HP ProCurve 2510-48 User manual

HP 2510 Switch Series
Models
HP 2510-48 Switch J9020A
HP 2510-24 Switch J9019B
Key features
Managed Layer 2 feature set
24 or 48 10/100 ports
Two mini-GBIC slots for fiber connectivity
Quiet fanless design (J9019B)
Industry-leading warranty
Product overview
Designed to provide essential solutions to small and medium businesses, the HP 2510 Switch Series consists of two Layer 2-managed
switches that provide reliable 10/100 connectivity. Building off of the popularity of the HP 2510-24 Switch, a 24-port 10/100 switch
with two dual-personality ports, the 2510 switch series has expanded to include a higher-density HP 2510-48 Switch, with 48 10/100
ports and four Gigabit Ethernet uplinks.
Features and Benefits
Quality of Service (QoS)
IEEE 802.1p prioritization : delivers data to devices based on the priority and type of traffic
Connectivity
10/100 and 10/100/1000 connectivity : provides customers with the choice of selecting the network connectivity speed that
best meets their needs, with a consistent user experience
Gigabit uplinks :
2510-24 and 2510-48 switches: the 2510-24 switch has two dual-personality ports for either 10/100/1000 or mini-GBIC
connectivity; the 2510-48 switch has four Gigabit Ethernet ports, which can all be used concurrently with two
10/100/1000 ports and two open mini-GBIC slots
HP Auto-MDIX : automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 copper ports
Resiliency and high availability
IEEE 802.1s Multiple Spanning Tree : provides high link availability in multiple VLAN environments by allowing multiple
spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP trunking :
2510-24 switch supports up to two 10/100 trunks each with four links/ports plus one Gigabit Ethernet trunk
QuickSpecs
HP 2510 Switch Series
Overview
DA - 12599 North America — Version 18 — November 5, 2013 Page 1

2510-48 switch supports up to 24 trunks with eight links/ports per trunk
Manageability
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): provides automated device discovery protocol for easy mapping by
network management applications
RMON : provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Full-featured console : provides complete control of the switch with a familiar command-line interface (CLI)
Web interface : allows configuration of the switch from any Web browser on the network
Single IP Address Management : provides single IP address management for a virtual stack of up to 16 switches
Find-Fix-Inform : finds and fixes common network problems automatically, then informs administrator
Dual flash images : provides independent primary and secondary operating system files for backup while upgrading
Software updates : free downloads from the Web
Friendly port names : allow assignment of descriptive names to ports
Layer 2 switching
VLAN support and tagging : support up to 64 port-based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging,
providing security between workgroups
GARP VLAN Registration Protocol : allows automatic learning and dynamic assignment of VLANs
Jumbo packet support : supports up to 9216-byte frame size to improve the performance of large data transfers (2510G
models only)
Security
Protected ports : provides increased security by allowing specified ports to be isolated from all other ports on the switch; the
protected port or ports can communicate only with the uplinks or shared resources
Multiple user authentication methods :
IEEE 802.1X: is an industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in
conjunction with a RADIUS server
Web-based authentication: similar to IEEE 802.1X, it provides a browser-based environment to authenticate clients that
do not support the IEEE 802.1X supplicant
MAC-based authentication: client is authenticated with the RADIUS server based on the client's MAC address
Guest VLAN : isolates guest and unauthorized user traffic to a separate VLAN
Port security : allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout : prevents particular configured MAC addresses from connecting to the network
Multiple IEEE 802.1X users per port : provides authentication of up to two IEEE 802.1X users per port; prevents user
"piggybacking" on another user's IEEE 802.1X authentication
STP BPDU port protection : blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
Secure management access : securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
TACACS+ : eases switch management security administration by using a password authentication server
Convergence
IP multicast snooping : automatically prevents flooding of IP multicast traffic
Flexibility
Fanless design : reduces noise and distractions when deployed in open spaces (2510-24 switch only)
Multiple port density and connectivity speed options : provide choice and flexibility with a consistent user experience
QuickSpecs
HP 2510 Switch Series
Overview
DA - 12599 North America — Version 18 — November 5, 2013 Page 2

Warranty and support
Lifetime warranty : for as long as you own the product with advance replacement and next-business-day delivery (available in
most countries) *
Electronic and telephone support : limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is available
Software releases : refer to: www.hp.com/networking/warranty for details on the software releases provided and the period
during which software releases are available for your product(s)
* Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in most
countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl Module, HP
Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP MSM765 zl Mobility Controller.
For details, refer to the HP Software License, Warranty, and Support booklet at: www.hp.com/networking/warranty .
QuickSpecs
HP 2510 Switch Series
Overview
DA - 12599 North America — Version 18 — November 5, 2013 Page 3

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
HP 2510-24 Switch J9019B
24 autosensing 10/100 ports
2 RJ-45 10/100/1000 port or an open mini-GBIC slot
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
HP 2510-48 Switch J9020A
48 autosensing 10/100 ports
2 SFP 100/1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
HP 2510-48G Switch J9280A
44 autosensing 10/100 ports
4 SFP 100/1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
HP X122 1G SFP LC BX-D Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X121 1G SFP LC LH Transceiver J4860C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143A
Note 2 Localization required. (See Localization Menu for list.)
Factory Racked Models
HP 2510-24 Switch J9019B
24 autosensing 10/100 ports
2 RJ-45 10/100/1000 port or an open mini-GBIC slot
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
HP 2510-24 Factory Integrated Switch J9019BZ
QuickSpecs
HP 2510 Switch Series
Configuration
DA - 12599 North America — Version 18 — November 5, 2013 Page 4

See Configuration
Note:1, 2
HP 2510-48 Switch J9020A
48 autosensing 10/100 ports
2 SFP 100/1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
HP 2510-48 Factory Integrated Switch J9020AZ
See Configuration
Note:1, 2
HP 2510-48G Switch J9280A
44 autosensing 10/100 ports
4 SFP 100/1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
HP E2510-48G Rack Shippable Switch J9280AZ
See Configuration
Note:1, 2
Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
HP X122 1G SFP LC BX-D Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X121 1G SFP LC LH Transceiver J4860C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143A
Note 3 If this switch is factory installed in HP Universal Racks, Then the J9583A, J9583A#0D1 or J9583AZ is required.
AMS then J9583AZ is required.
EMEA then J9583A is required.
APD, Japan and China then J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
QuickSpecs
HP 2510 Switch Series
Configuration
DA - 12599 North America — Version 18 — November 5, 2013 Page 5

SFP Transceivers
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
Internal Power Supplies
No Power supplies
Cables
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable AJ833A
HP 1m Multi-mode OM3 LC/LC FC Cable AJ834A
HP 2 m Multimode OM3 LC/LC FC Cable AJ835A
HP 5 m Multimode OM3 LC/LC FC Cable AJ836A
HP 15 m Multimode OM3 LC/LC FC Cable AJ837A
HP 30 m Multimode OM3 LC/LC FC Cable AJ838A
HP 50 m Multimode OM3 LC/LC FC Cable AJ839A
HP Premier Flex LC/LC OM4 2f 1m Cbl QK732A
HP Premier Flex LC/LC OM4 2f 2m Cbl QK733A
HP Premier Flex LC/LC OM4 2f 5m Cbl QK734A
HP Premier Flex LC/LC OM4 2f 15m Cbl QK735A
HP Premier Flex LC/LC OM4 2f 30m Cbl QK736A
HP Premier Flex LC/LC OM4 2f 50m Cbl QK737A
Switch Enclosure Options
Rack Mount Kit
HP X410 1U Univ 4-post Rack Mnt Kit J9583A
See Configuration
Note:1, 2
HP X410 1U Integ Univ 4-post Rck Mnt Kit J9583AZ
QuickSpecs
HP 2510 Switch Series
Configuration
DA - 12599 North America — Version 18 — November 5, 2013 Page 6

See Configuration
Note:1
Cofiguration Rules:
Note 1 If this Mounting Kit is order with #0D1 or Z then it integrates to the HP Universal Rack. (not the switch)
Note 2 If the J9583A is ordered in EMEA fire the following UNBUILDABLE error:
"The J9583A cannot be ordered with option integrated to the Rack in the EMEA region. The Rack Mount kit must be
ordered as BTO using supplier 8OCZ."
QuickSpecs
HP 2510 Switch Series
Configuration
DA - 12599 North America — Version 18 — November 5, 2013 Page 7

HP 2510-48 Switch
(J9020A)
Ports 48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type:
Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
1 RJ-45 serial console port
Physical characteristics Dimensions 9.3(d) x 17.42(w) x 1.73(h) in. (23.62 x 44.25 x
4.39 cm) (1U height)
Weight 6.05 lb. (2.74 kg), Fully loaded
Memory and processor Processor MIPS 32 @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 512 KB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance 100 Mb Latency < 4.9 µs (64-byte packets)
1000 MB latency < 2.9 µs (64-byte packets)
Throughput up to 13 million pps (64-byte packets)
Switching capacity 17.6 Gbps
MAC address table size 8000 entries
Environment Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/ Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/ Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude up to 15,000 ft. (4.6 km)
Acoustic Power: 43.6 dB; DIN 45635T.19 per ISO 7779
Electrical characteristics Maximum heat
dissipation
92 BTU/hr (97 kJ/hr)
Voltage 100-127/200-240 VAC
Current 1.2/0.7 A
Maximum power rating 27 W
Frequency 50/60 Hz
Notes Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
Safety cUL (CSA 22.2 No. 60950); UL 60950-1; IEC 60950; EN 60950
QuickSpecs
HP 2510 Switch Series
Technical Specifications
DA - 12599 North America — Version 18 — November 5, 2013 Page 8

Emissions FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A; IEC/EN 61000-3-2;
IEC/EN 61000-3-3
Immunity Generic EN 55024, CISPR 24
ESD IEC 61000-4-2
Radiated IEC 61000-4-3
EFT/Burst IEC 61000-4-4
Surge IEC 61000-4-5
Conducted IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics EN 61000-3-2, IEC 61000-3-2
Flicker EN 61000-3-3, IEC 61000-3-3
Management HP PCM+; HP PCM; command-line interface; Web browser; out-of-band
management
Notes When using mini-GBICs with this product, mini-GBICs with revision "B" or later
(product number ending with the letter "B" or later, e.g., J4858B, J4859C) are
required.
Services 3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR851E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
QuickSpecs
HP 2510 Switch Series
Technical Specifications
DA - 12599 North America — Version 18 — November 5, 2013 Page 9

5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 2510-24 Switch
(J9019B)
Ports 24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
2 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port or an open mini-GBIC slot (for use with mini-GBIC
transceivers)
Physical characteristics Dimensions 9.3(d) x 17.42(w) x 1.73(h) in. (23.62 x 44.25 x
4.39 cm) (1U height)
Weight 4.89 lb. (2.22 kg), Fully loaded
Memory and processor Processor MIPS 32 @ 264 MHz, 8 MB flash, 64 MB SDRAM;
packet buffer size: 384 KB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance 100 Mb Latency < 4.9 µs (64-byte packets)
1000 MB latency < 2.6 µs (64-byte packets)
Throughput up to 6.5 million pps (64-byte packets)
Switching capcity 8.8 Gbps
MAC address table size 8000 entries
Environment Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/ Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft. (3 km)
Acoustic Power: 0 dB no fan
Electrical characteristics Maximum heat
dissipation
68 BTU/hr (71.74 kJ/hr)
Voltage 100-127/200-240 VAC
Current 0.7/0.4 A
Maximum power rating 20 W
Frequency 50/60 Hz
QuickSpecs
HP 2510 Switch Series
Technical Specifications
DA - 12599 North America — Version 18 — November 5, 2013 Page 10