HP HP 2610 Series User manual

Models
HP 2610-48 Switch* J9088A
HP 2610-24 Switch* J9085A
HP 2610-24-PoE Switch* J9087A
HP 2610-48-PoE Switch* J9089A
HP 2610-24-PPoE Switch J9086A
* These skus are End-of-Sale, and are no longer available.
Key features
Access layer cost-effective switch
Layer 2 plus static IP routing
Scalable 10/100 connectivity
Gigabit fiber uplinks
Enterprise-class features
Product overview
The HP 2610 Switch Series consists of five switches. The HP 2610-24 and 2610-48 Switches provide 24 and 48 ports of 10/100
connectivity. The HP 2610-24 Switch is a fanless switch with quiet operation, making it ideal for deployments in open spaces. The HP
2610-24-PPoE, 2610-24-PoE, and 2610-48-PoE Switches are IEEE 802.3af compliant for Power over Ethernet (PoE) and provide up to
15.4 W for 12, 24, and 48 ports. The 2610-24-PPoE switch has 24 10/100 ports and provides 12 ports of PoE. All series switches
include two 10/100/1000BASE-T ports and two mini-GBIC slots for Gigabit Ethernet uplink connectivity. An optional redundant external
power supply is also available to provide redundancy in the event of a power supply failure. With static routing, robust security and
management features, free lifetime warranty, and free software updates, the HP 2610 Switch Series is a cost-effective solution for
customers who are building converged enterprise edge networks.
Features and Benefits
Quality of Service (QoS)
Class of service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP
port number, source port, and DiffServ
Layer 4 prioritization : enables prioritization based on TCP/UDP port numbers
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to four queues
Connectivity
QuickSpecs
HP 2610 Switch Series
Overview
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 1

IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such
as IP phones, wireless access points, and security cameras
Pre-standard PoE support : detects and provides power to pre-standard PoE devices; see list of supported devices in the
product FAQ at: www.hp.com/networking/support
Gigabit uplink connectivity : two 10/100/1000BASE-T ports and two mini-GBIC ports for connectivity such as Gigabit (SX, LX,
LH, 1000BASE-T) and 100BASE-FX
Auto-MDIX : automatically adjusts for straight-through or crossover cables on all 10/100 ports
Jumbo packet support : supports up to 9216 byte frame size to improve performance of large data transfers
Pre-standard PoE support : detects and provides power to most of Cisco's pre-standard PoE devices; see list of support devices
in product's FAQ on: www.hp.com/networking
Resiliency and high availability
IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking : support up to 24 trunks, each with up to 8 links (ports)
per trunk
IEEE 802.1s Multiple Spanning Tree : provides high link availability in multiple VLAN environments by allowing multiple
spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
Optional redundant power supply : provides uninterrupted power (provided by HP 600 RPS/EPS)
Manageability
RMON, XRMON, and sFlow : provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Uni-Directional Link Detection (UDLD): monitors a link between two switches and blocks the ports on both ends of the link if
the link goes down at any point between the two devices
Command authorization : leverages RADIUS to link a custom list of CLI commands to individual network administrator's login;
also provides an audit trail
Multiple configuration files : allow multiple configuration files to be stored to flash image
Dual flash images : provides independent primary and secondary operating system files for backup while upgrading
Single IP Address Management : single IP address management for a virtual stack of up to 16 switches
Friendly port names : allow assignment of descriptive names to ports
Find-Fix-Inform : finds and fixes common network problems automatically, then informs administrator
Software updates : free downloads from the Web
Troubleshooting : ingress and egress port monitoring enable network problem solving
Layer 2 switching
VLAN support and tagging : supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs
IEEE 802.1v protocol VLANs : isolate select non-IPv4 protocols automatically into their own VLANs
Layer 3 routing
Basic IP routing : enables automatic routing to the connected VLANs and up to 16 static routes, including one default route, in IP
networks
Security
Multiple user authentication methods :
IEEE 802.1X: industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction
with a RADIUS server
Web-based authentication: similar to IEEE 802.1X, it provides a browser-based environment to authenticate clients that
QuickSpecs
HP 2610 Switch Series
Overview
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 2

do not support the IEEE 802.1X supplicant
MAC-based authentication: client is authenticated with the RADIUS server based on the client's MAC address
Authentication flexibility :
Multiple IEEE 802.1X users per port: provides authentication of up to eight IEEE 802.1X users per port; prevents user
"piggybacking" on another user's IEEE 802.1X authentication
Concurrent IEEE 802.1X and Web or MAC authentication schemes per port: switch port will accept any of IEEE 802.1X and
either Web or MAC authentications
Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination
TCP/UDP port number
Identity-driven ACL : enables implementation of a highly granular and flexible access security policy and VLAN assignment
specific to each authenticated network user
Dynamic ARP protection : blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
Port security : allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout : prevents particular configured MAC addresses from connecting to the network
Source-port filtering : allows only specified ports to communicate with each other
RADIUS/TACACS+ : eases switch management security administration by using a password authentication server
Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
Port monitoring for network threats : Provides sampled port traffic using sFlow technology to the HP Network Immunity
Manager application for Network Behavior Anomaly Detection (NBAD) analysis to detect threats and mitigate threats at the port
where the threat originated
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the
switch
Secure File Transfer Protocol (FTP): allows secure file transfer to and from the switch; protects against unwanted file
downloads or unauthorized copying of switch configuration file
Switch management logon security : can require either RADIUS or TACACS+ authentication for secure switch CLI logon
DHCP protection : blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
STP BPDU port protection : blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
STP Root Guard : protects the root bridge from malicious attacks or configuration mistakes
Convergence
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol for easy mapping by network
management applications
LLDP-MED (Media Endpoint Discovery): is a standard extension of LLDP that stores values for parameters such as QoS and VLAN
to automatically configure network devices such as IP phones
IP multicast snooping and data-driven IGMP : automatically prevents flooding of IP multicast traffic
Monitor and diagnostics
Port mirroring : enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Warranty and support
Lifetime warranty : for as long as you own the product with advance replacement and next-business-day delivery (available in
most countries)†
Electronic and telephone support : limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is available
Software releases : refer to: www.hp.com/networking/warranty for details on the software releases provided and the period
during which software releases are available for your product(s)
QuickSpecs
HP 2610 Switch Series
Overview
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 3

† Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in most
countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl Module, HP
Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP MSM765 zl Mobility Controller.
For details, refer to the HP Software License, Warranty, and Support booklet at: www.hp.com/networking/warranty .
QuickSpecs
HP 2610 Switch Series
Overview
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 4

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
HP E2615-8-PoE Switch J9565A
8 autosensing 10/100 ports
2 dual-personality ports RJ-45 10/100/1000 port ; or an SFP slot
1 - J9701A -
1U - Height
See Configuration
Note:1, 2
HP 2610-24-PPoE Switch J9086A
24 autosensing 10/100 ports
2 dual-personality ports RJ-45 10/100/1000 port ; or an SFP slot
2 open mini-GBIC (SFP) slots
1U - Height
See Configuration
Note:1, 2
Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
HP X122 1G SFP LC BX-D Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X121 1G SFP LC LH Transceiver J4860C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143A
HP X111 100M SFP LC FX Transceiver J9054C
Note 2 Localization required. (See Localization Menu for list.)
CTO Models
HP 2610-24-PPoE Switch J9086A
24 autosensing 10/100 ports
2 dual-personality ports RJ-45 10/100/1000 port ; or an SFP slot
2 open mini-GBIC (SFP) slots
1U - Height
See Configuration
Note:1, 2
Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
QuickSpecs
HP 2610 Switch Series
Configuration
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 5

HP X122 1G SFP LC BX-D Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X121 1G SFP LC LH Transceiver J4860C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143A
HP X111 100M SFP LC FX Transceiver J9054C
Note 2 If this switch is factory installed in HP Universal Racks, Then the J9583A orJ9583A#0D1 is required.
AMS then J9583A#0D1 is required.
EMEA then J9583A is required.
APD, Japan and China then J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions.
Internal Power Supplies
No Power supplies
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
Cables
QuickSpecs
HP 2610 Switch Series
Configuration
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 6

Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable AJ833A
HP 1m Multi-mode OM3 LC/LC FC Cable AJ834A
HP 2 m Multimode OM3 LC/LC FC Cable AJ835A
HP 5 m Multimode OM3 LC/LC FC Cable AJ836A
HP 15 m Multimode OM3 LC/LC FC Cable AJ837A
HP 30 m Multimode OM3 LC/LC FC Cable AJ838A
HP 50 m Multimode OM3 LC/LC FC Cable AJ839A
HP Premier Flex LC/LC OM4 2f 1m Cbl QK732A
HP Premier Flex LC/LC OM4 2f 2m Cbl QK733A
HP Premier Flex LC/LC OM4 2f 5m Cbl QK734A
HP Premier Flex LC/LC OM4 2f 15m Cbl QK735A
HP Premier Flex LC/LC OM4 2f 30m Cbl QK736A
HP Premier Flex LC/LC OM4 2f 50m Cbl QK737A
Switch Enclosure Options
Rack Mount Kit
HP X410 1U Univ 4-post Rack Mnt Kit J9583A
See Configuration
Note:1, 2
Cofiguration Rules:
Note 1 If this Mounting Kit is order with #0D1 then it integrates to the HP Rack. (not the switch)
Note 2 If the J9583A is ordered in EMEA fire the following UNBUILDABLE error:
"The J9583A cannot be ordered with option integrated to the Rack in the EMEA region. The Rack Mount kit must be
ordered as BTO using supplier 8OCZ."
External Redundant Power Supplies
QuickSpecs
HP 2610 Switch Series
Configuration
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 7

HP 600 Redundant and Extrnl Power Supply J8168A
Height = 1U See Configuration
Note:1
Cofiguration Rules:
Note 1 Localization required. (See Localization Menu for list.)
Option Mounting Kit
HP X510 1U Cable Guard J9700A
See Configuration
Note:1
HP X520 1U Power Adapter Shelf J9701A
See Configuration
Note:1
Software
HP IDM v3 Software w/500-user License J9438A
HP IDM v3 Software w/Unltd-user License J9439A
QuickSpecs
HP 2610 Switch Series
Configuration
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 8

HP 2610-48 Switch
(J9088A)*
Ports 48 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics Dimensions 9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39
cm) (1U height)
Weight 10.75 lb. (4.88 kg), Fully loaded
Memory and processor Processor MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 2 MB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance 100 Mb Latency < 6.2 µs (LIFO)
1000 Mb Latency < 4.4 µs (LIFO)
Throughput up to 13.0 million pps
Routing/Switching
capacity
17.6 Gbps
Routing table size 8000 entries
Environment Operating temperature 32°F to 122°F (0°C to 50°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft. (3 km)
Acoustic Power: 45 dB, Pressure: 36.2 dB; DIN 45635T.19
per ISO 7779
Electrical characteristics Achieved Miercom Certified Green Award
* Products within this series have achieved sufficient scores in each of the
rated criteria to achieve the Miercom Certified Green distinction Award. See
the Specifications section of this series for more information.
Maximum heat
dissipation
285 BTU/hr (300.67 kJ/hr)
Voltage 100-127/200-240 VAC
Current 1.3/0.8 A
Maximum power rating 66 W
Frequency 50/60 Hz
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 9

Notes Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
Safety CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity EN EN 55024, CISPR 24
ESD IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated IEC 61000-4-3; 3V/m
EFT/Burst IEC 61000-4-4; 1.0 kV (power line), 0.5kV (signal
line)
Surge IEC 61000-4-5; 1 kV/2 kV AC
Conducted IEC 61000-4-6; 3V
Power frequency
magnetic field
IEC 61000-4-8; 1A/m,50 or 60 Hz
Voltage dips and
interruptions
IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods
Harmonics EN 61000-3-2, IEC 61000-3-2
Flicker EN 61000-3-3, IEC 61000-3-3
Management HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)
Notes When using mini-GBICs with this product, mini-GBICs with revision "B" or later
(product ends with the letter "B" or later, e.g., J4858B, J4859C) are required.
Services 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR851E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 10

3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
* This sku is End-of-Sale, and is no longer available.
HP 2610-24 Switch
(J9085A)*
Ports 24 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics Dimensions 9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39
cm) (1U height)
Weight 10.21 lb. (4.63 kg), Fully loaded
Memory and processor Processor MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 1 MB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance 100 Mb Latency < 4.1 µs (LIFO)
1000 Mb Latency < 2.9 µs (LIFO)
Throughput up to 9.5 million pps
Routing/Switching
capacity
12.8 Gbps
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 11

Routing table size 8000 entries
Environment Operating temperature 32°F to 122°F (0°C to 50°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft. (3 km)
Acoustic Power: 0 dB, Pressure: 0 dB No Fan
Electrical characteristics Maximum heat
dissipation
142 BTU/hr (149.81 kJ/hr)
Voltage 100-127/200-240 VAC
Current 0.8/0.4 A
Maximum power rating 41 W
Frequency 50/60 Hz
Notes Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
Safety CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity EN EN 55024, CISPR 24
ESD IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated IEC 61000-4-3; 3V/m
EFT/Burst IEC 61000-4-4; 1.0 kV (power line), 0.5kV (signal
line)
Surge IEC 61000-4-5; 1 kV/2 kV AC
Conducted IEC 61000-4-6; 3V
Power frequency
magnetic field
IEC 61000-4-8; 1A/m,50 or 60 Hz
Voltage dips and
interruptions
IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods
Harmonics EN 61000-3-2, IEC 61000-3-2
Flicker EN 61000-3-3, IEC 61000-3-3
Management HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)
Notes When using mini-GBICs with this product, mini-GBICs with revision "B" or later
(product ends with the letter "B" or later, e.g., J4858B, J4859C) are required.
Services 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 12

3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR851E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
* This sku is End-of-Sale, and is no longer available.
HP 2610-24-PoE Switch
(J9087A)*
Ports 24 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 13

2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics Dimensions 12.5(d) x 17.4(w) x 1.73(h) in. (31.75 x 44.2 x 4.39
cm) (1U height)
Weight 15.05 lb. (6.83 kg), Fully loaded
Memory and processor Processor MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 1 MB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance 100 Mb Latency < 4.1 µs (LIFO)
1000 Mb Latency < 2.9 µs (LIFO)
Throughput up to 9.5 million pps
Routing/Switching
capacity
12.8 Gbps
Routing table size 8000 entries
Environment Operating temperature 32°F to 122°F (0°C to 50°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft. (3 km)
Acoustic Power: 64 dB, Pressure: 57 dB; DIN 45635T.19 per
ISO 7779
Electrical characteristics Maximum heat
dissipation
410 BTU/hr (432.55 kJ/hr), (switch-only BTU/hr:
410; combined switch + max. PoE devices at 15.4
W: 2281 BTU/hr)
Voltage 100-127/200-240 VAC
Current 7.0/3.5 A
Maximum power rating 77 W
PoE power 406 W
Frequency 50/60 Hz
Notes Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 14

supplemented with the use of a External Power
Supply (EPS).
Power consumption: 77 W without PoE; 527 W
with PoE.
Safety CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity EN EN 55024, CISPR 24
ESD IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated IEC 61000-4-3; 3V/m
EFT/Burst IEC 61000-4-4; 1.0 kV (power line), 0.5kV (signal
line)
Surge IEC 61000-4-5; 1 kV/2 kV AC
Conducted IEC 61000-4-6; 3V
Power frequency
magnetic field
IEC 61000-4-8; 1A/m,50 or 60 Hz
Voltage dips and
interruptions
IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods
Harmonics EN 61000-3-2, IEC 61000-3-2
Flicker EN 61000-3-3, IEC 61000-3-3
Management HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)
Notes When using mini-GBICs with this product, mini-GBICs with revision "B" or later
(product ends with the letter "B" or later, e.g., J4858B, J4859C) are required.
Services 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR851E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 15

1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
* This sku is End-of-Sale, and is no longer available.
HP 2610-48-PoE Switch
(J9089A)*
Ports 48 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics Dimensions 13.5(d) x 17.4(w) x 1.73(h) in. (34.29 x 44.2 x 4.39
cm) (1U height)
Weight 16.7 lb. (7.58 kg), Fully loaded
Memory and processor Processor MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 2 MB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance 100 Mb Latency < 6.2 µs (LIFO)
1000 Mb Latency < 4.4 µs (LIFO)
Throughput up to 13.0 million pps
Routing/Switching
capacity
17.6 Gbps
Routing table size 8000 entries
Environment Operating temperature 32°F to 122°F (0°C to 50°C)
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 16

Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft. (3 km)
Acoustic Power: 63.6 dB, Pressure: 56.6 dB; DIN 45635T.19
per ISO 7779
Electrical characteristics Maximum heat
dissipation
410 BTU/hr (432.55 kJ/hr), (switch-only BTU/hr:
410; combined switch + max. PoE devices at 15.4
W: 2281 BTU/hr)
Voltage 100-127/200-240 VAC
Current 7.0/3.5 A
Maximum power rating 96 W
PoE power 406 W
Frequency 50/60 Hz
Notes Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of a External Power
Supply (EPS).
Power consumption: 96 W without PoE; 590 W
with PoE.
Safety CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity EN EN 55024, CISPR 24
ESD IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated IEC 61000-4-3; 3V/m
EFT/Burst IEC 61000-4-4; 1.0 kV (power line), 0.5kV (signal
line)
Surge IEC 61000-4-5; 1 kV/2 kV AC
Conducted IEC 61000-4-6; 3V
Power frequency
magnetic field
IEC 61000-4-8; 1A/m,50 or 60 Hz
Voltage dips and
interruptions
IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods
Harmonics EN 61000-3-2, IEC 61000-3-2
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 17

Flicker EN 61000-3-3, IEC 61000-3-3
Management HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)
Notes When using mini-GBICs with this product, mini-GBICs with revision "B" or later
(product ends with the letter "B" or later, e.g., J4858B, J4859C) are required.
Services 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR851E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 18

and response times in your area, please contact your local HP sales office.
* This sku is End-of-Sale, and is no longer available.
HP 2610-24-PPoE Switch
(J9086A) (EOL)
Ports 24 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics Dimensions 9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39
cm) (1U height)
Weight 7.5 lb. (3.4 kg)
Memory and processor Processor MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 1 MB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance 100 Mb Latency < 4.1 µs (LIFO)
1000 Mb Latency < 2.9 µs (LIFO)
Throughput up to 9.5 million pps
Routing/Switching
capacity
12.8 Gbps
Routing table size 8000 entries
Environment Operating temperature 32°F to 122°F (0°C to 50°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft. (3 km)
Acoustic Power: 46 dB, Pressure: 38.4 dB; DIN 45635T.19
per ISO 7779
Electrical characteristics Maximum heat
dissipation
181 BTU/hr (190.96 kJ/hr), (switch-only BTU/hr:
181; combined switch + max. PoE devices at 15.4
W: 827 BTU/hr)
Voltage 100-127/200-240 VAC
Current 2.5/1.3 A
Maximum power rating 62 W
PoE power 126 W
Frequency 50/60 Hz
Notes Maximum power rating and maximum heat
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 19

dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of a External Power
Supply (EPS).
Power consumption: 62 W without PoE; 189 W
with PoE.
Safety CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity EN EN 55024, CISPR 24
ESD IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated IEC 61000-4-3; 3V/m
EFT/Burst IEC 61000-4-4; 1.0 kV (power line), 0.5kV (signal
line)
Surge IEC 61000-4-5; 1 kV/2 kV AC
Conducted IEC 61000-4-6; 3V
Power frequency
magnetic field
IEC 61000-4-8; 1A/m,50 or 60 Hz
Voltage dips and
interruptions
IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods
Harmonics EN 61000-3-2, IEC 61000-3-2
Flicker EN 61000-3-3, IEC 61000-3-3
Management HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)
Notes When using mini-GBICs with this product, mini-GBICs with revision "B" or later
(product ends with the letter "B" or later, e.g., J4858B, J4859C) are required.
Services 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR851E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
QuickSpecs
HP 2610 Switch Series
Technical Specifications
DA - 13032 Worldwide — Version 18 — November 11, 2013 Page 20