HP 5800-48G with 2 Slots User manual

HP 5820X & 5800 Switch Series
Installation Guide
Part number: 5998-1609
Document version: 6W103-20140619

Legal and notice information
© Copyright 2014 Hewlett-Packard Development Company, L.P.
No part of this documentation may be reproduced or transmitted in any form or by any means without
prior written consent of Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing, performance, or
use of this material.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein.

i
Contents
Preparing for installation ············································································································································· 1
Safety recommendations ··················································································································································2
Examining the installation site ·········································································································································2
Temperature/humidity ·············································································································································2
Cleanness··································································································································································3
EMI·············································································································································································3
Laser safety································································································································································4
Installation tools·································································································································································4
Installing the switch······················································································································································ 5
Installing the switch in a 19-inch rack·····························································································································7
Installation prerequisites ··········································································································································7
Mounting bracket and cable management bracket kits·······················································································7
Rack mounting rail kit ··············································································································································8
Rack-mounting procedures at a glance··················································································································8
Attaching the mounting brackets, chassis rails, and grounding cable to the chassis
(5800AF-48G/5820AF-24XG)··························································································································· 10
Attaching the mounting brackets to the chassis (for all the switches except the 5800AF-48G/5820AF-24XG)
················································································································································································ 12
Rack-mounting a 5800AF-48G/5820AF-24XG switch···················································································· 14
Rack-mounting a 5800/5820X switch except the 5800AF-48G/5820AF-24XG ········································ 15
Mounting the switch on a workbench·························································································································· 17
Grounding the switch ···················································································································································· 17
Grounding the switch with a grounding strip····································································································· 17
Grounding the switch by using the AC power cord·························································································· 20
Installing/removing a fan tray······································································································································ 21
Installing a fan tray ··············································································································································· 21
Removing a fan tray·············································································································································· 22
Installing/removing a power supply ···························································································································· 23
5800AF-48G/5820AF-24XG ····························································································································· 23
5800-48G-PoE+ (2 slots)/5800-48G-PoE+ TAA (2 slots)/5800-24G-SFP (1 slot)/5800-24G-SFP TAA (1
slot)/all the 5820X switches but the 5820AF-24XG························································································· 26
Connecting the power cord ·········································································································································· 28
Connecting an AC power cord to the switch····································································································· 28
Connecting the switch to a –54 VDC output RPS ······························································································ 29
Connecting the switch to a 12 VDC output RPS ································································································ 30
Connecting the PSR150-A/PSR150-A1 power supply······················································································ 31
Connecting the PSR150-D/PSR150-D1 power supply to a –48 VDC power source ···································· 31
Connecting the PSR150-D/PSR150-D1 power supply to a –54 VDC output RPS ········································· 32
Connecting the PSR300-12A/PSR300-12A2 power supply ············································································ 32
Connecting the PSR300-12D1/PSR300-12D2 power supply to a –48 VDC power source ························ 33
Connecting the PSR300-12D1/PSR300-12D2 power supply to a –54 VDC output RPS ····························· 34
Connecting the PSR750-A power supply············································································································ 34
Connecting the 650 W AC/300 W AC power supply ··················································································· 34
Connecting the 650 W DC/300 W DC power supply ··················································································· 35
Installing/removing an interface card ························································································································· 35
Installing an interface card··································································································································· 36
Removing an interface card ································································································································· 37
Installing/removing an OAP card································································································································ 37

ii
Installing an OAP card in the OAP card slot ····································································································· 37
Removing the OAP card in the OAP card slot ··································································································· 39
Installing an OAP card in an expansion interface card slot············································································· 39
Removing the OAP card in an expansion interface card slot ·········································································· 40
Installing/removing a PoE module ······························································································································· 40
Installing a PoE module········································································································································· 40
Removing the PoE module ···································································································································· 40
Verifying the installation················································································································································ 41
Accessing the switch for the first time·······················································································································42
Setting up the configuration environment···················································································································· 42
Connecting the console cable ······································································································································ 42
Setting terminal parameters ·········································································································································· 43
Powering on the switch·················································································································································· 46
Setting up an IRF fabric ·············································································································································47
IRF fabric setup flowchart·············································································································································· 47
Planning IRF fabric setup··············································································································································· 48
Planning IRF fabric size and the installation site································································································ 48
Identifying the master switch and planning IRF member IDs ············································································ 48
Planning IRF topology and connections ·············································································································· 49
Identifying physical IRF ports on the member switches ····················································································· 50
Planning the cabling scheme ······························································································································· 51
Configuring basic IRF settings······································································································································· 54
Connecting the physical IRF ports ································································································································ 54
Verifying the IRF fabric setup ········································································································································ 55
Maintenance and troubleshooting····························································································································56
Password loss ································································································································································· 56
Console login password loss ······························································································································· 56
Boot ROM password loss ····································································································································· 56
Power supply failure ······················································································································································ 56
Built-in power supply failure ································································································································· 56
Hot swappable power supply failure·················································································································· 58
OAP card failure ···························································································································································· 59
Failure of the OAP card in the OAP card slot···································································································· 59
Failure of the OAP card in an expansion interface card slot ··········································································· 59
Hot swappable PoE module failure······························································································································ 59
Fan failure······································································································································································· 60
Built-in fan failure··················································································································································· 60
Hot swappable fan tray failure···························································································································· 60
Configuration terminal problems·································································································································· 61
Support and other resources ·····································································································································62
Contacting HP ································································································································································ 62
Subscription service ·············································································································································· 62
Related information························································································································································ 62
Documents······························································································································································ 62
Websites································································································································································· 62
Conventions ···································································································································································· 63
Appendix A Chassis views and technical specifications ························································································65
Chassis views ································································································································································· 65
5800-48G-PoE+ (2 slots)/5800-48G-PoE+ TAA (2 slots) ················································································ 65
5800-48G (1 slot)/5800-48G TAA (1 slot)······································································································· 66
5800-48G-PoE+ (1 slot)/5800-48G-PoE+ TAA (1 slot) ··················································································· 68
5800AF-48G ························································································································································· 69

iii
5800-24G/5800-24G TAA ································································································································ 71
5800-24G-PoE+/5800-24G-PoE+TAA ·············································································································· 72
5800-24G-SFP (1 slot)/5800-24G-SFP TAA (1 slot)························································································· 73
5820AF-24XG······················································································································································· 74
5820X-24XG-SFP+/5820X-24XG-SFP+ TAA ···································································································· 75
5820X-14XG-SFP+ (2 slots)/5820X-14XG-SFP+ TAA (2 slots)········································································ 76
Physical specifications ··················································································································································· 77
Chassis dimensions and weights ························································································································· 77
Ports and slots (5800 switches) ··························································································································· 78
Ports and slots (5820X switches) ························································································································· 79
Environmental specifications········································································································································· 79
Power specifications ······················································································································································ 80
AC-input power specifications ····························································································································· 80
DC-input power specifications ····························································································································· 81
RPS DC-input power specifications······················································································································ 82
Appendix B FRUs and compatibility matrixes··········································································································83
Hardware compatibility matrixes ································································································································· 83
Power supply compatibility matrix······················································································································· 83
Fan tray compatibility matrix ······························································································································· 85
Interface card compatibility matrix······················································································································ 86
PoE module compatibility matrix (only for the 5800 switches) ········································································ 87
OAP card compatibility matrix ···························································································································· 87
RPS compatibility matrix ······································································································································· 88
Hot swappable power supplies···································································································································· 89
Hot swappable fan trays··············································································································································· 90
Interface cards································································································································································ 91
OAP cards ······································································································································································ 92
Hot swappable PoE modules ········································································································································ 92
Appendix C Ports and LEDs ······································································································································93
Ports ················································································································································································· 93
Console port ·························································································································································· 93
Management Ethernet port··································································································································· 93
USB port ································································································································································· 93
10/100/1000Base-T Ethernet port ···················································································································· 94
100/1000Base-X SFP port··································································································································· 94
SFP+ port································································································································································ 95
LEDs ················································································································································································· 97
System status LED··················································································································································· 98
Power supply status LED ······································································································································· 99
RPS status LED························································································································································ 99
Port mode LED······················································································································································100
Seven-segment LED··············································································································································100
10/100/1000Base-T Ethernet port LED···········································································································101
100/1000Base-X SFP port LED ·························································································································102
SFP+ port LED ······················································································································································102
Management Ethernet port LEDs························································································································103
OAP card status LED ···········································································································································103
PoE module status LED ········································································································································103
Interface card status LED·····································································································································104
Appendix D Cooling system··································································································································· 105
5800-48G-PoE+ (2 slots)/5800-48G-PoE+ TAA (2 slots)·······················································································105
5800-48G (1 slot)/5800-48G TAA (1 slot) ·············································································································107
5800-48G-PoE+ (1 slot)/5800-48G-PoE+ TAA (1 slot) ··························································································108

iv
5800AF-48G································································································································································109
5800-24G/5800-24G TAA·······································································································································111
5800-24G-PoE+/5800-24G-PoE+TAA·····················································································································112
5800-24G-SFP (1 slot)/5800-24G-SFP TAA (1 slot) ·······························································································113
5820AF-24XG······························································································································································114
5820X-24XG-SFP+/5820X-24XG-SFP+ TAA ···········································································································116
5820X-14XG-SFP+ (2 slots)/5820X-14XG-SFP+ TAA (2 slots) ··············································································117
Index ········································································································································································ 120

1
Preparing for installation
The HP 5800 Switch Series includes the models in Table 1 and the HP 5820X Switch Series includes the
models in Table 2.
Table 1 HP 5800 Switch Series models
Product
code HP description Alias
JC101A HP 5800-48G-PoE+ Switch with 2 Interface Slots 5800-48G-PoE+ (2 slots)
JG242A HP 5800-48G-PoE+ TAA Switch with 2 Interface Slots 5800-48G-PoE+ TAA (2 slots)
JC105A HP 5800-48G Switch with 1 Interface Slot 5800-48G (1 slot)
JG258A HP 5800-48G TAA Switch with 1 Interface Slot 5800-48G TAA (1 slot)
JC104A HP 5800-48G-PoE+ Switch with 1 Interface Slot 5800-48G-PoE+ (1 slot)
JG257A HP 5800-48G-PoE+ TAA Switch with 1 Interface Slot 5800-48G-PoE+ TAA (1 slot)
JC100A HP 5800-24G Switch 5800-24G
JG255A HP 5800-24G TAA Switch 5800-24G TAA
JC099A HP 5800-24G-PoE+ Switch 5800-24G-PoE+
JG254A HP 5800-24G-PoE+TAA Switch 5800-24G-PoE+TAA
JC103A HP 5800-24G-SFP Switch with 1 Interface Slot 5800-24G-SFP (1 slot)
JG256A HP 5800-24G-SFP TAA Switch with 1 Interface Slot 5800-24G-SFP TAA (1 slot)
JG225A HP 5800AF-48G Switch 5800AF-48G
IMPORTANT:
For regulatory identification purposes, the HP 5800AF-48G switch is assigned a regulatory model
number (RMN) BJNGA-AD0002. This regulatory number should not be confused with the marketing
name HP 5800AF, or product code JG225A.
Table 2 HP 5820X Switch Series models
Product
code HP description Alias
JG219A HP 5820AF-24XG Switch 5820AF-24XG
JC102A HP 5820X-24XG-SFP+ Switch 5820X-24XG-SFP+
JG243A HP 5820X-24XG-SFP+ TAA-compliant Switch 5820X-24XG-SFP+ TAA
JC106A HP 5820X-14XG-SFP+ Switch with 2 Interface Slots 5820X-14XG-SFP+ (2 slots)
JG259A HP 5820X-14XG-SFP+ TAA Switch with 2 Interface Slots 5820X-14XG-SFP+ TAA (2 slots)

2
IMPORTANT:
For regulatory identification purposes, the HP 5820AF-24XG switch is assigned a regulatory model
number (RMN) BJNGA-AD0001. This regulatory number should not be confused with the marketing
name HP 5820AF, or product code JG219A.
Safety recommendations
W
ARNING!
Read all of the safety instructions in the
Compliance and Safety Gui de supplied with your device before
installation and operation.
To avoid any equipment damage or bodily injury, read the following safety recommendations before
installation. Note that the recommendations do not cover every possible hazardous condition. For more
information, see the Compliance and Safety Guide included with your device.
•Before cleaning the switch, remove the power cords from the switch. Do not clean the switch with
wet cloth or liquid.
•Do not place the switch near water or in a damp environment. Prevent water or moisture from
entering the switch chassis.
•Do not place the switch on an unstable case or desk. The switch might be severely damaged in case
of a fall.
•Ensure good ventilation of the equipment room and keep the ventilation vents of the switch free of
obstruction.
•Connect the yellow-green protection grounding cable before power-on.
•Make sure that the operating voltage is in the range labeled on the power supply of the switch.
•To avoid electrical shocks, do not open the chassis when the switch is operating or when the switch
is just powered off.
•When replacing FRUs, wear an ESD wrist strap to avoid damaging the units.
Examining the installation site
The switch must be used indoors. You can mount your switch in a rack or on a workbench, but make sure:
•Adequate clearance is reserved at the air inlet and exhaust vents for ventilation.
•The rack or workbench has a good ventilation system.
•The rack is sturdy enough to support the switch and its accessories.
•The rack or workbench is correctly earthed.
To ensure normal operation and long service life of your switch, install it in an environment that meets the
requirements described in the following subsections.
Temperature/humidity
Maintain appropriate temperature and humidity in the equipment room.
•Lasting high relative humidity can cause poor insulation, electricity creepage, mechanical property
change of materials, and metal corrosion.

3
•Lasting low relative humidity can cause washer contraction and ESD and bring problems including
loose captive screws and circuit failure.
•High temperature can accelerate the aging of insulation materials and significantly lower the
reliability and lifespan of the switch.
For the temperature and humidity requirements of different switch models, see "Environmental
specifications."
Cleanness
Dust buildup on the chassis might result in electrostatic adsorption, which causes poor contact of metal
components and contact points, especially when indoor relative humidity is low. In the worst case,
electrostatic adsorption can cause communication failure.
Table 3 Dust concentration limit in the equipment room
Substance Concentration limit (
p
articles/m³)
Dust ≤3 x 104 (no visible dust on the tabletop over three days)
NOTE:
Dust diameter ≥5 μm
The equipment room must also meet strict limits on salts, acids, and sulfides to eliminate corrosion and
premature aging of components, as shown in Table 4.
Table 4 Harmful gas limits in the equipment room
Gas Maximum concentration (m
g
/m3)
SO20.2
H2S 0.006
NH30.05
Cl20.01
EMI
All electromagnetic interference (EMI) sources, from outside or inside of the switch and application
system, adversely affect the switch in the following ways:
•A conduction pattern of capacitance coupling.
•Inductance coupling.
•Electromagnetic wave radiation.
•Common impedance (including the grounding system) coupling.
To prevent EMI, use the following guidelines:
•If AC power is used, use a single-phase three-wire power receptacle with protection earth (PE) to
filter interference from the power grid.
•Keep the switch far away from radio transmitting stations, radar stations, and high-frequency
devices.
•Use electromagnetic shielding when necessary. For example, use shielded interface cables.

4
Laser safety
W
ARNING!
Do not stare into any fiber port when the switch has power. The laser li
g
ht emitted from the optical fiber
might hurt your eyes.
The HP 5800 and HP 5820X switches are Class 1 laser devices.
Installation tools
•Flat-blade screwdriver
•Phillips screwdriver
•ESD wrist strap
All these installation tools are user supplied.

5
Installing the switch
CAUTION:
Keep the tamper-proof seal on a mountin
g
screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence.

6
Figure 1 Hardware installation flow
Ground the switch
Install the switch
Start
Connect power cords
Verify the installation
Power on the switch
Select and install power
supplies
Hot-swap power
supplies?
Yes
No
Operating correctly? Power off the switch
Troubleshoot the
switch
No
Yes
Hot-swap cards?
Install PoE modules
Install interface cardsInstall OAP cards
Select cards
Yes
Operating correctly? Troubleshoot the
switch
Verify card installation
Yes
No
End
No
Hot-swap
fan trays?
Select and install fan
trays
Yes
No
Fan trays installed?
No
Yes

7
Installing the switch in a 19-inch rack
Installation prerequisites
The rack depth for the 5800AF-48G and 5820AF-24XG switches must be 1000 mm (39.37 in).
Mounting bracket and cable management bracket kits
Table 5 describes the mounting bracket and cable management bracket kits shipped with the switch.
Table 5 Mounting bracket and cable management bracket kits
Chassis Mounting brackets
Cable
management
brackets
Bracket view
•All 5800 switches except the
5800-48G-PoE+ (2 slots) and
5800-48G-PoE+ TAA (2 slots)
•5820AF-24XG
•5820X-24XG-SFP+
•5820X-24XG-SFP+ TAA
One pair of 1U mounting
brackets (supplied with
the switch)
N/A See Figure 2.
•5800-48G-PoE+ (2 slots)
•5800-48G-PoE+ TAA (2 slots)
•5820X-14XG-SFP+ (2 slots)
•5820X-14XG-SFP+ TAA (2 slots)
One pair of 2U mounting
brackets (supplied with
the switch)
One pair
(standard)
The mounting
brackets and cable
management
brackets are secured
together by default
(see Figure 3).
Figure 2 1U mounting bracket kit

8
Figure 3 2U cable management bracket and mounting bracket kit
(1) Cable management bracket (2) Mounting bracket
Rack mounting rail kit
The 5800AF-48G and 5820AF-24XG switches come with a pair of chassis rails and a pair of slide rails.
Figure 4 Rack mounting rail kit
(1) Chassis rail (2) Slide rail
Rack-mounting procedures at a glance
You can install the switch in a 19-inch rack by using different rack mounting positions. Use Table 6 to
identify the rack-mounting procedure for your switch.
1 2
1 2

9
Table 6 Rack-mounting procedures at a glance
Chassis Procedure
dia
g
ram
Procedure references
•5800-48G-PoE+ (2 slots)
•5800-48G-PoE+ TAA (2 slots)
•5820X-14XG-SFP+ (2 slots)
•5820X-14XG-SFP+ TAA (2 slots)
Figure 5
1. Attaching the mounting brackets to the chassis (for
all the switches except the
5800AF-48G/5820AF-24XG).
2. Rack-mounting a 5800/5820X switch except the
5800AF-48G/5820AF-24XG.
•5800AF-48G
•5820AF-24XG Figure 6
1. Attaching the mounting brackets, chassis rails, and
grounding cable to the chassis
(5800AF-48G/5820AF-24XG).
2. Rack-mounting a 5800AF-48G/5820AF-24XG
switch.
•All other 5800 switches
•5820X-24XG-SFP+
•5820X-24XG-SFP+ TAA
Figure 7
1. Attaching the mounting brackets to the chassis (for
all the switches except the
5800AF-48G/5820AF-24XG).
2. Rack-mounting a 5800/5820X switch except the
5800AF-48G/5820AF-24XG.
Figure 5 Rack-mounting procedure (1)
Figure 6 Rack-mounting procedure (2)
Figure 7 Rack-mounting procecure (3)
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack with the mounting brackets.

10
Attaching the mounting brackets, chassis rails, and grounding
cable to the chassis (5800AF-48G/5820AF-24XG)
The 5800AF-48G and 5820AF-24XG switches have one front mounting position (near the network ports)
and one rear mounting position (near the power supplies). The switches also have one primary
grounding point (with a grounding sign) and two auxiliary grounding points. Use the primary grounding
point whenever possible. If the primary grounding point fails or is not suitable for the installation site, use
one of the auxiliary grounding points.
Figure 8 Identifying the mounting and grounding positions
(1) Auxiliary
g
roundin
g
point 2 (2) Rear mountin
g
position
(3) Primary grounding point (4) Auxiliary grounding point 1
(5) Front mountin
g
position
Attaching the mounting brackets and chassis rails to the chassis
1. Align the mounting brackets with the screw holes in the rear mounting position (see Figure 9) or
front mounting position (see Figure 10).
2. Use M4 screws (supplied with the switch) to attach the mounting brackets to the chassis.
3. Align the chassis rails with the rail mounting holes in the chassis:
{If the mounting brackets are in the rear mounting position, align the chassis rails with the screw
holes at the front of the side panels (see Figure 9).
{If the mounting brackets are in the front mounting position, align the chassis rails with the screw
holes at the rear of the side panels (see Figure 10).
4. Use M4 screws (supplied with the switch) to attach the chassis rails to the chassis.
NOTE:
Secure the mounting brackets and chassis rails to both sides of the chassis in the same way.

11
Connecting the grounding cable to the chassis
CAUTION:
The primary grounding point and auxiliary grounding point 1 are located on the left side panel. If you use
one of these grounding points, you must connect the grounding cable to the grounding point before you
mount the switch in the rack.
NOTE:
•HP recommends that you use the primary grounding point or auxiliary
g
roundin
g
point 1 because the
grounding cable and grounding screw that come with the switch are suitable only for these two
grounding points.
•To use auxiliary grounding point 2, you must prepare a grounding cable yourself.
To connect the grounding cable to a chassis grounding point, for example, the primary grounding point:
1. Choose a grounding point.
2. Unpack the grounding cable and grounding screws.
You can use the cable and screws shipped with the switch only for connecting to the primary
grounding point or auxiliary grounding point 1.
3. Align the two-hole grounding lug at one end of the cable with the grounding holes of the
grounding point, insert the grounding screws into the holes, and tighten the screws with a
screwdriver to attach the grounding lug to the chassis, as shown in Figure 9.
Figure 9 Attaching the rear mounting brackets/chassis rails/grounding cable to the chassis

12
Figure 10 Attaching the front mounting brackets/chassis rails to the chassis
Attaching the mounting brackets to the chassis (for all the
switches except the 5800AF-48G/5820AF-24XG)
All 5800 and 5820X switches except the 5800AF-48G and the 5820AF-24XG have three mounting
positions: one front mounting position (near the network ports), one mid-mounting position, and one rear
mounting position (near the power supplies).
To attach the mounting brackets in one of these positions:
1. Align one mounting bracket with the screw holes in the front-mounting position (Figure 11),
mid-mounting position (Figure 12), or the rear-mounting position (Figure 13).
These figures show attaching a 1U bracket to a 1U switch chassis. To attach a 2U bracket to a 2U
switch chassis, see Figure 14.
2. Use M4 screws (supplied with the switch) to attach the mounting bracket to the chassis.
3. Repeat the proceeding steps to attach the other mounting bracket to the chassis.
Figure 11 1U mounting bracket front mounting position
Figure 12 1U bracket mid-mounting position

13
Figure 13 1U bracket rear mounting position
Figure 14 2U bracket front mounting position
NOTE:
•Installing the 2U mounting brackets in the rear mounting position is the same as installin
g
the brackets
in the front mounting position.
•To install the 2U mounting brackets in the mid-mounting position of a 2U switch chassis, first use a
screwdriver to loosen the three captive screws and separate the mounting brackets from the cable
management brackets (see Figure 15).
Figure 15 Separating a cable management bracket from a mounting bracket
(1) Captive screws (2) Cable management bracket (3) Mounting bracket

14
Rack-mounting a 5800AF-48G/5820AF-24XG switch
Attaching the slide rails to the rack
You must install slide rails for rack-mounting a 5800AF-48G or 5820AF-24XG switch.
To attach the slide rails to the rack:
1. Identify the rack attachment position for the slide rails.
2. Install cage nuts (user-supplied) in the mounting holes in the rack posts.
3. Align the screw holes in one slide rail with the cage nuts in the rack post on one side, and use
screws (user supplied) to attach the slide rail to the rack, as shown in Figure 16.
4. Repeat the preceding step to attach the other slide rail to the rack post on the other side.
Keep the two slide rails at the same height so the slide rails can attach into the chassis rails.
Figure 16 Installing the slide rails
Mounting the switch in the rack
This task requires two people. To mount the switch in the rack:
1. Wear an ESD wrist strap and make sure it makes good skin contact and is correctly grounded.
2. Verify that the mounting brackets and chassis rails have been securely attached on the two sides
of the switch.
3. Verify that the slide rails have been correctly attached to the rear rack posts.
4. Install cage nuts (user-supplied) to the front rack posts and make sure they are at the same level as
the slide rails.
5. Supporting the bottom of the switch, align the chassis rails with the slide rails on the rack posts, as
shown in Figure 17. Work with another person to slide the chassis rails along the slide rails until
the mounting brackets are flush with the rack posts.
6. Use screws (user-supplied) to attach the mounting brackets to the rack, as shown in Figure 18.