HP V1905 Series User manual

i
HP V1905 Switch Series
Getting Started Guide
*5998-2235*
Part number: 5998-2235
Document version: 2

ii
HP V1905 Switch Series Getting Started Guide describes the appearance; installation, configuration, and
troubleshooting of the HP V1905 switch series.
This documentation set is intended for:
Network planners
Field technical support and servicing engineers
Network administrators working with the HP V1910 switches
Legal and notice information
© Copyright 2011 Hewlett-Packard Development Company, L.P.
No part of this documentation may be reproduced or transmitted in any form or by any means without prior
written consent of Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or
for incidental or consequential damages in connection with the furnishing, performance, or use of this
material.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Warranty
The Hewlett-Packard Limited Warranty Statement for this product and the HP Software License Terms which
apply to any software accompanying this product are available on the HP networking Web site at
http://www.hp.com/networking/warranty.The customer warranty support and services information are
available on the HP networking Web site at http://www.hp.com/networking/support. Additionally, your
HP-authorized network reseller can provide you with assistance, both with services that they offer and with
services offered by HP.

iii
Contents
Getting Started ····························································································································································· 1
Introducing the Switch·························································································································································1
Overview of the Switch·················································································································································1
Summary of Hardware Features ··································································································································1
Front View Detail ···························································································································································2
LED Status Indicators······················································································································································3
System Specifications ····················································································································································4
Installing the Switch ·····························································································································································5
Before You Begin ···························································································································································5
Positioning the Switch····················································································································································5
Rack-Mounting or Free-Standing ··································································································································6
Supplying Power to the Switch·····································································································································7
Checking for Correct Operation ··································································································································8
Using SFP Transceivers··················································································································································8
Performing Spot Checks ············································································································································· 10
Configuring IP Address ···················································································································································· 10
Automatic IP Configuration using DHCP·················································································································· 10
Manual IP Configuration············································································································································ 10
Connecting To the Web Interface·····························································································································12
Requirements for Accessing the Web Interface············································································································· 12
Choosing a Web Browser ··············································································································································· 12
Default User and Password·············································································································································· 12
Logging On to the Web Interface··································································································································· 13
Navigating the Web Interface ········································································································································ 13
Menu ············································································································································································ 13
Buttons·········································································································································································· 16
Configuring the Switch ··············································································································································18
Configuring System Access·············································································································································· 18
Defining System Access ············································································································································· 18
Modifying System Access ·········································································································································· 19
Removing System Access ··········································································································································· 20
Viewing System Access Settings ······························································································································· 20
Configuring IP and MAC Address Information ············································································································· 21
Defining IP Address ···················································································································································· 21
Configuring ARP Settings ··········································································································································· 21
Configuring MAC Address Table ····························································································································· 24
Configuring Port································································································································································ 28
Configuring Port Basic Settings ································································································································· 28
Configuring PoE·························································································································································· 31
Viewing Port Statistics ················································································································································ 34
Configuring VLAN ···························································································································································· 35
Creating VLANs ·························································································································································· 36
Modifying VLAN························································································································································· 37
Modifying Port VLAN Settings··································································································································· 38
Renaming VLANs························································································································································ 38
Removing VLANs ························································································································································ 39

iv
Viewing VLAN Details················································································································································ 39
Viewing VLAN Port Details ········································································································································ 40
Aggregating Port ······························································································································································ 41
Overview ····································································································································································· 41
LACP············································································································································································· 41
Link Aggregation Types·············································································································································· 41
Configuring Link Aggregation··································································································································· 42
Configuring LACP ······················································································································································· 45
Configuring STP ································································································································································ 46
Configuring IGMP Snooping··········································································································································· 52
Defining IGMP Snooping··········································································································································· 52
Configuring ACL ······························································································································································· 53
Configuring MAC Based ACL ··································································································································· 53
Configuring IP Based ACL ········································································································································· 57
Configuring ACL Binding··········································································································································· 62
Configuring QoS ······························································································································································ 64
Configuring CoS ························································································································································· 64
Configuring Queue Algorithm··································································································································· 65
Configuring CoS to Queue········································································································································ 66
Configuring DSCP to Queue ····································································································································· 67
Configuring Trust Mode ············································································································································· 69
Configuring Bandwidth Settings································································································································ 69
Configuring Voice VLAN ··········································································································································· 71
Configuring SNMP ··························································································································································· 76
Defining SNMP Communities ···································································································································· 76
Removing SNMP Communities·································································································································· 77
Defining SNMP Traps················································································································································· 77
Removing SNMP Traps ·············································································································································· 78
Configuring LLDP······························································································································································· 79
LLDP Overview ···························································································································································· 79
Configuring Global LLDP Parameters ······················································································································· 79
Configuring Port-Level LLDP Parameters···················································································································· 80
Viewing LLDP Information ·········································································································································· 83
Managing Switch Security··············································································································································· 85
Defining Port-Based Authentication (802.1X) ·········································································································· 85
Defining Radius Client················································································································································ 89
Configuring LDB·························································································································································· 89
Configuring Broadcast Storm Control ······················································································································ 93
Managing System Information ········································································································································ 94
Viewing Basic Settings ··············································································································································· 95
Configuring System Name········································································································································· 96
Configuring System Time ··········································································································································· 97
Save Configuration····················································································································································· 99
Resetting the Switch···················································································································································· 99
Managing System Files ···················································································································································· 99
Managing System Logs ··················································································································································102
Configuring Logging·················································································································································103
Viewing Logs ·····························································································································································104
Managing Switch Diagnostics·······································································································································105
Configuring Port Mirroring ······································································································································105
Configuring Cable Diagnostics ·······························································································································106

v
Troubleshooting······················································································································································· 108
Resetting to Factory Defaults··········································································································································108
Forgotten Password ························································································································································108
Reset the switch·························································································································································108
Configure a new user···············································································································································108
Forgotten Static IP Address ············································································································································109
Solving LED Issues···························································································································································109
CLI Reference Guide ··············································································································································· 111
Getting Started with the Command Line Interface·······································································································111
Prerequisites·······························································································································································111
Logging on to the CLI ···············································································································································111
CLI Features ·····································································································································································112
Online Help·······························································································································································112
Command History·····················································································································································113
Error Messages ·························································································································································114
Command Edit ··························································································································································114
CLI Configuration····························································································································································115
display ip···································································································································································115
display management-vlan ········································································································································116
display version ··························································································································································116
ip address··································································································································································117
ip address dhcp-alloc ···············································································································································117
ip gateway ································································································································································118
localuser·····································································································································································118
management-vlan······················································································································································118
management-vlan port··············································································································································119
ping ············································································································································································120
quit··············································································································································································120
reboot·········································································································································································121
restore ········································································································································································121
save ············································································································································································122
tftp update ·································································································································································122
Support and other resources ·································································································································· 123
Contacting HP ·································································································································································123
Related information·························································································································································123
Conventions·····································································································································································123
Subscription service························································································································································124
Glossary··································································································································································· 125
Index ········································································································································································ 128

1
Getting Started
NOTE:
This manual applies to the HP V1905-48 Switch JD994A, HP V1905-24 Switch JD990A, and HP
V1905-24-PoE Switch JD992A, which are referred to as the Switch.
This manual uses the Web interfaces of the HP V1905-24-PoE Switch JD992A in the example text.
This chapter contains introductory information about the installation of the Switch and how the Switch can
be used in your network. It covers the following topics:
Introducing the Switch
Installing the Switch
Configuring IP Address
Introducing the Switch
This chapter covers summary information about the hardware and the following topics:
Overview of the Switch
Summary of Hardware Features
Front View Detail
LED Status Indicators
System Specifications
Overview of the Switch
The HP V1905-24 Switch JD990A is a versatile, easy-to-use configurable switch.
The HP V1905-24-PoE Switch JD992A is a versatile, easy-to-use configurable Power-over-Ethernet
(PoE) Switch.
The HP V1905-48 Switch JD994A is a versatile, easy-to-use configurable switch.
Each Switch is ideal for users who want the high-speed performance of 10/100 switching with the added
functionality of Gigabit copper and fiber links, but do not need sophisticated management capabilities. The
Switch is shipped ready for use. No configuration is necessary.
Summary of Hardware Features
Table 37 summarizes the hardware features supported by the Switch.
Table 37 Hardware Features
Feature Descri
p
tion
Addresses Up to 8192 supported.
Auto-negotiation Supported on all ports.

2
Feature Descri
p
tion
Forwarding Modes Store and Forward.
Duplex Modes Half and full duplex on all front panel ports.
Auto MDI/MDIX Supported on all ports. If fiber SFP transceivers are used, Auto
MDIX is not supported.
Flow Control In full duplex operation all ports are supported.
Traffic Prioritization Four traffic queues per port.
Ethernet Ports
10/100 Mbps ports.
Each port automatically determines the speed and duplex mode of
the connected equipment and provides a suitable switched
connection. The 10/100 Mbps ports can operate in either
half-duplex or full-duplex mode.
Gigabit Combo Ports
The 2 Gigabit combo ports support fiber Gigabit Ethernet
short-wave (SX) and long-wave (LX) SFP transceivers in any
combination. This offers you the flexibility of using SFP transceivers
to provide connectivity between the Switch and a 1000 Mbps core
network.
When an SFP port is in operation, the corresponding 1000BASE-T
port is disabled. The 1000 Mbps connections can only operate in
full duplex mode.
Mounting 19-inch rack or standalone mounting.
Fanless design (supported by HP
V1905-24 Switch JD990A and HP
V1905-48 Switch JD994A)
Silent operation whether used in a rack or desktop situation.
PoE (Only supported by HP
V1905-24-PoE Switch JD992A)
Each RJ-45 port supports the IEEE 802.3af PoE standard. Any
802.3af compliant device attached to a port can directly draw
power from the switch over the Ethernet cable without requiring its
own separate power source. This capability gives network
administrators centralized power control for devices such as IP
phones and wireless access points, which translates into greater
network availability.
Front View Detail
Figure 46 shows the front panel of the HP V1905-24 Switch JD990A 26-Port unit.
Figure 46 HP V1905-24 Switch JD990A 26-Port—front panel.
Figure 47 shows the front panel of the HP V1905-24-PoE Switch JD992A 26-Port unit.

3
Figure 47 HP V1905-24-PoE Switch JD992A 26-Port—front panel.
Figure 48 shows the front panel of the HP V1905-48 Switch JD994A 50-Port unit.
Figure 48 HP V1905-48 Switch JD994A 50-Port—front panel.
LED Status Indicators
The Switch provides LED indicators on the front panel to monitor the switch. Table 38 describes the
meanings of the LEDs.
Table 38 Description on the LEDs of the Switch
LED Status
Descri
p
tion
Power
Green The switch starts normally. The LED flashes when the
system is performing Power-On Self-Test (POST).
Yellow The system has failed the POST.
OFF The switch is powered off.
Link/Activity
10/100BASE-T
port
Green The port works at the rate of 100 Mbps; the LED flashes
quickly when the port is sending or receiving data.
Yellow The port works at the rate of 10 Mbps; the LED flashes
quickly when the port is sending or receiving data.
OFF
The link has not been established, either nothing is
connected to the port, or there is a problem:
Check that the attached device is powered on.
Check that the cable is the correct type and is not
faulty.
If these checks do not identify the cause of the problem, it
may be that the unit or the device connected to the port is
faulty. Contact your supplier for further advice.
10/100/1000
BASE-T port
Green The port works at the rate of 1000 Mbps; the LED flashes
quickly when the port is sending or receiving data.
Yellow
The port works at the rate of 10/100 Mbps; the LED
flashes quickly when the port is sending or receiving
data.
OFF
The link has not been established, either nothing is
connected to the port, or there is a problem:
Check that the attached device is powered on.
Check that the cable or fiber is the correct type and is

4
LED Status Descri
p
tion
not faulty.
For fiber connections, ensure that the receive (RX) and
transmit (TX) cable connectors are not swapped.
If these checks do not identify the cause of the problem, it
may be that the unit or the device connected to the port is
faulty. Contact your supplier for further advice.
Duplex 10/100/1000
BASE-T port
Yellow The port is in full duplex mode.
OFF The port is not connected, or is in half duplex mode.
Module Active SFP port Green The SFP module is inserted.
OFF The SFP module is not inserted or is not recognized.
PoE Power (Only supported by HP
V1905-24-PoE Switch JD992A)
Green The port is supplying power to the device connected to it.
OFF The port is not supply power to the device connected to it
or not connected.
System Specifications
Table 39 contains the system specifications of the Switch.
Table 39 System specifications of the Switch.
S
p
ecification V1905-24 V1905-24-PoE V1905-48
Physical dimensions
(H×W×D)
44 mm×440 mm×170
mm
44 mm×440 mm×238
mm
44 mm×440 mm×238
mm
Weight 1.6 kg 3.2 kg 2.9 kg
Console port 1 1 1
Ethernet port 24
24 (Each port can
provide a power
supply of 25 W)
48
Gigabit Combo port 2 2 2
AC Input voltage
Rated voltage range:
100–240V AC, 50/60
Hz
Rated voltage range:
100–240V AC, 50/60
Hz
Rated voltage range:
100–240V AC, 50/60
Hz
Power consumption (full
load) 17 W 205 W 26 W
Operating temperature 0°C to 40°C (32°F to 104°F)
Storage temperature –40°C to +70°C (–40°F to 158°F)
Operating humidity
(noncondensing) 5% to 95%
Storage humidity
(noncondensing) 5% to 95%

5
Installing the Switch
This section contains information that you need to install and set up the switch. It covers the following topics:
Before You Begin
Positioning the Switch
Rack-Mounting or Free-Standing
Supplying Power to the Switch
Checking for Correct Operation
Using SFP Transceivers
Performing Spot Checks
Before You Begin
Before installing or removing any components from the switch or carrying out any maintenance procedures,
read the Safety and Compliance Guide chapter in this guide.
Positioning the Switch
The switch is suitable for use in an office environment where it can be free-standing or mounted in a
standard 19-inch equipment rack.
Alternatively, the switch can be rack-mounted in a wiring closet or equipment room. A mounting kit,
containing two mounting brackets and four screws, is supplied with the switch.
When deciding where to position the switch, ensure that:
It is accessible and cables can be connected easily.
Cabling is away from sources of electrical noise. These include lift shafts, microwave ovens, and air
conditioning units. Electromagnetic fields can interfere with the signals on copper cabling and
introduce errors, thereby slowing down your network.
Water or moisture cannot enter the case of the unit.
Air flow around the unit and through the vents on the side of the case is not restricted (HP recommends
that you provide a minimum of 25 mm (1 in.) clearance).
The air is as free from dust as possible.
Temperature operating limits are not likely to be exceeded. HP recommends that the unit is installed in
a clean, air conditioned environment.
NOTE:
It is always good practice to wear an anti-static wrist strap connected to a ground point when installing
network equipment. If one is not available, try to keep in contact with a
g
rounded rack and avoid touchin
g
the unit's ports and connectors, if possible. Static discharge can cause reliability problems in your
equipment.

6
Rack-Mounting or Free-Standing
The unit can be mounted in a 19-inch equipment rack using the mounting kit or it can be free standing. Do
not place objects on top of the unit or stack.
CAUTION:
If installing the switch in a free-standing stack of different size Baseline or Super stack 3 units, the smaller
units must be installed above the larger ones. Do not have a free-standing stack of more than six units.
Using the Mounting Kit
The switch is supplied with two mounting brackets and four screws. These are used for rack mounting the
unit. When mounting the unit, refer to the guidelines given in Positioning the Switch.
The switch is 1U (1.7 inches) high and will fit in a standard 19-inch rack.
CAUTION:
Disconnect all cables from the unit before continuing. Remove the self-adhesive pads from the underside
of unit, if already fitted.
To rack-mount the switch:
1. Place the unit the right way up on a hard, flat surface with the front facing towards you.
2. Locate a mounting bracket over the mounting holes on one side of the unit.
3. Insert the two screws supplied in the mounting kit and fully tighten with a suitable screwdriver, as
shown in Figure 49.
Figure 49 Rack Mounting the Unit
4. Insert the unit into the 19-inch rack and secure with suitable screws (not provided), as shown in Figure
50

7
Figure 50 Mount the HP V1905 Switch to a rack
5. Reconnect the cables.
Placing Units On Top of Each Other
If the switch units are free-standing, up to six units can be placed one on top of the other. If you are mixing
a variety of Baseline and Super Stack units, the smaller units must be positioned at the top.
If you are placing switch units one on top of the other, you must use the self-adhesive rubber pads supplied.
Apply the pads to the underside of each switch, sticking one in the marked area at each corner.
Place the switch units on top of each other, ensuring that the pads of the upper unit line up with the recesses
of the lower unit.
Supplying Power to the Switch
Power problems can be the cause of serious failures and downtime in your network. Ensure that the power
input to your system is clean and free from sags and surges to avoid unforeseen network outages. HP
recommends that you install power conditioning, especially in areas prone to blackout, power dips and
electrical storms.
The unit is intended to be grounded. Ensure it is connected to earth ground during normal use. Installing
proper grounding helps to avoid damage from lightning and power surges.
CAUTION:
Before powering on the switch, verify that the network cables and the power cable are securely connected.
To power on the switch:
1. Plug the power cord into the power socket on the rear panel of the switch.
2. Plug the other end of the power cord into a power outlet.

8
Checking for Correct Operation
After you power on the switch, it automatically performs a power-on self-test (POST). During POST, the
Power LED on the front panel of the switch flashes green.
When POST is complete, the Power LED turns green. If the Power LED turns yellow after POST, it means that
POST failed and the switch has entered its fail-safe mode.
The following summarizes the possible colors for the Power LED after POST.
Table 40 Summarizes the possible colors for the Power LED after POST
Status Meaning
Green The unit is powered on and ready for use.
Yellow Power-on self-test or loop back test failed. The switch is in fail-safe mode. This can
happen if a port or ports fail when the switch was powered on.
Off
The unit is not receiving power.
Verify that the power cord is connected correctly, and then try powering on the
switch again
If the switch still does not operate, contact your HP network supplier
If POST fails, try the following:
Power off the switch, and then power it on again. Check the Power LED and see if POST was
successfully completed.
Reset the switch. See “Resetting to Factory Defaults.”
CAUTION:
Resetting the switch to its factory default erases all your settings. You will need to reconfigure the switch
after you reset it.
If these do not resolve the issue, please contact your HP network supplier for assistance.
Using SFP Transceivers
The following sections describe how to insert an SFP transceiver into an SFP slot.
NOTE:
SFP transceivers are hot-insertable and hot-swappable. You can remove them from and insert them into
any SFP port without having to power down the switch.
Inserting an SFP Transceiver
To be recognized as valid, the SFP transceiver must have the following characteristics:
1000BASE-SX or 1000BASE-LX media type:
1000BASE-SX SFP transceiver
Use this transceiver to connect the switch directly to a multimode fiber-optic cable.
1000BASE-LX SFP transceiver

9
Use this transceiver to connect the switch directly to a single mode fiber-optic cable or to multi-mode fiber
using a conditioned launch cable.
To activate the SFP port:
1. Hold the transceiver so that the fiber connector is toward you and the product label is visible, as shown
in Figure 51.Ensure the wire release lever is closed (in the upright position).
Figure 51 Inserting an SFP Transceiver
2. Gently slide the transceiver into the SFP slot until it clicks into place.
CAUTION:
SFP transceivers are keyed and can be properly inserted only one way. If the transceiver does not click
w
hen you insert it, remove it, turn it over, and reinsert it.
3. Remove the plastic protective cover, if fitted.
4. Connect the fiber cable.
5. Attach a male duplex LC connector on the network cable into the duplex LC connector on the
transceiver.
6. Connect the other end of the cable to a device fitted with an appropriate Gigabit Ethernet connection.
7. Check the Module Active LEDs on the front of the switch to ensure that the SFP transceiver is operating
correctly.
Removing an SFP Transceiver
To remove an SFP transceiver:
1. Disconnect the cable from the transceiver.
2. Move the wire release lever downwards until it is pointing toward you.
3. Pull the wire release lever toward you to release the catch mechanism.
The SFP transceiver should slide out easily.

10
Performing Spot Checks
At frequent intervals, you should visually check the switch. Regular checks can give you an early warning
of a possible failure; any problems can then be attended to when there will be least effect on users.
HP recommends periodically checking the items listed in Table 41.
Table 41 Items to Check
Item O
p
eration
Cooling fan Where possible, check that the cooling fan is operating by listening to the unit. The fan
is fitted near to the front right hand side of the unit (when viewed from the front).
Cabling Check that all external cabling connections are secure and that no cables are pulled
taut.
Configuring IP Address
The switch’s IP configuration is determined automatically using DHCP, or manually using values you assign.
By default, the switch will use its default IP information. The default IP address is 169.254.xxx.xxx. If the
MAC address is 08004E000102, the IP address would be 169.254.1.2.
Automatic IP Configuration using DHCP
When you use the automatic IP configuration method, the switch tries to obtain its IP information without
requesting user intervention from a DHCP server on the network.
You should use the automatic IP configuration method if:
Your network uses DHCP to allocate IP information, or
Flexibility is needed. If the switch is deployed onto a different subnet, it will automatically reconfigure
itself with an appropriate IP address, instead of you having to manually reconfigure the switch.
You can use ip address dhcp-alloc command to define automatic IP configuration method and use display
ip command to view the automatically allocated IP Information through the Console Port (see “CLI Reference
Guide”).
Manual IP Configuration
When you configure the IP information manually, the switch remembers the information that you enter until
you change it again.
You should use the manual IP configuration method if:
You do not have a DHCP server on your network, or
You want to remove the risk of the IP address ever changing, or
Your DHCP server does not allow you to allocate static IP addresses.

11
NOTE:
For most installations, HP recommends that you configure the switch IP information manually. This makes
management simpler and more reliable as it is not dependent on a DHCP server, and eliminates the risk
of the IP address changing.
You can use ip address command to configure the static IP for your switch through the Console Port (see “CLI
Reference Guide”).

12
Connecting To the Web Interface
The switch has a built-in Web interface that you can use to set the user password, change the IP address that
is assigned to the switch, and configure its advanced settings.
This chapter introduces the setting the menu items and buttons that are available on the Web interface. The
following topics are covered:
Requirements for Accessing the Web Interface
Choosing a Web Browser
Default User and Password
Logging On to the Web Interface
Navigating the Web Interface
Requirements for Accessing the Web Interface
To connect to the Web interface, you need the following:
Ensure that the switch is connected to the network using a Category 5 twisted pair Ethernet cable with
RJ-45 connectors.
Ensure that you know your switch’s IP address. See “Configuring IP Address”.
Check that your management workstation is on the same subnet as your switch.
Choose a suitable Web browser.
Choosing a Web Browser
To display the Web interface correctly, use one of the following Web browsers and platform combinations:
Table 42 Supported Web Browsers and Platforms
Browser Windows 2000
Windows XP Windows Vista
Internet Explorer 6 Yes Yes Yes
Internet Explorer 7 Yes Yes Yes
Firefox 3 Yes Yes Yes
Netscape 8 Yes Yes Yes
For the browser to operate the Web interface correctly, JavaScript and Cascading Style Sheets must be
enabled on your browser. These features are enabled on a browser by default. You will only need to enable
them if you have changed your browser settings.
Default User and Password
If you intend to manage the switch or to change the default password, you must log in with a valid user
name and password. The switch has one default user name. The default user is listed in Table 43.

13
Table 43 Default User and Password
User Name Default Password
Access Level
admin - Management: The user can access and change all
manageable parameters
Logging On to the Web Interface
To log on to the Web interface, do the following:
1. Open your Web browser and enter the IP address of the switch that you wish to manage in the address
bar (For example, in the following format: http://xxx.xxx.xxx.xxx). The Login Page appears:
Figure 52 Login Page
2. Enter admin as your user name and leave the password field blank.
3. Click Login. The main Web interface page is displayed.
Navigating the Web Interface
The Web interface has been designed to enable you to easily perform advanced configuration tasks and
view information about the switch.
Menu
The menu is located on the left side of the Web interface. When you click an item on the menu, the related
screen appears in the main part of the interface. Some menu items will give you sub-menu tabs to choose
from.

14
Figure 53 Switch Screen Layout
Table 44 Available Menu Items
Menu Item Descri
p
tion
Device Summary
Contains tabs that allow you to:
Provide a summary of the switch’s basic settings and versions of
current components.
Display the description for each color coded port.
Save Configuration Saves the switch’s configuration
Administration
IP Setup Allows you to setup, modify, or view the IP configuration
parameters.
ARP Setting Allows a host to communicate with other hosts when only the IP
address of its neighbors is known.
Backup & Restore Allows you to backup and restore the switch’s configuration.
Firmware Upgrade Allows you to upgrade the current firmware via TFTP or HTTP
Reset Allows you to reset the switch to factory default settings
System Access
Contains tabs that allow you to:
Display user summary information.
Create a new user.
Modify existing users.
Remove existing users.
System Name Allows you to set the system name.
System Time Allows you to set the system time.
Logging System Logs record and manage events and report errors and
informational messages
SNMP
Contains tabs that allow you to:
Add community strings.
Remove community strings.
Define SNMP traps
Remove SNMP traps

15
Menu Item Descri
p
tion
Device
VLAN
Contains tabs that allow you to:
Create a VLAN.
Modify a VLAN.
Modify VLAN membership for a port.
Rename a VLAN.
Remove a VLAN.
Display VLAN membership for a port.
Display VLAN information.
Spanning Tree
Allows you to configure a Spanning Tree Protocol.
Contains tabs that allow you to:
Display selected spanning tree information for every port.
Display individual port spanning tree information.
Modify the spanning tree settings for a port.
IGMP Snooping Allows you to enable or disable IGMP snooping and IGMP query
modes.
Broadcast Storm Allows you to enable or disable broadcast control.
ACL Configures the ACL.
MAC Based ACL Configures MAC Based ACL on the switch.
IP Based ACL Configures IP Based ACL on the switch.
ACL Binding Configures ACL Binding on the switch.
QoS Configures QoS settings.
CoS
Contains tabs that allow you to:
Displays CoS default settings assigned to ports.
Defines CoS
Queue Configures Queue Setting.
CoS to Queue Displays and defines CoS to Queue.
DSCP to Queue Contains fields for mapping DSCP settings to traffic queues.
Trust Configures Trust Settings.
Bandwidth Displays and defines Bandwidth Settings.
VoIP Traffic Setting
Contains tabs that allow you to:
Display Voice VLAN summary.
Configure Voice VLAN global settings.
Configure Voice VLAN port settings.
Display port information for Voice VLAN.
Display OUI summary.
Add or remove OUI.
LLDP Allows you to configure LLDP global and port settings.