HP FlexFabric 12900 series Installation manual
HP FlexFabric 12900 Switch Series
Fundamentals
Command Reference
Part number: 5998-6229
Software version: Release 1135
Document version:6W100-20150427
Legal and notice information
© Copyright 2015 Hewlett-Packard Development Company, L.P.
No part of this documentation may be reproduced or transmitted in any form or by any means without
prior written consent of Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing, performance, or
use of this material.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein.
i
Contents
Basic CLI commands ···················································································································································· 1
alias ···········································································································································································1
display | { begin | exclude | include }·················································································································2
display | by-linenum ················································································································································3
display > ···································································································································································4
display >>·································································································································································5
display alias······························································································································································6
display history-command ·········································································································································7
display history-command all····································································································································7
display hotkey···························································································································································8
hotkey ········································································································································································9
quit ·········································································································································································· 10
return······································································································································································· 11
screen-length disable············································································································································· 11
system-view ···························································································································································· 12
Login management commands ·································································································································13
activation-key ························································································································································· 13
authentication-mode ·············································································································································· 14
auto-execute command ········································································································································· 15
command accounting············································································································································ 17
command authorization········································································································································ 18
databits··································································································································································· 18
display line····························································································································································· 19
display telnet client················································································································································ 20
display user-interface ············································································································································ 21
display users ·························································································································································· 23
escape-key······························································································································································ 24
flow-control····························································································································································· 25
free line··································································································································································· 26
free user-interface ·················································································································································· 27
history-command max-size ··································································································································· 28
idle-timeout ····························································································································································· 28
line ·········································································································································································· 29
line class································································································································································· 30
lock·········································································································································································· 31
parity······································································································································································· 32
protocol inbound ··················································································································································· 33
screen-length ·························································································································································· 34
send ········································································································································································ 35
set authentication password································································································································· 36
shell········································································································································································· 37
speed ······································································································································································ 38
stopbits···································································································································································· 38
telnet ······································································································································································· 39
telnet client source ················································································································································· 40
telnet server acl······················································································································································ 41
telnet server dscp··················································································································································· 42
telnet server enable ··············································································································································· 42
ii
terminal type ·························································································································································· 43
user-interface·························································································································································· 44
user-interface class ················································································································································ 45
user-role ·································································································································································· 46
RBAC commands ·······················································································································································48
description······························································································································································ 48
display role ···························································································································································· 48
display role feature ··············································································································································· 50
display role feature-group ···································································································································· 54
feature····································································································································································· 55
interface policy deny ············································································································································ 55
permit interface······················································································································································ 56
permit vlan ····························································································································································· 58
permit vpn-instance ··············································································································································· 59
role·········································································································································································· 61
role default-role enable········································································································································· 62
role feature-group·················································································································································· 62
rule ·········································································································································································· 63
super ······································································································································································· 67
super authentication-mode···································································································································· 68
super default role··················································································································································· 69
super password ····················································································································································· 70
vlan policy deny ···················································································································································· 71
vpn-instance policy deny ······································································································································ 72
FTP commands····························································································································································74
FTP server commands ···················································································································································· 74
display ftp-server···················································································································································· 74
display ftp-user······················································································································································· 74
free ftp user ···························································································································································· 75
free ftp user-ip ························································································································································ 76
ftp server acl ·························································································································································· 76
ftp server dscp ······················································································································································· 77
ftp server enable···················································································································································· 78
ftp timeout······························································································································································· 78
FTP client commands······················································································································································ 79
append ··································································································································································· 79
ascii········································································································································································· 79
binary ····································································································································································· 80
bye ·········································································································································································· 81
cd ············································································································································································ 81
cdup········································································································································································ 82
close········································································································································································ 83
debug ····································································································································································· 83
delete ······································································································································································ 84
dir············································································································································································ 84
disconnect ······························································································································································ 85
display ftp client source ········································································································································ 86
ftp ············································································································································································ 86
ftp client source······················································································································································ 87
get ··········································································································································································· 88
help ········································································································································································· 89
lcd ··········································································································································································· 90
ls·············································································································································································· 91
iii
mkdir······································································································································································· 92
newer······································································································································································ 92
open········································································································································································ 93
passive···································································································································································· 94
put ··········································································································································································· 94
pwd········································································································································································· 95
quit ·········································································································································································· 96
reget········································································································································································ 96
rename···································································································································································· 97
reset ········································································································································································ 98
restart······································································································································································ 98
rhelp········································································································································································ 99
rmdir ·····································································································································································100
rstatus····································································································································································101
status ·····································································································································································103
system ···································································································································································104
user ·······································································································································································104
verbose ·································································································································································105
? ············································································································································································106
TFTP commands······················································································································································· 107
tftp ·········································································································································································107
tftp client source···················································································································································108
tftp-server acl························································································································································109
File system management commands ····················································································································· 111
cd ··········································································································································································111
copy ······································································································································································113
delete ····································································································································································114
dir··········································································································································································116
fdisk·······································································································································································118
file prompt ····························································································································································120
fixdisk····································································································································································120
format····································································································································································121
gunzip···································································································································································121
gzip·······································································································································································122
md5sum ································································································································································123
mkdir·····································································································································································123
more······································································································································································124
mount ····································································································································································126
move ·····································································································································································126
pwd·······································································································································································127
rename··································································································································································127
reset recycle-bin···················································································································································128
rmdir ·····································································································································································129
sha256sum ··························································································································································129
tar create ······························································································································································130
tar extract ·····························································································································································131
tar list ····································································································································································132
umount ··································································································································································132
undelete································································································································································133
Configuration file management commands ·········································································································· 135
backup startup-configuration······························································································································135
configuration encrypt ··········································································································································135
display current-configuration······························································································································136
iv
display current-configuration diff ·······················································································································137
display default-configuration······························································································································139
display diff ···························································································································································139
display saved-configuration ·······························································································································141
display startup ·····················································································································································142
display this ···························································································································································144
reset saved-configuration····································································································································145
restore startup-configuration·······························································································································146
save·······································································································································································147
startup saved-configuration ································································································································150
Software upgrade commands································································································································ 152
boot-loader file·····················································································································································152
boot-loader update··············································································································································154
bootrom backup ··················································································································································155
bootrom restore ···················································································································································156
bootrom update ···················································································································································157
bootrom-update security-check enable··············································································································158
display boot-loader ·············································································································································159
version auto-update enable································································································································160
version check ignore···········································································································································161
ISSU commands ······················································································································································ 163
display install active············································································································································163
display install committed ····································································································································164
display install ipe-info ·········································································································································166
display install package·······································································································································167
display issu rollback-timer···································································································································168
display issu state··················································································································································169
display version comp-matrix·······························································································································170
install activate ······················································································································································172
install add·····························································································································································174
install commit ·······················································································································································174
install deactivate··················································································································································175
issu accept····························································································································································176
issu commit···························································································································································176
issu load ·······························································································································································177
issu rollback ·························································································································································178
issu rollback-timer ················································································································································179
issu run switchover ··············································································································································180
Device management commands ···························································································································· 182
clock datetime······················································································································································182
clock protocol ······················································································································································183
clock summer-time ···············································································································································183
clock timezone·····················································································································································185
command······························································································································································186
copyright-info enable ··········································································································································187
diagnostic start test··············································································································································188
display alarm ·······················································································································································189
display clock ························································································································································190
display copyright·················································································································································191
display cpu-usage················································································································································191
display cpu-usage configuration························································································································193
display cpu-usage history ···································································································································193
display device······················································································································································196
v
display device manuinfo·····································································································································199
display device manuinfo fan······························································································································201
display device manuinfo power ························································································································202
display diagnostic content··································································································································203
display diagnostic-information ···························································································································205
display environment ············································································································································206
display exception filepath ··································································································································208
display fan ···························································································································································208
display memory ···················································································································································209
display memory-threshold···································································································································212
display power······················································································································································213
display scheduler job··········································································································································214
display scheduler logfile·····································································································································214
display scheduler reboot ····································································································································215
display scheduler schedule·································································································································216
display statistic mode··········································································································································217
display system-working-mode·····························································································································217
display transceiver alarm ···································································································································218
display transceiver diagnosis·····························································································································219
display transceiver interface ······························································································································220
display transceiver manuinfo ·····························································································································221
display version·····················································································································································222
display version-update-record ····························································································································222
exception filepath ················································································································································223
header ··································································································································································224
job·········································································································································································225
memory-threshold ················································································································································226
memory-threshold usage ·····································································································································227
monitor cpu-usage enable ··································································································································228
monitor cpu-usage interval ·································································································································229
monitor cpu-usage threshold ······························································································································230
password-recovery enable ·································································································································231
process core·························································································································································232
reboot ···································································································································································233
reset scheduler logfile ·········································································································································235
reset version-update-record ································································································································236
scheduler job ·······················································································································································236
scheduler logfile size···········································································································································237
scheduler reboot at ·············································································································································237
scheduler reboot delay ·······································································································································238
scheduler schedule ··············································································································································239
shutdown-interval·················································································································································240
statistic mode ·······················································································································································241
switch-fabric isolate·············································································································································242
sysname································································································································································243
system-working-mode ··········································································································································244
temperature-limit ··················································································································································245
time at···································································································································································246
time once······························································································································································247
time repeating······················································································································································248
user-role ································································································································································250
Python commands ··················································································································································· 252
python···································································································································································252
python filename ···················································································································································252
vi
Support and other resources ·································································································································· 254
Contacting HP ······························································································································································254
Subscription service ············································································································································254
Related information······················································································································································254
Documents····························································································································································254
Websites·······························································································································································254
Conventions ··································································································································································255
Index ········································································································································································ 257
1
Basic CLI commands
alias
Use alias to configure a command alias.
Use undo alias to remove a command alias.
Syntax
alias alias command
undo alias alias
Default
The system defines a set of command aliases, as listed in Table 1.
Table 1 System-defined command aliases
Alias Command strin
g
access-list acl
end return
erase delete
exit quit
hostname sysname
logging info-center
no undo
show display
write save
Views
System view
Predefined user roles
network-admin
Parameters
alias: Specifies an alias, a case-sensitive string of 1 to 20 characters. An alias cannot be alias or contain
spaces.
command: Specifies a command string. Make sure the command string meets the syntax requirements.
Usage guidelines
You can configure an alias for a command or the starting keywords of commands, and use the alias to
execute the command or commands.
2
For example, if you configure the alias siprt for display ip routing-table, you can enter siprt to execute the
display ip routing-table command. If you configure the alias ship for display ip, you can use ship to
execute all commands starting with display ip:
•Enter ship routing-table to execute the display ip routing-table command.
•Enter ship interface to execute the display ip interface command.
The command string can include up to nine parameters. Each parameter starts with the dollar sign ($)
and a sequence number in the range of 1 to 9. For example, you can configure the alias shinc for the
display ip $1 | include $2 command. Then, to execute the display ip interface | include
GigabitEthernet0/0/1 command, you only need to enter shinc interface GigabitEthernet0/0/1.
Examples
# Configure the alias shiprt for the display ip routing-table command and verify the configuration.
<Sysname> system-view
[Sysname] alias shiprt display ip routing-table
[Sysname] shiprt
Destinations : 12 Routes : 12
Destination/Mask Proto Pre Cost NextHop Interface
0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0
3.3.3.3/32 Static 60 0 192.168.1.62 GE0/0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0
169.254.0.0/24 Direct 0 0 169.254.0.188 GE0/0
169.254.0.0/32 Direct 0 0 169.254.0.188 GE0/0
169.254.0.188/32 Direct 0 0 127.0.0.1 InLoop0
169.254.0.255/32 Direct 0 0 169.254.0.188 GE0/0
192.168.57.0/24 RIP 100 1 192.168.1.62 GE0/0
224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0
224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0
255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0
# Configure the alias shinc for display ip $1 | include $2.
[Sysname] alias shinc display ip $1 | include $2
# Use the alias shinc to display all static routes.
[Sysname] shinc routing-table Static
3.3.3.3/32 Static 60 0 192.168.1.62 GE0/0
# Use the alias shinc to display all RIP routes.
[Sysname] shinc routing-table RIP
192.168.57.0/24 RIP 100 1 192.168.1.62 GE0/0
Related commands
display alias
display | { begin | exclude | include }
Use display | { begin | exclude | include } to filter the output from a display command with a regular
expression.
3
Syntax
display command |{ begin | exclude | include } regular-expression
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available keywords
and arguments, enter display ?.
begin: Displays the first line matching the specified regular expression and all subsequent lines.
exclude: Displays all lines not matching the specified regular expression.
include: Displays all lines matching the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Use the | { begin | exclude | include } regular-expression option with a display command to filter the
command output. For more information about regular expressions, see Fundamentals Configuration
Guide.
Examples
# Display the lines that contain "vlan" in the running configuration.
<Sysname> display current-configuration | include vlan
vlan 1
vlan 999
port access vlan 999
display | by-linenum
Use display | by-linenum to number each output line for a display command.
Syntax
display command |by-linenum
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available keywords
and arguments, enter display ?.
4
Usage guidelines
By numbering each output line from a display command, you can easily identify the lines of interest.
Each line number is displayed as a 5-character string and might be followed by a colon (:) or hyphen (-).
If you specify the | by-linenum option and the | begin regular-expression option for a display command,
a hyphen is displayed for all lines that do not match the regular expression.
Examples
# Display VLAN 999 settings, with each output line identified by a number.
<Sysname> display vlan 999 | by-linenum
1: VLAN ID: 999
2: VLAN type: Static
3: Route interface: Configured
4: IP address: 192.168.2.1
5: Subnet mask: 255.255.255.0
6: Description: For LAN Access
7: Name: VLAN 0999
8: Tagged ports: None
9: Untagged ports:
10: FortyGigE1/0/1
# Display the first line that begins with "user-group" in the running configuration and all of the following
lines.
<Sysname> display current-configuration | by-linenum begin user-group
114: user-group system
115- #
116- return
display >
Use display >to save the output from a display command to a separate file.
Syntax
display command > filename
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available keywords
and arguments, enter display ?.
filename: Specifies the name of the file that is used to save the output, a string of 1 to 63 characters.
Usage guidelines
The display commands show the configuration, statistics, and states of the device. You can use the
display >command to save the output to a file.
5
If the specified file does not exist, the system creates the file and saves the output to the file. If the file
already exists, the system overwrites the file.
Examples
# Save VLAN 1 settings to a separate file named vlan.txt.
<Sysname> display vlan 1 > vlan.txt
# Verify the content of the vlan.txt file.
<Sysname> more vlan.txt
VLAN ID: 1
VLAN type: Static
Route interface: Not configured
Description: VLAN 0001
Name: VLAN 0001
Tagged ports: None
Untagged ports:
FortyGigE1/0/2
display >>
Use display >> to append the output from a display command to the end of a file.
Syntax
display command >> filename
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available keywords
and arguments, enter display ?.
filename: Specifies the name of the file that is used to save the output, a string of 1 to 63 characters.
Usage guidelines
The display commands show the configuration, statistics, and states of the device. You can use display >>
to save the output to a file.
If the specified file does not exist, the system creates the file and saves the output to the file. If the file
already exists, the system appends the output to the end of the file.
Examples
# Append the VLAN 999 settings to the end of the vlan.txt file.
<Sysname> display vlan 999 >> vlan.txt
<Sysname>
# Check the content of the vlan.txt file.
<Sysname> more vlan.txt
VLAN ID: 1
6
VLAN type: Static
Route interface: Not configured
Description: VLAN 0001
Name: VLAN 0001
Tagged ports: None
Untagged ports:
FortyGigE1/0/2
VLAN ID: 999
VLAN type: Static
Route interface: Configured
IP address: 192.168.2.1
Subnet mask: 255.255.255.0
Description: For LAN Access
Name: VLAN 0999
Tagged ports: None
Untagged ports:
FortyGigE1/0/1
display alias
Use display alias to display command aliases.
Syntax
display alias [alias ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
alias: Specifies a command alias. If you do not specify this argument, the command displays all
command aliases.
Examples
# Display all command aliases.
<Sysname> display alias
Index Alias Command key
1 access-list acl
2 end return
3 erase delete
4 exit quit
5 hostname sysname
6 logging info-center
7 no undo
8 shinc display $1 | include $2
9 show display
7
10 sirt display ip routing-table
11 write save
# Display the command alias shinc.
<Sysname> display alias shinc
Alias Command key
shinc display $1 | include $2
Related commands
alias
display history-command
Use display history-command to display all commands that are saved in the command history buffer for
the current CLI session.
Syntax
display history-command
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
The system automatically saves commands you have successfully executed to the command history buffer
for the current CLI session. You can view them and execute them again.
By default, the system can save up to 10 commands in the buffer. You can use the history-command
max-size command to change the buffer size.
Examples
# Display all commands saved in the command history buffer for the current CLI session.
<Sysname> display history-command
system-view
vlan 2
quit
Related commands
history-command max-size
display history-command all
Use display history-command all to display all commands saved in the command history buffer for all
CLI sessions.
Syntax
display history-command all
8
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
The system automatically saves commands successfully executed by users to the command history buffer
for all CLI sessions. Users can view them and execute them again.
Up to 1024 commands can be saved in the command history buffer. When this number is reached, the
system deletes the earliest commands to make room for newly executed commands.
Examples
# Display all commands saved in the command history buffer for all CLI sessions.
<Sysname> display history-command all
Date Time Terminal Ip User
03/16/2013 20:03:33 vty0 192.168.1.26 **
Cmd:dis his all
03/16/2013 20:03:29 vty0 192.168.1.26 **
Cmd:sys
Related commands
display history-command
display hotkey
Use display hotkey to display hotkey information.
Syntax
display hotkey
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display hotkey information.
<Sysname> display hotkey
----------------- Hotkeys -----------------
-Defined command hotkeys-
CTRL_G display current-configuration
CTRL_L display ip routing-table
CTRL_O undo debugging all
-Undefined command hotkeys-
9
CTRL_T NULL
CTRL_U NULL
-System-reserved hotkeys-
CTRL_A Move the cursor to the beginning of the line.
CTRL_B Move the cursor one character to the left.
CTRL_C Stop the current command.
CTRL_D Erase the character at the cursor.
CTRL_E Move the cursor to the end of the line.
CTRL_F Move the cursor one character to the right.
CTRL_H Erase the character to the left of the cursor.
CTRL_K Abort the connection request.
CTRL_N Display the next command in the history buffer.
CTRL_P Display the previous command in the history buffer.
CTRL_R Redisplay the current line.
CTRL_V Paste text from the clipboard.
CTRL_W Delete the word to the left of the cursor.
CTRL_X Delete all characters from the beginning of the line to the cursor.
CTRL_Y Delete all characters from the cursor to the end of the line.
CTRL_Z Return to the User View.
CTRL_] Kill incoming connection or redirect connection.
ESC_B Move the cursor back one word.
ESC_D Delete all characters from the cursor to the end of the word.
ESC_F Move the cursor forward one word.
Related commands
hotkey
hotkey
Use hotkey to assign a command to a configurable hotkey.
Use undo hotkey to restore the default.
Syntax
hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } command
undo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }
Default
•Ctrl_G: display current-configuration (display the running configuration).
•Ctrl_L: display ip routing-table (display the IPv4 routing table information).
•Ctrl_O: undo debugging all (disable all debugging functions).
•Ctrl_T: No command is assigned to this hotkey.
•Ctrl_U: No command is assigned to this hotkey.
Views
System view
10
Predefined user roles
network-admin
Parameters
CTRL_G: Assigns a command to Ctrl+G.
CTRL_L: Assigns a command to Ctrl+L.
CTRL_O: Assigns a command to Ctrl+O.
CTRL_T: Assigns a command to Ctrl+T.
CTRL_U: Assigns a command to Ctrl+U.
command: Specifies the command to be assigned to the hotkey.
Usage guidelines
The system defines some hotkeys and provides five configurable command hotkeys. Pressing a hotkey
executes the command assigned to the hotkey.
To display system-defined and configurable hotkeys, use the display hotkey command.
Examples
# Assign the display tcp status command to the hotkey Ctrl+T.
<Sysname> system-view
[Sysname] hotkey ctrl_t display tcp status
Related commands
display hotkey
quit
Use quit to return to the upper-level view.
Syntax
quit
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Executing this command in user view disconnects you from the device.
Examples
# Return from FortyGigE 1/0/1 interface view to system view and then to user view.
[Sysname-FortyGigE1/0/1] quit
[Sysname] quit
<Sysname>
11
return
Use return to return to user view from any other view.
Syntax
return
Views
Any view except user view
Predefined user roles
network-admin
network-operator
Usage guidelines
Pressing Ctrl+Z has the same effect as the return command.
Examples
# Return to user view from FortyGigE 1/0/1 interface view.
[Sysname-FortyGigE1/0/1] return
<Sysname>
screen-length disable
Use screen-length disable to disable pausing between screens of output for the current session.
Use undo screen-length disable to enable pausing between screens of output for the current session.
Syntax
screen-length disable
undo screen-length disable
Default
The default depends on the configuration of the screen-length command in user line view.
The following are default settings for the screen-length command:
•Pausing between screens of output.
•Displaying up to 24 lines on a screen.
Views
User view
Predefined user roles
network-admin
Usage guidelines
If you disable pausing between screens of output, all output is displayed. The screen is refreshed
continuously until the final screen is displayed.
This command takes effect only for the current session. When you are logged out, the default is restored.
12
Examples
# Disable pausing between screens of output for the current session.
<Sysname> screen-length disable
Related commands
screen-length
system-view
Use system-view to enter system view from user view.
Syntax
system-view
Views
User view
Predefined user roles
network-admin
network-operator
Examples
# Enter system view from user view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]
Other manuals for FlexFabric 12900 series
6
Table of contents
Other HP Switch manuals
HP
HP StorageWorks 2/32 - SAN Switch User manual
HP
HP AE370A - Brocade 4Gb SAN Switch 4/12 User manual
HP
HP Aruba Instant On 1430 Installation instructions
HP
HP ProCurve 2510-24 User manual
HP
HP JE009A User instructions
HP
HP 3235 User manual
HP
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User manual
HP
HP 316095-B21 - StorageWorks Edge Switch 2/24 Instruction Manual
HP
HP ProCurve 1600M Assembly instructions
HP
HP 6127XLG Blade Series User manual
HP
HP ProCurve 8108fl Assembly instructions
HP
HP StorageWorks 2/16 - SAN Switch User manual
HP
HP StorageWorks 1606 - Extension SAN Switch Operating and maintenance manual
HP
HP StoreFabric SN4000B Programming manual
HP
HP J4897A User manual
HP
HP 5120-48G-PoE+ EI User instructions
HP
HP H3C S9500 Quick guide
HP
HP GbE2c User manual
HP
HP 5830AF-48G Series Assembly instructions
HP
HP FlexFabric 5930 Series User manual
Popular Switch manuals by other brands
Belkin
Belkin OmniView F1DE108C user manual
CM Labs
CM Labs Sixtyfour owner's manual
Intermatic
Intermatic ET1700 Series Installation and user instructions
Rose electronics
Rose electronics UltraMatrix AV quick start guide
Siemens
Siemens 5SG7234-1 operating instructions
Dali
Dali OBERON C SOUND HUB COMPACT manual
