HP ProCurve 5400zl Series User instructions

HP 5406-48G zl Switch
1 Power and Fault LEDs 6 LED Mode Select button and indicator LEDs
2 Locator LED 7 Console Port
3 Reset and Clear buttons 8 Auxiliary Port
4 Self Test LED 9 Module Link and Mode LEDs
5 Status LEDs for the Fans, Power Supplies, and Switch Modules 10
Switch Modules and slots with Link and Mode LEDs for each
port located on each module
HP 5406-48G zl Switch Rear View
1 Grounding lug mounting holes 3 AC power connector
2 Power and Fault LEDs 4 Slot for installing optional redundant power supply
5 External PoE power connectors
QuickSpecs
HP 5400 zl Switch Series
Overview
DA - 12436 North America — Version 34 — December 9, 2014 Page 1

HP 5412-92G zl Switch
1 Power and Fault LEDs 6 LED Mode Select button and indicator LEDs
2 Locator LED 7 Console Port
3 Reset and Clear buttons 8 Auxiliary Port
4 Self Test LED 9 Module Link and Mode LEDs
5 Status LEDs for the Fans, Power Supplies, and Switch Modules 10
Switch Modules and slots with Link and Mode LEDs for each
port located on each module
HP 5412-92G zl Switch Rear View
1 Grounding lug mounting holes 3 Slot for installing optional redundant power supply
2 Power and Fault LEDs 4 AC power connector
5 External PoE power connectors
QuickSpecs
HP 5400 zl Switch Series
Overview
DA - 12436 North America — Version 34 — December 9, 2014 Page 2

Models
HP 5406 zl Switch with Premium Software J9642A
HP 5412 zl Switch with Premium Software J9643A
HP 5406-44G-PoE+-2XG v2 zl Switch with Premium Software J9533A
HP 5412-92G-PoE+-2XG v2 zl Switch with Premium Software J9532A
HP 5406-44G-PoE+-4G-SFP v2 zl Switch with Premium Software J9539A
HP 5412-92G-PoE+-4G v2 zl Switch with Premium Software J9540A
HP 5406 8p 10GBASE-T 8p 10GbE SFP+ v2 zl Switch with Premium Software J9866A
Key Features
Advanced access layer, distribution, and core
Integrated L2 to L4 intelligent edge feature set
Enterprise-class performance and security
HP AllianceOne integrated
Scalable 10/100/1000 and 10GbE connectivity
Product overview
The HP 5400 zl Switch Series consists of advanced intelligent switches in the HP modular chassis product line, which includes 6-slot
and 12-slot chassis and associated zl modules and bundles. The foundation for the switch series is a purpose-built, programmable
ProVision ASIC that allows the most demanding networking features, such as Quality of Service (QoS) and security, to be implemented
in a scalable yet granular fashion. With 10/100, Gigabit Ethernet, and 10 Gigabit Ethernet interfaces; choice of PoE+ and non-PoE;
integrated Layer 3 features; and HP AllianceOne solutions, the 5400 zl switch series offers excellent investment protection, flexibility,
and scalability, as well as ease of deployment, operation, and maintenance.
Features and Benefits
Software-defined networking
OpenFlow
supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control
(routing decision) paths
Quality of Service (QoS)
Advanced classifier-based QoS
classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority
level and rate limit to selected traffic on a per-port or per-VLAN basis
Layer 4 prioritization
enables prioritization based on TCP/UDP port numbers
Traffic prioritization
allows real-time traffic classification into eight priority levels mapped to eight queues
Bandwidth shaping
Port-based rate limiting
provides per-port ingress-/egress-enforced increased bandwidth
Classifier-based rate limiting
uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port
Guaranteed minimum
QuickSpecs
HP 5400 zl Switch Series
Overview
DA - 12436 North America — Version 34 — December 9, 2014 Page 3

provides per-port, per-queue egress-based reduced bandwidth
Class of Service (CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source
port, and DiffServ
Management
Remote intelligent mirroring
mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl,
5400 zl, or 3500 Switch located anywhere on the network
RMON, XRMON, and sFlow v5
provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network
management applications
Uni-Directional Link Detection (UDLD)
monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional
link into a unidirectional one; this prevents network problems such as loops
Management simplicity
provides common software features and CLI implementation across all HP ProVision-based switches (including the zl and yl
switches)
Command authorization
leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents
activity
Friendly port names
allow assignment of descriptive names to ports
Dual flash images
provide independent primary and secondary operating system files for backup while upgrading
Multiple configuration files
can be stored to the flash image
NEW Comware CLI
Comware-compatible CLI
bridges the experience of Comware CLI users who are using the ProVision software CLI
Display and fundamental Comware CLI commands
are embedded in the switch CLI as native commands; display output formatted as on Comware-based switches;
fundamental commands provide a Comware-familiar initial switch setup
Configuration Comware CLI commands
entered Comware CLI configuration commands elicit CLI help formulating the correct ProVision software CLI command
Connectivity
IEEE 802.3az Energy Efficient Ethernet
lowers power consumption in periods of low link usage (supported on v2 zl 10/100/1000 and 10/100 modules)
IEEE 802.3af Power over Ethernet (PoE)
provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and
security cameras
IEEE 802.3at Power over Ethernet Plus
provides up to 30 W per port to IEEE 802.3 for PoE- and PoE+-powered devices, such as video IP phones, IEEE 802.11n wireless
access points, and advanced pan/zoom/tilt security cameras
Prestandard PoE support
QuickSpecs
HP 5400 zl Switch Series
Overview
DA - 12436 North America — Version 34 — December 9, 2014 Page 4

detects and provides power to prestandard PoE devices; see the list of supported devices in the product FAQ at
www.hp.com/networking
High-density port connectivity
provides up to 12 interface module slots and up to 288 wire-speed 10/100/1000 PoE-enabled ports or 96 10-GbE ports per
system
Jumbo frames
on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery
services
Auto-MDIX
automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
IPv6
IPv6 host
enables switches to be managed in an IPv6 network
Dual stack (IPv4 and IPv6)
transitions from IPv4 to IPv6, supporting connectivity for both
protocols
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface
IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic
IPv6 routing
supports static and OSPFv3 routing protocols
6in4 tunneling
supports encapsulation of IPv6 traffic in IPv4 packets
Performance
High-speed, high-capacity architecture
1 Tbps crossbar switching fabric provides intra-module and inter-module switching with 585.6 million pps throughput on the
purpose-built ProVision ASICs
Selectable queue configurations
allows for increased performance by selecting the number of queues and associated memory buffering that best meet the
requirements of the network applications
Resiliency and high availability
NEW Virtual Router Redundancy Protocol (VRRP)
allows groups of two routers to dynamically back each other up to create highly available routed environments for IPv4 and IPv6
networks
IEEE 802.1s Multiple Spanning Tree Protocol
provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D
Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP
port trunking
support up to 144 trunks, each with up to eight links (ports) per trunk
Distributed trunking
enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect
to two switches using one logical trunk for redundancy and load sharing
Optional redundant power supply (HP 5400 series)
provides uninterrupted power and allows hot-swapping of the redundant power supplies when installed
QuickSpecs
HP 5400 zl Switch Series
Overview
DA - 12436 North America — Version 34 — December 9, 2014 Page 5

Hot-swappable modules (5400 zl series)
permits modules, mini-GBICs, and power supplies in a redundant power supply configuration to be added or swapped without
interrupting the network
Sparing simplicity
HP zl-common accessories (interface modules and power supplies)
Uplink Failure Detection
provides active-standby network path redundancy for servers that are configured for active-standby NIC teaming
NEW SmartLink
provides easy-to-configure link redundancy of active and standby links
Layer 2 switching
VLAN support and tagging
supports the IEEE 802.1Q standard and 2,048 VLANs simultaneously
IEEE 802.1v protocol VLANs
isolate select non-IPv4 protocols automatically into their own VLANs
GARP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
IEEE 802.1ad Q-in-Q
increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed
campus or metro network
MAC-based VLAN
provides granular control and security; uses RADIUS to map a MAC
address/user to specific VLANs (requires v2 modules)
Rapid Per-VLAN Spanning Tree (RPVST+)
allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
HP switch meshing
dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows concurrent
Layer 3 routing with v2 modules
Layer 3 services
User Datagram Protocol (UDP) helper function
allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents
server spoofing for UDP services such as DHCP
Loopback interface address
defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
Route maps
provide more control during route redistribution; allow filtering and altering of route metrics
Layer 3 routing
Static IP routing
provides manually configured routing for both IPv4 and IPv6 networks
Routing Information Protocol (RIP)
provides RIPv1 and RIPv2 routing
OSPF
provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing
Policy-based routing
uses a classifier to select traffic that can be forwarded based on policy set by the network administrator (requires v2 modules)
QuickSpecs
HP 5400 zl Switch Series
Overview
DA - 12436 North America — Version 34 — December 9, 2014 Page 6

Border Gateway Protocol (BGP)
provides IPv4 Border Gateway Protocol routing, which is scalable, robust, and flexible
Security
Access control lists (ACLs)
provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on
per-VLAN or per-port basis
Multiple user authentication methods
IEEE 802.1X users per port
provides authentication of multiple IEEE 802.1X users per port
Web-based authentication
authenticates from a Web browser for clients that do not support IEEE 802.1X supplicant
MAC-based authentication
client is authenticated with the RADIUS server based on the client's MAC address
Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port
switch port accepts up to 32 sessions of IEEE 802.1X, Web, and MAC authentications
Virus throttling
detects traffic patterns typical of worm-type viruses and either throttles or entirely prevents the virus from spreading across the
routed VLANs or bridged interfaces without requiring external appliances
DHCP protection
blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Secure management access
securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
USB Secure Autorun (requires HP PCM+)
deploys, diagnoses, and updates a switch using a USB flash drive; works with a secure credential to prevent tampering
Switch CPU protection
provides automatic protection against malicious network traffic trying to shut down the switch
ICMP throttling
defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic
Identity-driven ACL
enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each
authenticated network user
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
Dynamic IP lockdown
works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing
Dynamic ARP protection
blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
STP Root Guard
protects the root bridge from malicious attacks or configuration mistakes
Detection of malicious attacks
monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks
is detected
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout
prevents particular configured MAC addresses from connecting to the network
Source-port filtering
allows only specified ports to communicate with each other
QuickSpecs
HP 5400 zl Switch Series
Overview
DA - 12436 North America — Version 34 — December 9, 2014 Page 7

RADIUS/TACACS+
eases switch management security administration by using a password authentication server
Secure Shell
encrypts all transmitted data for secure remote CLI access over IP networks
Secure Sockets Layer (SSL)
encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
Secure FTP
allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch
configuration file
Management Interface Wizard
helps secure management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB at the desired level
Switch management logon security
can require either RADIUS or TACACS+ authentication for secure switch CLI logon
Security banner
displays a customized security policy when users log in to the switch
Convergence
IP multicast routing
includes PIM Sparse and Dense modes to route IP multicast traffic
IP multicast snooping (data-driven IGMP)
automatically prevents flooding of IP multicast traffic
LLDP-MED (Media Endpoint Discovery)
is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network
devices such as IP phones
PoE allocations
support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient
energy savings
NEW Auto VLAN configuration for voice
RADIUS VLAN: uses a standard RADIUS attribute and LLDP-MED to automatically configure a VLAN for IP phones
CDPv2: uses CDPv2 to configure legacy IP phones
NEW Local MAC Authentication
assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes
Warranty and support
Lifetime Warranty 2.0
advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†
Electronic and telephone support (for Lifetime Warranty 2.0)
limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone
support is available from HP for the entire warranty period; to reach our support centers, refer to
www.hp.com/networking/contact-support ; for details on the duration of support provided with your product purchase, refer to
www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to www.hp.com/networking/support ; for details on the software releases available with
your product purchase, refer to www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller
and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty. For details, refer to
QuickSpecs
HP 5400 zl Switch Series
Overview
DA - 12436 North America — Version 34 — December 9, 2014 Page 8

the Software license and hardware warranty statements at: www.hp.com/networking/warranty .
QuickSpecs
HP 5400 zl Switch Series
Overview
DA - 12436 North America — Version 34 — December 9, 2014 Page 9

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
HP 5406 zl Switch with Premium Software J9642A
1 Power Supply required
4U - Height
See Configuration
Note:4
HP 5406-44G-PoE+-2XG v2 zl Swch w Pm SW J9533A
44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included (min=0 \ max=2 SFP+
Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height
See Configuration
Note:1, 5, 9
PDU CABLE NA/MEX/TW/JP J9533A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9533A#B2C
C15 PDU Jumper Cord (ROW)C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power CordHigh Volt Switch to Wall Power Cord J9533A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5406 8p10GT 8p10GE Swch and Psw J9866A
8 RJ-45 10GbE ports
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
4U - Height
See Configuration
Note:1, 3, 5, 9
PDU CABLE NA/MEX/TW/JP J9866A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9866A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord J9866A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5406-44G-PoE+-4G v2 zl Swch w Prm SW J9539A
44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port GT PoE+/4-port SFP v2 zl Mod included (min=0 \ max=4 SFP Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height
See Configuration
Note:2, 5, 9
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 10

PDU CABLE NA/MEX/TW/JP J9539A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9539A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord J9539A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5406 8p10GT 8p10GE Swch and Psw J9866A
8 RJ-45 10GbE ports
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
4U - Height
See Configuration
Note:1, 5, 9
PDU CABLE NA/MEX/TW/JP J9866A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9866A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord J9866A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5412 zl Switch with Premium Software J9643A
2 Power Supplies required
7U - Height
See Configuration
Note:4
HP 5412-92G-PoE+-2XG v2 zl Swch w Pm SW J9532A
92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+
Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height
See Configuration
Note:1, 5, 9
PDU CABLE NA/MEX/TW/JP J9532A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9532A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord J9532A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 11

HP 5412-92G-PoE+-4G v2 zl Swch w Prm SW J9540A
92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height
See Configuration
Note:2, 5, 9
PDU CABLE NA/MEX/TW/JP J9540A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9540A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord J9540A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1 The following Transceivers install into this Chassis :
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X132 10G SFP+ LC ER Transceiver J9153A
HP X132 10G SFP+ LC LR Transceiver J9151A
HP X132 10G SFP+ LC LRM Transceiver J9152A
HP X132 10G SFP+ LC SR Transceiver J9150A
HP X242 SFP+ SFP+ 1m Direct Attach Cable J9281B
HP X242 SFP+ SFP+ 3m Direct Attach Cable J9283B
HP X242 SFP+ SFP+ 7m Direct Attach Cable J9285B
HP X244 XFP SFP+ 1m Direct Attach Cable J9300A
HP X244 XFP SFP+ 3m Direct Attach Cable J9301A
HP X244 XFP SFP+ 5m Direct Attach Cable J9302A
HP X242 SFP+ 10m DAC Cable J9286B
HP X242 SFP+ 15m DAC Cable J9287B
Note 2 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 12

HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X111 100M SFP LC FX Transceiver J9054C
Note 4 If Switch is ordered in a Rack, Then #B2B, or #B2C is defaulted on the Power Supply's. (Optional when Switch is not
Racked. See Drop down remark in "Power Supplies" section.)
Note 5 If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in North America, Mexico Taiwan, and Japan)
Note 9 Localization required on orders without #B2B, #B2C, #B2D or #B2E options.
Box Level Integration CTO Models
CTO Solution Sku
HP 54xx CTO Switch Solution J9809A
SSP trigger sku See Configuration
Note:7
CTO Switch Chassis
HP 5406 zl Switch with Premium Software J9642A
1 Power Supply required
4U - Height
See Configuration
Note:4, 10
HP 5406-44G-PoE+-2XG v2 zl Swch w Pm SW J9533A
44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included (min=0 \ max=2 SFP+
Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height
See Configuration
Note:1 , 4, 8, 10,
12
PDU CABLE NA/MEX/TW/JP #B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW #B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord #B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5406-44G-PoE+-4G v2 zl Swch w Prm SW J9539A
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 13

44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port GT PoE+/4-port SFP v2 zl Mod included (min=0 \ max=4 SFP Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height
See Configuration
Note: 2, 4, 8, 10,
12
PDU CABLE NA/MEX/TW/JP #B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW #B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord #B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5406 8p10GT 8p10GE Swch and Psw J9866A
8 RJ-45 10GbE ports
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
4U - Height
See Configuration
Note:1, 4, 8, 10,
12
PDU CABLE NA/MEX/TW/JP J9866A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9866A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord J9866A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5412 zl Switch with Premium Software J9643A
2 Power Supplies required
7U - Height
See Configuration
Note:4
HP 5412-92G-PoE+-2XG v2 zl Swch w Pm SW J9532A
92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+
Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height
See Configuration
Note:1, 4, 8, 10,
12
PDU CABLE NA/MEX/TW/JP #B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW #B2C
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 14

C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord #B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5412-92G-PoE+-4G v2 zl Swch w Prm SW J9540A
92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height
See Configuration
Note:2, 4, 8, 10,
12
PDU CABLE NA/MEX/TW/JP #B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW #B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord #B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1 The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X132 10G SFP+ LC ER Transceiver J9153A
HP X132 10G SFP+ LC LR Transceiver J9151A
HP X132 10G SFP+ LC LRM Transceiver J9152A
HP X132 10G SFP+ LC SR Transceiver J9150A
HP X242 SFP+ SFP+ 1m Direct Attach Cable J9281B
HP X242 SFP+ SFP+ 3m Direct Attach Cable J9283B
HP X242 SFP+ SFP+ 7m Direct Attach Cable J9285B
HP X244 XFP SFP+ 1m Direct Attach Cable J9300A
HP X244 XFP SFP+ 3m Direct Attach Cable J9301A
HP X244 XFP SFP+ 5m Direct Attach Cable J9302A
HP X242 SFP+ 10m DAC Cable J9286B
HP X242 SFP+ 15m DAC Cable J9287B
Note 2 The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 15

HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X111 100M SFP LC FX Transceiver J9054C
Note 4 Localization required on orders without #B2B, #B2C, #B2D or #B2E options.
Note 8 If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in North America, Mexico Taiwan, and Japan)
Note 10 If the Switch Chassis is to be Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and
integrated to the J9809A - HP 5400 CTO Enablement. (Min 1/Max 1 Switch per SSP)
Note 12 If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and integrated to CTO
chassis. See Menu below, option must have a #0D1 to be integrated to the CTO Chassis.
Rack Level Integration CTO Models
CTO Switch Chassis
HP 5406 zl Switch with Premium Software J9642A
1 Power Supply required
4U - Height
See Configuration
Note:11
HP 5406-44G-PoE+-2XG v2 zl Swch w Pm SW J9533A
44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included (min=0 \ max=2 SFP+
ransceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height
See Configuration
Note:1, 4, 11
PDU CABLE NA/MEX/TW/JP #B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW #B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord #B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5406-44G-PoE+-4G v2 zl Swch w Prm SW J9539A
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 16

44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port GT PoE+/4-port SFP v2 zl Mod included (min=0 \ max=4 SFP Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height
See Configuration
Note:2, 4, 11
PDU CABLE NA/MEX/TW/JP #B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW #B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord #B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5406 8p10GT 8p10GE Swch and Psw J9866A
8 RJ-45 10GbE ports
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
4U - Height
See Configuration
Note:1, 4, 11
PDU CABLE NA/MEX/TW/JP J9866A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9866A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord J9866A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5412 zl Switch with Premium Software J9643A
2 Power Supplies required
7U - Height
See Configuration
Note:11
HP 5412-92G-PoE+-2XG v2 zl Swch w Pm SW J9532A
92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+
Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height
See Configuration
Note:1, 4, 11
PDU CABLE NA/MEX/TW/JP #B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW #B2C
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 17

C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord #B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 5412-92G-PoE+-4G v2 zl Swch w Prm SW J9540A
92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height
See Configuration
Note:2, 4, 5, 8
PDU CABLE NA/MEX/TW/JP #B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW #B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord #B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1 The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X132 10G SFP+ LC ER Transceiver J9153A
HP X132 10G SFP+ LC LR Transceiver J9151A
HP X132 10G SFP+ LC LRM Transceiver J9152A
HP X132 10G SFP+ LC SR Transceiver J9150A
HP X242 SFP+ SFP+ 1m Direct Attach Cable J9281B
HP X242 SFP+ SFP+ 3m Direct Attach Cable J9283B
HP X242 SFP+ SFP+ 7m Direct Attach Cable J9285B
HP X244 XFP SFP+ 1m Direct Attach Cable J9300A
HP X244 XFP SFP+ 3m Direct Attach Cable J9301A
HP X244 XFP SFP+ 5m Direct Attach Cable J9302A
HP X242 SFP+ 10m DAC Cable J9286B
HP X242 SFP+ 15m DAC Cable J9287B
Note 2 The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 18

HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X111 100M SFP LC FX Transceiver J9054C
Note 4 Localization required on orders without #B2B, #B2C, #B2D or #B2E options.
Note 6 If the CTO Base Model is ordered #0D1, Then #B2B, or #B2C is Required on the Power Supply's. (Optional when
Switch is not Factory Racked. See Drop down remark in "Power Supplies" section.)
Note 11 If the CTO Switch Chassis needs to be racked, Then the CTO Base Model needs to integrate (with #0D1) to the HP
Rack.
Internal Power Supplies
J9642Ax System (std 0 // max 2) User Selection (min 1 / max 2)
J9533Ax, J9866A and J9539Ax System (std 1 // max 2) User Selection (min 0 / max 1)
J9643Ax System (std 0 // max 4) User Selection (min 2 / max 4)
J9532Ax and J9540x System (std 2 // max 4) User Selection (min 0 / max 2)
HP 1500 W PoE+ zl Power Supply J9306A
C15 Outlet See Configuration
Note:1, 2, 6
PDU CABLE NA/MEX/TW/JP J9306A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9306A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord J9306A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 875W zl Power Supply J8712A
C15 Outlet See Configuration
Note:1, 2, 5, 6
PDU CABLE NA/MEX/TW/JP J8712A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 19

High Volt Switch to Wall Power Cord J8712A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 1500 W zl Power Supply J8713A
C20 Outlet See Configuration
Note:1, 2, 5, 6
C19 PDU WW J8713A#B2D
C19 to C20 Jumper Cord
High Volt Switch to Wall Power Cord J8713A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules :
Note 1 Power Supplies cannot be mixed for a switch enclosure
Note 2 Localization required on orders without #B2B, #B2C or #B2E options.
Note 5 This power supply is not supported on the J9533Ax, J9539Ax, J9532Ax, J9866A and J9540x switches.
Note 6 If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in NA, Mexico,, Taiwan, and Japan)
Remarks:
"Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico,
Taiwan, and Japan)"
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Modules
J9642x only - System (std 0 // max=6) User Selection (min 0 / max=6) per Chassis
J9643x only - System (std 0 // max=12) User Selection (min 0 / max=12) per Chassis
J9533x, J9539x, J8699x, J9447x, J9866A only - System (std 2 // max=6) User Selection (min 0 / max=4) per Chassis
QuickSpecs
HP 5400 zl Switch Series
Configuration
DA - 12436 North America — Version 34 — December 9, 2014 Page 20