HPG Breakaway X9608001007 User manual

Portable Speaker
Model: X9608001007
User Manual
INSTRUCTION FOR USERAND CARE
Dear Customer.
Thank you for purchasing this product. We kindly ask you to read and save this instruction
manual for future reference. Please read all the instructions before using this speaker.
Accessories:
Please check if all the items below are included in your package:
1*Speaker
2*USB Charging Cable
1*Instruction Manual
Charging:
Plug the charging cable into the speaker and connect to another USB power source,
such as a PC / MAC, etc.
Functions:
TWS
BLUETOOTH
RECHARGEABLE BATTERY
VOLUME +/-
PLAY/PAUSE
PREVIOUS / NEXT TRACK

Connection:
TWS connection (under Bluetooth Mode only):
Power on any two speakers at the same time (same model, same Bluetooth name).
long press the “Previous Track”, after hearing a DINGDONG tone means two
speakers connected successful, then use the external Bluetooth device to search
“Breakaway”and connect to play together.
TWS disconnect: When the phone disconnects the Bluetooth connection, press and
hold the “Previous Track”to disconnect TWS.
Bluetooth Connection:
Long press power to boot mode
The speaker’s blue BT indicator will flash.
Search for “Breakaway”on your cellphone and select it once found. The speaker will
issue a indicating tone after the speaker has successfully connected to the cell phone.
When Bluetooth is not connected, it will automatically shut down after 15 minutes.
Product Overview:

1.Power ON/OFF Switch
Long Press: Power ON/OFF Switch
Bluetooth Mode short press, play/pause.
FM Mode short press, automatic search.
Mode switching: Double-click the play button to switch the function mode.
Double-click twice in double-click for 0.8 seconds
Press once for 0.8 seconds for short press
2.+ Next Track/Volume Up Button
3.- Previous Track/Volume Down Button
4.Charging Port / LED Indicator
5.Speaker
Specification
Bluetooth version: V5.0
Power output: 2x5W
Input: DC 5V,1A
Driver: 2x52mm speaker
Battery capacity: 2 x 3.7V/1500mAh
Transmission Distance: 10M
Dimension: 220*80*80mm
IMPORTANT SAFEGUARDS:
1. Do not allow water to spill onto the surface or into the product.
2. This unit is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge unless they are
supervised or given instruction concerning the use of the appliance by a person
responsible for their safety.
3. Children should be supervised to ensure they do not play with the unit.
4. If the product surface is damaged or if there is a mechanical or electrical malfunction,
do not use the unit. Contact the authorized service center immediately.
5. Do not shake the unit.
6. Do not place the unit in water.
7. Do not place the product in direct heat. This unit is to be placed in a dry and ventilated
place.
8. Do not place heavy objects on the unit.
9. If the battery is completely flat, connect the USB charging cable to charge the unit.

Please note the unit may not work properly for the first couple of minutes of charging.
FCC NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.