HP Compaq Presario,Presario 1910 User manual
HP 1910 Switch Series
User Guide
Part number: 5998-2269
Software version: Release 1511
Document version: 6W100-20120528
Legal and notice information
© Copyright 2012 Hewlett-Packard Development Company, L.P.
No part of this documentation may be reproduced or transmitted in any form or by any means without
prior written consent of Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing, performance, or
use of this material.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein.
i
Contents
Overview ······································································································································································ 1
Configuration through the Web interface ·················································································································· 2
Logging in to the Web interface······································································································································2
Logging out of the Web interface ···································································································································3
Introduction to the Web interface····································································································································3
Web user level ··································································································································································4
Introduction to the Web-based NM functions················································································································4
Introduction to the common items on the Web pages ······························································································· 12
Configuration guidelines ··············································································································································· 16
Troubleshooting web console ······································································································································· 17
Unable to access devices through the web console ·························································································· 17
Configuration at the CLI·············································································································································20
Getting started with the CLI··········································································································································· 20
Setting up the configuration environment ··········································································································· 20
Setting terminal parameters·································································································································· 21
Logging in to the CLI ············································································································································· 24
CLI commands ································································································································································ 24
initialize·································································································································································· 25
ipsetup ···································································································································································· 25
ipsetup ipv6 ··························································································································································· 26
password································································································································································ 26
ping········································································································································································· 27
ping ipv6································································································································································ 27
quit ·········································································································································································· 28
reboot ····································································································································································· 29
summary ································································································································································· 29
upgrade·································································································································································· 30
upgrade ipv6 ························································································································································· 31
Configuration example for upgrading the system software image at the CLI ························································· 32
Configuration wizard·················································································································································34
Overview········································································································································································· 34
Basic service setup ························································································································································· 34
Entering the configuration wizard homepage···································································································· 34
Configuring system parameters ··························································································································· 34
Configuring management IP address·················································································································· 35
Finishing configuration wizard ···························································································································· 37
Configuring stack·······················································································································································39
Overview········································································································································································· 39
Configuration task list ···················································································································································· 39
Configuring global stack parameters··························································································································· 40
Configuring stack ports ················································································································································· 42
Displaying topology summary of a stack ···················································································································· 42
Displaying device summary of a stack ························································································································ 42
Logging in to a member device from the master ········································································································ 43
Stack configuration example ········································································································································ 43
Configuration guidelines ··············································································································································· 49
ii
Displaying system and device information················································································································· 1
Displaying system information·········································································································································1
Displaying basic system information······················································································································1
Displaying the system resource state······················································································································2
Displaying recent system logs ·································································································································2
Displaying the refresh period··································································································································2
Displaying device information ·········································································································································2
Configuring basic device settings······························································································································· 4
Overview············································································································································································4
Configuring system name·················································································································································4
Configuring idle timeout period ······································································································································4
Maintaining devices····················································································································································· 6
Software upgrade ·····························································································································································6
Device reboot ····································································································································································7
Electronic label ··································································································································································8
Diagnostic information ·····················································································································································8
Configuring system time ············································································································································10
System time overview ···················································································································································· 10
Displaying the current system date and time ·············································································································· 10
Manually configuring the system date and time········································································································· 10
Configuring network time·············································································································································· 11
Date and time configuration example ························································································································· 12
Configuration guidelines ··············································································································································· 13
Configuring syslogs····················································································································································14
Overview········································································································································································· 14
Displaying syslogs·························································································································································· 14
Setting the log host························································································································································· 15
Setting buffer capacity and refresh interval ················································································································ 16
Managing the configuration······································································································································18
Backing up configuration ·············································································································································· 18
Restoring configuration·················································································································································· 18
Saving configuration······················································································································································ 19
Resetting configuration ·················································································································································· 20
Managing files ···························································································································································21
Displaying files ······························································································································································· 21
Downloading a file ························································································································································ 21
Uploading a file ····························································································································································· 22
Removing a file······························································································································································· 22
Managing ports··························································································································································23
Overview········································································································································································· 23
Configuring a port ························································································································································· 23
Setting operation parameters for a port ············································································································· 23
Displaying port operation parameters ················································································································ 28
Port management configuration example···················································································································· 29
Configuring port mirroring ········································································································································34
Terminologies of port mirroring···································································································································· 34
Mirroring source···················································································································································· 34
Mirroring destination ············································································································································ 34
Mirroring direction ················································································································································ 34
Mirroring group····················································································································································· 34
iii
Port mirroring implementation ······································································································································ 34
Recommended configuration procedures···················································································································· 35
Configuring a mirroring group ···························································································································· 35
Configuring ports for a mirroring group············································································································· 36
Local port mirroring configuration example················································································································ 38
Network requirements··········································································································································· 38
Adding a local mirroring group ·························································································································· 38
Configuring the mirroring ports as GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 ···························· 39
Configuring the monitor port as GigabitEthernet 1/0/3·················································································· 40
Configuration guidelines ··············································································································································· 41
Managing users ·························································································································································42
Adding a local user ······················································································································································· 42
Setting the super password ··········································································································································· 43
Switching to the management level ····························································································································· 44
Configuring a loopback test······································································································································45
Overview········································································································································································· 45
Configuring a loopback test ········································································································································· 45
Configuration guidelines ··············································································································································· 46
Configuring VCT ························································································································································47
Overview········································································································································································· 47
Testing cable status ························································································································································ 47
Configuring the flow interval·····································································································································48
Overview········································································································································································· 48
Setting the traffic statistics generating interval············································································································ 48
Viewing port traffic statistics ········································································································································· 48
Configuring storm constrain ······································································································································50
Overview········································································································································································· 50
Setting the traffic statistics generating interval············································································································ 50
Configuring storm constrain·········································································································································· 51
Configuring RMON ···················································································································································53
Overview········································································································································································· 53
Working mechanism············································································································································· 53
RMON groups ······················································································································································· 53
RMON configuration task list ······································································································································· 55
Configuring a statistics entry································································································································ 57
Configuring a history entry··································································································································· 58
Configuring an event entry··································································································································· 59
Configuring an alarm entry·································································································································· 60
Displaying RMON statistics·································································································································· 62
Displaying RMON history sampling information······························································································· 64
Displaying RMON event logs ······························································································································ 65
RMON configuration example ····································································································································· 65
Configuring energy saving········································································································································70
Energy saving overview ················································································································································ 70
Configuring energy saving on a port ·························································································································· 70
Configuring SNMP·····················································································································································72
Overview········································································································································································· 72
SNMP mechanism ················································································································································· 72
SNMP protocol versions ······································································································································· 73
Recommended configuration procedure······················································································································ 73
iv
Enabling SNMP agent ·········································································································································· 74
Configuring an SNMP view·········································································································································· 76
Creating an SNMP view······································································································································· 76
Adding rules to an SNMP view ··························································································································· 77
Configuring an SNMP community ······························································································································· 78
Configuring an SNMP group········································································································································ 79
Configuring an SNMP user··········································································································································· 81
Configuring the SNMP trap function···························································································································· 83
Displaying SNMP packet statistics ······························································································································· 84
SNMPv1/v2c configuration example·························································································································· 85
SNMPv3 configuration example ·································································································································· 88
Displaying interface statistics ····································································································································94
Overview········································································································································································· 94
Displaying interface statistics········································································································································ 94
Configuring VLANs····················································································································································96
VLAN overview······························································································································································· 96
VLAN fundamentals··············································································································································· 96
VLAN types ···························································································································································· 97
Port-based VLAN ··················································································································································· 98
Recommended VLAN configuration procedures········································································································· 99
Assigning an access port to a VLAN ·················································································································· 99
Assigning a trunk port to a VLAN······················································································································100
Assigning a hybrid port to a VLAN···················································································································100
Creating VLANs ···························································································································································101
Configuring the link type of a port·····························································································································102
Setting the PVID for a port···········································································································································103
Selecting VLANs···························································································································································104
Modifying a VLAN·······················································································································································105
Modifying ports····························································································································································107
VLAN configuration example······································································································································108
Configuration guidelines ·············································································································································112
Configuring VLAN interfaces ································································································································· 113
Overview·······································································································································································113
Creating a VLAN interface··········································································································································113
Modifying a VLAN interface·······································································································································115
Configuration guidelines ·············································································································································117
Configuring a voice VLAN ····································································································································· 119
Overview·······································································································································································119
OUI addresses ·····················································································································································119
Voice VLAN assignment modes·························································································································120
Security mode and normal mode of voice VLANs···························································································121
Recommended voice VLAN configuration procedure ······························································································122
Configuring voice VLAN globally ······························································································································123
Configuring voice VLAN on ports ······························································································································124
Adding OUI addresses to the OUI list ·······················································································································125
Voice VLAN configuration examples ·························································································································126
Configuring voice VLAN on a port in automatic voice VLAN assignment mode·········································126
Configuring a voice VLAN on a port in manual voice VLAN assignment mode ·········································131
Configuration guidelines ·············································································································································136
Configuring MAC address tables ·························································································································· 138
Overview·······································································································································································138
How a MAC address table entry is created·····································································································138
v
Types of MAC address table entries ·················································································································139
Displaying and configuring MAC address entries ···································································································139
Setting the aging time of MAC address entries········································································································140
MAC address configuration example························································································································141
Configuring MSTP··················································································································································· 143
STP ·················································································································································································143
STP protocol packets ···········································································································································143
Basic concepts in STP··········································································································································143
How STP works····················································································································································144
RSTP···············································································································································································150
MSTP··············································································································································································150
Why MSTP ···························································································································································150
Basic concepts in MSTP ······································································································································151
How MSTP works ················································································································································155
Implementation of MSTP on devices··················································································································156
Protocols and standards ·····································································································································156
Recommended MSTP configuration procedure·········································································································156
Configuring an MST region ········································································································································156
Configuring MSTP globally ·········································································································································158
Configuring MSTP on a port·······································································································································160
Displaying MSTP information of a port ·····················································································································162
MSTP configuration example······································································································································164
Configuration guidelines ·············································································································································169
Configuring link aggregation and LACP··············································································································· 170
Overview·······································································································································································170
Basic concepts of link aggregation ···················································································································170
Link aggregation modes ·····································································································································171
Recommended link aggregation and LACP configuration procedures ··································································173
Creating a link aggregation group····························································································································173
Displaying information of an aggregate interface ···································································································174
Setting LACP priority····················································································································································176
Displaying information of LACP-enabled ports ·········································································································176
Link aggregation and LACP configuration example·································································································178
Configuration guidelines ·············································································································································180
Configuring LLDP····················································································································································· 182
Overview·······································································································································································182
Background··························································································································································182
Basic concepts ·····················································································································································182
Operating modes of LLDP···································································································································186
How LLDP works ··················································································································································186
Compatibility of LLDP with CDP··································································································································187
Protocols and standards ··············································································································································187
Recommended LLDP configuration procedure···········································································································187
Enabling LLDP on ports ················································································································································188
Configuring LLDP settings on ports ·····························································································································189
Setting LLDP parameters for a single port ·········································································································189
Configuring LLDP settings for ports in batch·····································································································192
Configuring global LLDP setup····································································································································193
Displaying LLDP information for a port ······················································································································195
Displaying global LLDP information ···························································································································201
Displaying LLDP information received from LLDP neighbors····················································································203
LLDP configuration examples ······································································································································204
LLDP basic settings configuration example ·······································································································204
vi
CDP-compatible LLDP configuration example···································································································210
LLDP configuration guidelines ·····································································································································216
Configuring ARP······················································································································································ 217
Overview·······································································································································································217
ARP message format ···········································································································································217
ARP operation······················································································································································217
ARP table······························································································································································218
Introduction to gratuitous ARP····························································································································219
Configuring ARP entries ··············································································································································219
Displaying ARP entries········································································································································219
Creating a static ARP entry ································································································································220
Removing ARP entries ··················································································································································221
Configuring gratuitous ARP·········································································································································221
Static ARP configuration example ······························································································································222
Network Requirements········································································································································222
Configuring Switch A··········································································································································222
Configuring ARP attack defense ···························································································································· 226
Overview·······································································································································································226
User validity check ··············································································································································226
ARP packet validity check ··································································································································226
Configuring ARP detection··········································································································································226
Configuring IGMP snooping ·································································································································· 228
Overview·······································································································································································228
Basic concepts in IGMP snooping·····················································································································228
How IGMP snooping operates ··························································································································230
Protocols and standards ·····································································································································231
Recommended configuration procedure····················································································································231
Enabling IGMP snooping globally ····················································································································232
Configuring IGMP snooping in a VLAN ···········································································································233
Configuring IGMP snooping on a port ·············································································································234
Displaying IGMP snooping multicast table entries ··························································································236
IGMP snooping configuration example·····················································································································237
Configuring MLD snooping ···································································································································· 242
Overview·······································································································································································242
Basic concepts in MLD snooping·······················································································································242
How MLD snooping operates ····························································································································244
Protocols and standards ·····································································································································245
Recommended configuration procedure····················································································································245
Enabling MLD snooping globally ······················································································································246
Configuring MLD snooping in a VLAN ·············································································································247
Configuring MLD snooping on a port ···············································································································248
Displaying MLD snooping multicast table entries ····························································································250
MLD snooping configuration example·······················································································································251
Configuring IPv4 and IPv6 routing ························································································································ 256
Overview·······································································································································································256
Routing table························································································································································256
Static route ···························································································································································256
Default route·························································································································································257
Displaying the IPv4 active route table ·······················································································································257
Creating an IPv4 static route·······································································································································258
Displaying the IPv6 active route table ·······················································································································259
Creating an IPv6 static route·······································································································································260
vii
IPv4 Static route configuration example ····················································································································261
IPv6 static route configuration example·····················································································································265
Configuration guidelines ·············································································································································269
DHCP overview ······················································································································································· 270
Introduction to DHCP ···················································································································································270
DHCP address allocation ············································································································································270
Allocation mechanisms ·······································································································································270
Dynamic IP address allocation process·············································································································271
IP address lease extension··································································································································271
DHCP message format·················································································································································272
DHCP options ·······························································································································································273
DHCP options overview······································································································································273
Introduction to DHCP options·····························································································································273
Introduction to Option 82···································································································································273
Protocols and standards ··············································································································································274
Configuring DHCP relay agent ······························································································································ 275
Introduction to DHCP relay agent ······························································································································275
Application environment·····································································································································275
Fundamentals·······················································································································································275
Recommended configuration procedure····················································································································276
Enabling DHCP and configuring advanced parameters for the DHCP relay agent ·············································277
Creating a DHCP server group ··································································································································279
Enabling the DHCP relay agent on an interface ······································································································280
Configuring and displaying clients' IP-to-MAC bindings ·························································································281
DHCP relay agent configuration example·················································································································282
Network requirements·········································································································································282
Configuring Switch A··········································································································································282
Configuring DHCP snooping·································································································································· 285
Overview·······································································································································································285
DHCP snooping functions···································································································································285
Application of trusted ports ································································································································286
DHCP snooping support for Option 82············································································································287
Recommended configuration procedure····················································································································287
Enabling DHCP snooping ···········································································································································288
Configuring DHCP snooping functions on an interface···························································································289
Displaying clients' IP-to-MAC bindings ······················································································································289
DHCP snooping configuration example ····················································································································290
Network requirements·········································································································································290
Configuring Switch B ··········································································································································291
Managing services·················································································································································· 293
Overview·······································································································································································293
Managing services·······················································································································································294
Using diagnostic tools············································································································································· 296
Overview·······································································································································································296
Ping·······································································································································································296
Traceroute ····························································································································································296
Ping operation ······························································································································································297
IPv4 ping operation·············································································································································297
IPv6 ping operation·············································································································································298
Traceroute operation ···················································································································································298
IPv4 traceroute operation ···································································································································299
IPv6 traceroute operation ···································································································································300
viii
Configuring 802.1X ··············································································································································· 302
Overview·······································································································································································302
802.1X architecture ············································································································································302
Access control methods ······································································································································302
Controlled/uncontrolled port and port authorization status ···········································································303
802.1X-related protocols····································································································································303
Packet formats······················································································································································304
EAP over RADIUS ················································································································································305
Initiating 802.1X authentication ························································································································305
802.1X authentication procedures····················································································································306
802.1X timers ······················································································································································310
Using 802.1X authentication with other features ····························································································311
Configuration prerequisites·········································································································································313
Recommended configuration procedure····················································································································313
Configuring 802.1X globally ·····································································································································313
Configuring 802.1X on a port ···································································································································315
Configuration guidelines ····································································································································315
Configuration procedure ····································································································································315
Configuring an 802.1X guest VLAN·················································································································317
Configuring an Auth-Fail VLAN ·························································································································317
Configuration examples ··············································································································································318
802.1X configuration example··························································································································318
ACL assignment configuration example············································································································324
Configuring AAA ···················································································································································· 333
AAA overview ······························································································································································333
Recommended AAA configuration procedure··········································································································334
Configuring an ISP domain·········································································································································335
Configuring authentication methods for the ISP domain ·························································································336
Configuring authorization methods for the ISP domain···························································································337
Configuring accounting methods for the ISP domain·······························································································339
AAA configuration example ·······································································································································340
Configuring portal authentication·························································································································· 345
Overview·······································································································································································345
Extended portal functions ···································································································································345
Portal system components···································································································································345
Portal system using the local portal server········································································································347
Portal authentication modes ·······························································································································348
Portal support for EAP·········································································································································348
Layer 2 portal authentication process ···············································································································349
Layer 3 portal authentication process ···············································································································350
Configuring portal authentication ······························································································································352
Configuration prerequisites ································································································································352
Configuration task list ·········································································································································353
Configuring the Layer 2 portal service··············································································································354
Configuring the Layer 3 portal service··············································································································356
Configuring advanced parameters for portal authentication ·········································································359
Configuring a portal-free rule·····························································································································361
Portal authentication configuration examples ···········································································································362
Configuring direct portal authentication···········································································································362
Configuring cross-subnet portal authentication ································································································367
Configuring RADIUS ··············································································································································· 374
Overview·······································································································································································374
Client/Server model············································································································································374
ix
Security and authentication mechanisms ··········································································································374
Basic RADIUS message exchange process ······································································································375
RADIUS packet format ········································································································································376
Extended RADIUS attributes ·······························································································································378
Protocols and standards ·····································································································································379
Recommended RADIUS configuration procedure·····································································································379
Configuring RADIUS servers ·······································································································································379
Configuring RADIUS communication parameters·····································································································381
RADIUS configuration example ··································································································································383
Configuration guidelines ·············································································································································389
Configuring users and user groups························································································································ 391
Overview·······································································································································································391
Configuring a local user··············································································································································391
Configuring a user group············································································································································393
Configuring PKI ······················································································································································· 395
PKI overview ·································································································································································395
PKI terms·······························································································································································395
PKI architecture····················································································································································395
PKI applications ···················································································································································396
How PKI operates················································································································································397
Configuring PKI ····························································································································································397
Recommended configuration procedure for manual request··········································································397
Recommended configuration procedure for automatic request······································································399
Creating a PKI entity ···········································································································································400
Creating a PKI domain ·······································································································································401
Generating an RSA key pair······························································································································404
Destroying the RSA key pair ······························································································································405
Retrieving and displaying a certificate ·············································································································405
Requesting a local certificate ·····························································································································407
Retrieving and displaying a CRL························································································································408
PKI configuration example ··········································································································································410
Configuration guidelines ·············································································································································414
Configuring authorized IP ······································································································································ 415
Overview·······································································································································································415
Configuring authorized IP ···········································································································································415
Authorized IP configuration example·························································································································416
Configuring port isolation······································································································································· 419
Overview·······································································································································································419
Configuring the isolation group··································································································································419
Port isolation configuration example··························································································································420
Configuring ACLs···················································································································································· 422
ACL overview ·······························································································································································422
ACL categories ····················································································································································422
Match order ·························································································································································422
ACL rule numbering ············································································································································423
Implementing time-based ACL rules···················································································································424
IPv4 fragments filtering with ACLs ·····················································································································424
Recommend ACL configuration procedures ··············································································································424
Configuring a time range ···································································································································425
Adding an IPv4 ACL ···········································································································································426
Configuring a rule for a basic IPv4 ACL···········································································································427
Configuring a rule for an advanced IPv4 ACL·································································································428
x
Configuring a rule for an Ethernet frame header ACL ····················································································431
Adding an IPv6 ACL ···········································································································································433
Configuring a rule for a basic IPv6 ACL···········································································································434
Configuring a rule for an advanced IPv6 ACL·································································································435
Configuration guidelines ·············································································································································438
Configuring QoS····················································································································································· 439
Introduction to QoS······················································································································································439
Networks without QoS guarantee·····················································································································439
QoS requirements of new applications·············································································································439
Congestion: causes, impacts, and countermeasures·······················································································439
End-to-end QoS····················································································································································441
Traffic classification·············································································································································441
Packet precedences·············································································································································442
Queue scheduling ···············································································································································444
Line rate································································································································································446
Priority mapping ··················································································································································447
Introduction to priority mapping tables·············································································································448
Recommended QoS configuration procedures·········································································································449
Adding a class ·····························································································································································451
Configuring classification rules···································································································································452
Adding a traffic behavior············································································································································454
Configuring traffic redirecting for a traffic behavior································································································455
Configuring other actions for a traffic behavior ·······································································································456
Adding a policy ···························································································································································457
Configuring classifier-behavior associations for the policy ·····················································································458
Applying a policy to a port·········································································································································459
Configuring queue scheduling on a port···················································································································459
Configuring line rate on a port···································································································································460
Configuring priority mapping tables··························································································································461
Configuring priority trust mode on a port ·················································································································462
Configuration guidelines ·············································································································································464
ACL and QoS configuration example ··················································································································· 465
Configuring PoE ······················································································································································ 475
Restrictions and prerequisites······································································································································475
Configuring PoE ports··················································································································································475
Configuring non-standard PD detection·····················································································································477
Displaying information about PSE and PoE ports·····································································································478
PoE configuration example ·········································································································································478
Network requirements·········································································································································478
Configuration procedure ····································································································································479
Support and other resources ·································································································································· 481
Contacting HP ······························································································································································481
Subscription service ············································································································································481
Related information······················································································································································481
Documents····························································································································································481
Websites·······························································································································································481
Conventions ··································································································································································482
Index ········································································································································································ 484
1
Overview
The HP 1910 Switch Series can be configured through the command line interface (CLI), Web interface,
and SNMP/MIB. These configuration methods are suitable for different application scenarios.
•The Web interface supports all 1910 Switch Series configurations.
•The CLI provides some configuration commands to facilitate your operation. To perform other
configurations not supported by the CLI, use the Web interface.
2
Configuration through the Web interface
The device provides web-based configuration interfaces for visual device management and
maintenance.
Figure 1 Web-based network management operating environment
Logging in to the Web interface
You can use the following default settings to log in to the web interface through HTTP:
•Username—admin
•Password—None
•IP address of VLAN-interface 1 on the device—Default IP address of the device, depending on the
status of the network where the device resides.
{If the device is not connected to the network, or no DHCP server exists in the subnet where the
device resides, you can get the default IP address of the device on the label on the device, as
shown in Figure 2. The default subnet mask is 255.255.0.0.
Figure 2 Default IP address of the device
{If a DHCP server exists in the subnet where the device resides, the device will dynamically
obtain its default IP address through the DHCP server. You can log in to the device through the
console port, and execute the summary command to view the information about its default IP
address.
<Sysname> summary
Select menu option: Summary
IP Method: DHCP
IP address: 10.153.96.86
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
<Omitted>
Assuming that the default IP address of the device is 169.254.52.86, to log in to the Web interface of the
device from a PC:
1. Connect the GigabitEthernet interface of the device to a PC by using a crossover Ethernet cable.
By default, all interfaces belong to VLAN 1.
2. Configure an IP address for the PC and make sure that the PC and device can reach each other.
3
For example, assign the PC an IP address (for example, 169.254.52.1) within 169.254.0.0/16
(except for the default IP address of the device).
3. Open the browser, and input the login information.
a. Type the IP address http:// 169.254.52.86 in the address bar and press Enter.
The login page of the web interface (see Figure 3) appears.
b. Enter the username admin and the verification code, leave the password blank, and click
Login.
Figure 3 Login page of the Web interface
The PC where you configure the device is not necessarily a Web-based network management terminal.
A Web-based network management terminal is a PC used to log in to the Web interface and is required
to be reachable to the device.
After logging in to the Web interface, you can select Device > Users from the navigation tree, create a
new user, and select Wizard or Network > VLAN interface to configure the IP address of the VLAN
interface acting as the management interface. For more information, see the corresponding
configuration guides of these modules.
If you click the verification code displayed on the Web login page, you can get a new verification code.
Up to five users can concurrently log in to the device through the Web interface.
Logging out of the Web interface
Click Logout in the upper-right corner of the Web interface, as shown in Figure 4 to quit the Web console.
The system does not save the current configuration automatically. Therefore, you are recommended to
save the current configuration before logout.
Introduction to the Web interface
The Web interface is composed of three parts: navigation tree, title area, and body area, as shown
in Figure 4.
4
Figure 4 Web-based configuration interface
(1) Navi
g
ation tree
(2) Body area
(3) Title area
•Navigation tree—Organizes the Web-based NM functions as a navigation tree, where you can
select and configure functions as needed. The result is displayed in the body area.
•Body area—Allows you to configure and display features.
•Title area—On the left, displays the path of the current configuration interface in the navigation
area; on the right, provides the Save button to quickly save the current configuration, the Help button
to display the Web-related help information, and the Logout button to log out of the Web interface.
Web user level
Web user levels, from low to high, are visitor, monitor, configure, and management. A user with a
higher level has all the operating rights of a user with a lower level.
•Visitor—Users of this level can only use the network diagnostic tools ping and Trace Route. They
can neither access the device data nor configure the device.
•Monitor—Users of this level can only access the device data but cannot configure the device.
•Configure—Users of this level can access device data and configure the device, but they cannot
upgrade the host software, add/delete/modify users, or backup/restore configuration files.
•Management—Users of this level can perform any operations to the device.
Introduction to the Web-based NM functions
User level in Table 1 indicates that users of this level or users of a higher level can perform the
corresponding operations.
5
Table 1 Web-based NM function description
Function menu Descri
p
tion
User level
Wizard IP Setup Perform quick configuration of the device. Management
Stack
Setup Display global settings and port settings of a stack. Configure
Configure global parameters and stack ports. Management
Topology
Summary Display the topology summary of a stack. Configure
Device
Summary Display the control panels of stack members. Configure
Summary
System
Information
Display the basic system information, system
resource state, and recent system operation logs. Monitor
Device
Information Display the port information about the device. Monitor
Devi
ce
Basic
System Name Display and configure the system name. Configure
Web Idle
Timeout
Display and configure the idle timeout period for
logged-in users. Configure
Device
Maintenanc
e
Software
Upgrade
Upload upgrade file from local host, and upgrade
the system software. Management
Reboot Reboot the device. Management
Electronic
Label Display the electronic label of the device. Monitor
Diagnostic
Information
Generate diagnostic information file and view or
save the file to local host. Management
System Time
System Time Display and configure the system date and time. Configure
Net Time Display the synchronization status of the system
clock and configure the network time. Monitor
Syslog
Loglist Display and refresh system logs. Monitor
Clear system logs. Configure
Loghost Display and configure the loghost. Configure
Log Setup Display and configure the buffer capacity and
interval for refreshing system logs. Configure
Configurati
on
Backup
Back up the configuration file to be used at the next
startup from the device to the host of the current
user.
Management
Restore
Upload the configuration file to be used at the next
startup from the host of the current user to the
device.
Management
Save Save the current configuration to the configuration
file to be used at the next startup. Configure
Initialize Restore the factory default settings. Configure
File
Manageme
nt
File
Management
Manage files on the device, such as displaying the
file list, downloading a file, uploading a file, and
removing a file.
Management
6
Function menu Descri
p
tion
User level
Port
Manageme
nt
Summary Display port information by features. Monitor
Detail Display feature information by ports. Monitor
Setup Create, modify, delete, and enable/disable a port,
and clear port statistics. Configure
Port
Mirroring
Summary Display the configuration information about a port
mirroring group. Monitor
Create Create a port mirroring group. Configure
Remove Remove a port mirroring group. Configure
Modify Port Configure ports for a mirroring group. Configure
Users
Summary Display the brief information about FTP and Telnet
users. Monitor
Super
Password
Configure a password for a lower-level user to
switch from the current access level to the
management level.
Management
Create Create an FTP or Telnet user. Management
Modify Modify FTP or Telnet user information. Management
Remove Remove an FTP or a Telnet user. Management
Switch To
Management
Switch the current user level to the management
level. Visitor
Loopback Loopback Perform loopback tests on Ethernet interfaces. Configure
VCT VCT Check the status of the cables connected to Ethernet
ports. Configure
Flow
Interval
Port Traffic
Statistics
Display the average rate at which the interface
receives and sends packets within a specified time
interval.
Monitor
Interval
Configuration
Set an interval for collecting traffic statistics on
interfaces. Configure
Storm
Constrain
Storm
Constrain
Display and set the interval for collecting storm
constrain statistics.
Display, create, modify, and remove the port traffic
threshold.
Configure
RMON
Statistics Display, create, modify, and clear RMON
statistics. Configure
History Display, create, modify, and clear RMON history
sampling information. Configure
Alarm Display, create, modify, and clear alarm entries. Configure
Event Display, create, modify, and clear event entries. Configure
Log Display log information about RMON events. Configure
Energy
Saving Energy Saving
Display and configure the energy saving settings of
an interface. Configure
7
Function menu Descri
p
tion
User level
SNMP
Setup
Display and refresh SNMP configuration and
statistics information. Monitor
Configure SNMP. Configure
Community Display SNMP community information. Monitor
Create, modify, and delete an SNMP community. Configure
Group Display SNMP group information. Monitor
Create, modify, and delete an SNMP group. Configure
User Display SNMP user information. Monitor
Create, modify, and delete an SNMP user. Configure
Trap
Display the status of the SNMP trap function and
information about target hosts. Monitor
Enable or disable the SNMP trap function; create,
modify, and delete a target host. Configure
View Display SNMP view information. Monitor
Create, modify, and delete an SNMP view. Configure
Interface
Statistics
Interface
Statistics
Display and clear the statistics information about
an interface. Configure
Net
work
VLAN
Select VLAN Select a VLAN range. Monitor
Create Create VLANs. Configure
Port Detail Display the VLAN-related details of a port. Monitor
Detail Display the member port information about a
VLAN. Monitor
Modify VLAN Modify the description and member ports of a
VLAN. Configure
Modify Port Change the VLAN to which a port belongs. Configure
Remove Remove VLANs. Configure
VLAN
Interface
Summary Display information about VLAN interfaces by
address type. Monitor
Create Create VLAN interfaces and configure IP addresses
for them. Configure
Modify Modify the IP addresses and status of VLAN
interfaces. Configure
Remove Remove VLAN interfaces. Configure
Voice VLAN
Summary Display voice VLAN information globally or on a
port. Monitor
Setup Configure the global voice VLAN. Configure
Port Setup Configure a voice VLAN on a port. Configure
OUI Summary
Display the addresses of the OUIs that can be
identified by voice VLAN. Monitor
8
Function menu Descri
p
tion
User level
OUI Add Add the address of an OUI that can be identified
by voice VLAN. Configure
OUI Remove Remove the address of an OUI that can be
identified by voice VLAN. Configure
MAC MAC Display MAC address information. Monitor
Create and remove MAC addresses. Configure
Setup Display and configure MAC address aging time. Configure
MSTP
Region Display information about MST regions. Monitor
Modify MST regions. Configure
Global Set global MSTP parameters. Configure
Port Summary Display the MSTP information about ports. Monitor
Port Setup Set MSTP parameters on ports. Configure
Link
Aggregatio
n
Summary Display information about link aggregation
groups. Monitor
Create Create link aggregation groups. Configure
Modify Modify link aggregation groups. Configure
Remove Remove link aggregation groups. Configure
LACP Summary Display information about LACP-enabled ports and
their partner ports. Monitor
Setup Set LACP priorities. Configure
LLDP
Port Setup
Display the LLDP configuration information, local
information, neighbor information, statistics
information, and status information about a port.
Monitor
Modify LLDP configuration on a port. Configure
Global Setup Display global LLDP configuration information. Monitor
Configure global LLDP parameters. Configure
Global
Summary Display global LLDP local information and statistics. Monitor
Neighbor
Summary Display global LLDP neighbor information. Monitor
IGMP
Snooping
Basic
Display global IGMP snooping configuration
information or the IGMP snooping configuration
information in a VLAN, and the IGMP snooping
multicast entry information.
Monitor
Configure IGMP snooping globally or in a VLAN. Configure
Advanced
Display the IGMP snooping configuration
information on a port. Monitor
Configure IGMP snooping on a port. Configure
Other manuals for Compaq Presario,Presario 1910
7
Table of contents
Other HP Switch manuals
HP
HP 10504 User manual
HP
HP ProLiant BL p-Class GbE2 Operating manual
HP
HP 316095-B21 - StorageWorks Edge Switch 2/24 Instruction Manual
HP
HP 316095-B21 - StorageWorks Edge Switch 2/24 Instruction Manual
HP
HP StorageWorks 16-EL User manual
HP
HP StorageWorks 2/140 - Director Switch User manual
HP
HP ProCurve 1600M Configuration guide
HP
HP HP 2610 Series User manual
HP
HP 2615 series How to use
HP
HP A7503 User manual
Popular Switch manuals by other brands
Pickering
Pickering LXI 60-102C user manual
Datasheen
Datasheen KvmSwitch! CS08C user manual
IBM
IBM RedBooks SAN24B-5 Installation, service and user guide
D-Link
D-Link DUB-H7 - Hub - USB Quick installation guide
LightwaveRF
LightwaveRF Comfy LW920 Professional Series instruction manual
CAMBRIONIX
CAMBRIONIX TS3-16 user manual
Juniper
Juniper EX2200 Series Hardware guide
Contemporary Controls
Contemporary Controls CTRLink EISK8P-GT installation guide
Blonder tongue
Blonder tongue Clearview HDMI4 quick guide
IP-Ninjar
IP-Ninjar NJR-CTB user manual
Rockwell Automation
Rockwell Automation Allen-Bradley 194U installation instructions
Simon
Simon S82 manual