC Setup and Configuration
Drive Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
CMOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Install LAN Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2
4 Windows 2000 Setup and Configuration
Power Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Changing the Default Power Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
5 Internet Information Server Setup and Configuration
Installing IIS 5.0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1
Web Server Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3

Contents
iv HAFM server installation guide
FTP Server Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3
Configuring the FTP Server Home Directory for Read/Write Access. . . . . . . . . . . . . . 5–4
6 HAFM Management Applications Installation
Installing the HAFM Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1
Iomega QuikSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1
7 HAFM Server Configuration
Connecting the HAFM Server to a LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1
Configure HAFM Server Network Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–3
Set HAFM Server Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–12
Configure and Enable Call-Home Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–16
Configure the Call-Home via Dial-out Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–17
Configuring Windows 2000 to Enable a Dial-up Connection . . . . . . . . . . . . . . . . 7–20
Configure and Enable the Proactive Services Call-Home via LAN Feature . . . . . 7–21
Test Remote Notification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–22
8 HAFM Operation
HAFM Services Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–2
HAFM Login Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–3
Service Control Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–4
Stopping and Starting the HAFM Server from a Local Client. . . . . . . . . . . . . . . . . 8–4
Accessing the Service Control Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–4
Using HAFM Server to Manage the SAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–5
9 Backing Up and Restoring the HAFM Server
Backing Up Configuration Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–1
Record or Verify HAFM Server Restore Information . . . . . . . . . . . . . . . . . . . . . . . . . . 9–2
Restore the HAFM Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–3
Install or Upgrade Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–4
10 Sliding Shelf Installation for HAFM Server
Installing the Rear Mounting Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–1
Replacing Front Brackets (HP 9000, 10000 and 110000 Series Cabinets Only). . 10–2
Installing and Securing the Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–4

Contents
vHAFM server installation guide
Index
Figures
4–1 Power Options Properties window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
5–1 Windows Components Wizard window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2
7–1 HAFM server LAN connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–2
7–2 HAFM Login dialog box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–4
7–3 System Properties dialog box—Network Identification tab . . . . . . . . . . . . . . . 7–5
7–4 Identification Changes dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–6
7–5 Local Area Connection Status dialog box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–7
7–6 Local Area Connection Properties dialog box . . . . . . . . . . . . . . . . . . . . . . . . . 7–8
7–7 Internet Protocol (TCP/IP) Properties dialog box. . . . . . . . . . . . . . . . . . . . . . . 7–9
7–8 Advanced TCP/IP Settings dialog box—IP Settings tab . . . . . . . . . . . . . . . . 7–10
7–9 Advanced TCP/IP Settings dialog box—DNS tab . . . . . . . . . . . . . . . . . . . . . 7–11
7–10 HAFM Login dialog box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–13
7–11 Date/Time Properties dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–14
7–12 Date/Time Properties dialog box—Time Zone tab. . . . . . . . . . . . . . . . . . . . . 7–15
7–13 Type of Connection window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–17
7–14 Phone Number to Dial window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–18
7–15 Connection Availability window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–18
7–16 Ready to create your connection window. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–19
7–17 Test Remote Notification dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–22
8–1 HAFM Services window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–2
8–2 HAFM Login dialog box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–3
8–3 Services window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–5
10–1 Installing the rear mounting brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–2
10–2 Removing the front bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–3
10–3 Attaching a long front bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–3
10–4 Attaching sliding shelf to rear mounting bracket . . . . . . . . . . . . . . . . . . . . . . 10–4
Tables
1 Document Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
2–1 HAFM Server System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
3–1 CMOS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1

viiHAFM server installation guide
About this Guide
This installation guide provides information to help you:
• Set up the HP notebook PC.
• Configure the HP notebook PC to function as a High Availability Fabric Manager
(HAFM) server.
• Install the HAFM server and its slide out shelf into a supported equipment cabinet.
• Contact technical support for additional assistance.
Intended Audience
This book is intended for use by administrators who are experienced with the
following:
• Fibre Channel technology
• StorageWorks Fibre Channel Switches by HP
Related Documentation
For a list of corresponding documentation, see the Related Documents section of the
Release Notes that came with this product.
For the latest information, documentation, and firmware releases, please visit the HP
StorageWorks website:
http://h18006.www1.hp.com/storage/saninfrastructure.html
For information about Fibre Channel standards, visit the Fibre Channel Industry
Association website, located at http://www.fibrechannel.org.

About this Guide
viii HAFM server installation guide
Document Conventions
The conventions included in Table 1 apply.
Symbols in Text
These symbols may be found in the text of this guide. They have the following
meanings.
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could
result in damage to equipment or data.
IMPORTANT: Text set off in this manner presents clarifying information or specific instructions.
NOTE: Text set off in this manner presents commentary, sidelights, or interesting points of
information.
Table 1: Document Conventions
Element Convention
Cross-reference links Blue text: Figure 1
Key names, menu items, buttons, and
dialog box titles
Bold
File names, application names, and text
emphasis
Italics
User input, command names, system
responses (output and messages)
Monospace font
COMMAND NAMES are uppercase
unless they are case sensitive
Variables Monospace, italic font
Website addresses Sans serif font (http://thenew.hp.com)

About this Guide
ixHAFM server installation guide
Symbols on Equipment
Any enclosed surface or area of the equipment marked with these
symbols indicates the presence of electrical shock hazards. Enclosed
area contains no operator serviceable parts.
WARNING: To reduce the risk of injury from electrical shock hazards, do
not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a network
interface connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors into
this receptacle.
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. Contact with
this surface could result in injury.
WARNING: To reduce the risk of injury from a hot component, allow the
surface to cool before touching.
Power supplies or systems marked with these symbols indicate the
presence of multiple sources of power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from the
power supplies and systems.
Any product or assembly marked with these symbols indicates that the
component exceeds the recommended weight for one individual to
handle safely.
WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manually handling material.

About this Guide
xHAFM server installation guide
Rack Stability
WARNING: To reduce the risk of personal injury or damage to the equipment, be
sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• In single rack installations, the stabilizing feet are attached to the rack.
• In multiple rack installations, the racks are coupled.
• Only one rack component is extended at any time. A rack may become
unstable if more than one rack component is extended for any reason.
Getting Help
If you still have a question after reading this guide, contact an HP authorized service
provider or access our website: http://thenew.hp.com.
HP Technical Support
In North America, call technical support at 1-800-652-6672, available 24 hours a day,
7 days a week.
NOTE: For continuous quality improvement, calls may be recorded or monitored.
Outside North America, call technical support at the nearest location. Telephone
numbers for worldwide technical support are listed on the HP website under support:
http://thenew.hp.com/country/us/eng/support.html.
Be sure to have the following information available before calling:
• Technical support registration number (if applicable)
• Product serial numbers
• Product model names and numbers
• Applicable error messages
• Operating system type and revision level
• Detailed, specific questions

About this Guide
xiHAFM server installation guide
HP Website
The HP website has the latest information on this product, as well as the latest drivers.
Access storage at: http://thenew.hp.com/country/us/eng/prodserv/storage.html. From this
website, select the appropriate product or solution.
HP Authorized Reseller
For the name of your nearest HP Authorized Reseller:
• In the United States, call 1-800-345-1518
• In Canada, call 1-800-263-5868
• Elsewhere, see the HP website for locations and telephone numbers:
http://thenew.hp.com.

1–1HAFM server installation guide
1
Introduction
This document describes the setup and configuration requirements for the HP
notebook PC to function as an HAFM server. This is to be used as a guide for
configuring the PC, installing the software, installing the sliding shelf into a cabinet,
and basic operation of the HAFM server application.
Introduction
The High Availability Fabric Manager (HAFM) server is a notebook PC with the
HAFM application installed. The applications provide a graphical user interface
(GUI) for operating and managing HP HA-Fabric Directors and Edge Switches.
NOTE: The HAFM server and related applications provide a GUI to monitor and manage
HP products. The HAFM server is a dedicated hardware and software solution that should not
be used for other tasks. HP tests the HAFM application installed on the HAFM server, but does
not test for compatibility with other, third-party software. Modifications to the HAFM server
hardware or installation of additional software (including patches or service packs) may interfere
with normal operation.
The chapters in this document are as follows:
•“System Requirements” on page 2–1 describes the hardware requirements for
HAFM server operation.
•“PC Setup and Configuration” on page 3–1 describes the hardware configuration
and CMOS setup.
•“Windows 2000 Setup and Configuration” on page 4–1 describes operating
system configuration.
•“Internet Information Server Setup and Configuration” on page 5–1 describes
Web server and FTP server installation.
•“HAFM Management Applications Installation” on page 6–1 describes steps for
installing HAFM software.
•“HAFM Server Configuration” on page 7–1 describes steps for connecting the
HAFM server to a LAN and configuring its network information.

Introduction
1–2 HAFM server installation guide
•“HAFM Operation” on page 8–1 describes operating the management services of
the HAFM
•“Backing Up and Restoring the HAFM Server” on page 9–1 describes steps
required to perform data backup and to restore the notebook to it’s original
configuration.
•“Sliding Shelf Installation for HAFM Server” on page 10–1 describes steps
required to install the sliding shelf for the HAFM server in a cabinet.

2–1HAFM server installation guide
2
System Requirements
This chapter describes the system requirements for a HAFM server PC platform along
with the actual capabilities (compliance) of the HP notebook PC.
Requirements and Capabilities of the Notebook PC
Table 2–1 lists the minimum requirements and actual capabilities of the HAFM server.
Table 2–1: HAFM Server System Requirements
Minimum Requirement Actual Capabilities
Intel 333 Mhz 800 Mhz Pentium III
128 MB RAM 160 MB RAM
4 GB hard drive 18 GB hard drive
Single Ethernet 10/100 Mbps
interface
Internal 3Com 10/100 Mini PCI adapter
Zip Drive Internal Zip Drive (100 MB media)
CD-ROM Drive Compliant1
1. The CD-ROM is required for the initial install of HAFM and for subsequent
updates. The Zip drive is required to be installed with media for normal
operation, or to service HAFM.
Modem Internal 3Com 56K Mini PCI modem
(COM3)
Color VGA 1024 x 768
resolution
Compliant
Video power down when lid is
closed
Compliant
Auto boot when power is
applied
Compliant

3–1HAFM server installation guide
3
PC Setup and Configuration
The notebook PC must be set up with a specific configuration for it to function
properly as an HAFM server. This level of setup must be performed any time a PC is
configured from scratch.
This chapter describes the requirements for setting up disk partitions and configuring
certain CMOS setup options.
Drive Assignments
The HAFM software requires the following logical disk drive assignments:
• C: Hard drive partition
• D: Internal Zip drive or Internal CD-ROM drive (used only for recovery or
upgrade)
CMOS Setup
Certain options must be configured properly in the CMOS Setup Utility. The Setup
Utility is entered by pressing the F2 key when prompted immediately after applying
power to the HP notebook PC.
All options may be left at their default settings except for specific options under the
Power (APM) tab as listed below in Table 3–1. Because the PC will always have an
AC power source, there is no need to have any level of power saving options enabled.
Furthermore, never allow the PC to enter Hibernate mode because the PC must
continue to run 24x7 to monitor the switches.
Table 3–1: CMOS Settings
Option Setting
Intel SpeedStep Mode: [Performance]
Power Management Mode: [Disabled]
Smart CPU Mode: Off

PC Setup and Configuration
3–2 HAFM server installation guide
Install LAN Card (Optional)
If you are implementing a public/private LAN, before proceeding with the Microsoft
Windows 2000 installation, install the customer-provided 3Com 10/100 Type III
CardBus PC Card in the CardBus slot.
Display Time-out: Off
Suspend Time-out: Off
Hibernate Time-out: Off
Hard Disk Time-out: Off
Time-out on AC: [Disabled]
Lid Switch Mode: [Turn Off LCD]
Resume On Serial Ring: [Disabled]
Resume On Time of Day: [Disabled]
Auto Suspend on Undock: [Never]
Auto Turn-On on Dock: [Enabled]
Table 3–1: CMOS Settings (Continued)

4–1HAFM server installation guide
4
Windows 2000 Setup and Configuration
To install and operate HAFM on the HP notebook PC, Windows 2000 must be
installed. Windows 2000 is not factory installed on the HP notebook PC. To install
Windows 2000, use the HP System Recovery CDs that come with the PC. See the
README.TXT file on Disk 1 of these CDs for specific instructions on performing a
factory installation. Note that the PC comes with recovery CDs for both Windows NT
Workstation 4.0 (single CD) and Windows 2000 Professional (two CDs). Use the
System Recovery CD for Windows 2000 Professional (the dual CD set).
Because this process requires the use of a CD-ROM drive, replace the internal Zip
drive with an internal CD-ROM drive prior to performing the installation.
Power Options
The default power options selected during the Windows 2000 installation allow the
system to enter standby and hibernate modes after a period of inactivity. Change these
defaults to prevent the PC from ever entering either of these modes by selecting a
pre-defined power scheme that never allows the system to enter standby or hibernate
modes.
Changing the Default Power Options
To change the default power options, complete the following steps:
1. Choose Start > Settings > Control Panel. The Control Panel window displays.
2. Double-click Power Options. The Power Options Properties dialog box
displays, as shown in Figure 4–1.

Windows 2000 Setup and Configuration
4–2 HAFM server installation guide
Figure 4–1: Power Options Properties window
3. Choose Always On from the Power schemes drop-down list.
4. Click OK.