HP StorageWorks 7110 - Virtual Array User manual

ext_bus 10 0/8/0/0.1.23.42.0 fcparray CLAIMED INTERFACE FCP
Array Interface
target 27 0/8/0/0.1.23.42.0.0 tgt CLAIMED DEVICE
disk 7 0/8/0/0.1.23.42.0.0.0 sdisk CLAIMED DEVICE HP
A6188A /dev/ dsk/c10t0d0 /dev/ rdsk /c10t0d0
disk 8 0/8/0 /0.1.23.42.0.0.1 sdisk CLAIMED DEVICE HP
A6188A /dev/ dsk/c10t0d1 /dev/ rdsk /c10t0d1
LUN (0 -7)
target (0 -15)
BUS (0 -15)
Instance of the card “C” numbers are same as ext_bus instances
Port – third byte of N-Port ID
(1) 42 i in decimal – convert to HEX which i 2a
(2) 2a i the AL_PA
(3) Look up 2a in AL_PA table to find loop ID = 108
Will be 0 if DFA no loop id required
Area – econd byte of N-Port ID
(1) 23 i in decimal – convert to HEX which i 17
(2) Divide the 17 into two nibble or digit , the “7” mean
port 7 on witch
Domain – fir t byte of N-Port ID
(1) Thi i the Switch Domain (do a witchShow to how Domain
(2) Thi will be “0” if no witch
Card Node
Hardware addre of the HBA, al o written on back of erver
FABRIC (SWITCHES)