Monster Rockin Roller 2 User manual

1
Rockin Roller 2
User Manual
FOR QUESTIONS OR TECHNICAL SUPPORT
Please call:
1.800.976.0677
Please do not return this product to the store.

2
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ................................................................................................... 3
UNPACKING .................................................................................................................................................. 5
PARTS ............................................................................................................................................................ 5
GETTING STARTED BLUETOOTH CONNECTION (Bluetooth Devices) .......................................... 6
NFC PARING ................................................................................................................................................. 7
CONNECTION USING AUX INPUT ........................................................................................................... 8
FM / USB CHARGING ................................................................................................................................. 8
AUTO STANDBY .......................................................................................................................................... 9
TROUBLESHOOTING ................................................................................................................................. 9
SPECIFICATIONS ....................................................................................................................................... 10
LIMITED WARRANTY .................................................................................................................................11

3
IMPORTANT SAFETY INSTRUCTIONS
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE SCAN BE FULLY INSERTED TO PREV-ENT
BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOIST.
The lightning ash with arrow- head
symbol, within an equilateral triangle
is intended to alert the user to the
presence of insulated “dangerous
voltage” within the product’s enclo-
sure that may be of sufcient mag-
nitude to constitute a risk of electric
shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK DO NOT RE-
MOVE COVER (OR BACK), NO USER
SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (ser-
vicing) instructions in the literature
accompanying the appliance.
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the product is oper-
ated.
2. RETAIN INSTRUCTIONS -The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS - All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. CLEANING - Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol
cleaners. Clean only with a dry cloth.
6. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
7. ACCESSORIES - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The prod-
uct may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of
the product should follow the manufacturer instructions, and should use a mounting accessory recommended
by the manufacturer. A product and cart combination should be moved care-quick stops, excessive force and
uneven surfaces might cause the product and cart combination to overturn.
8. VENTILATION - Slots and openings in the cabinet are provided for ventilation and to ensure reliable opera-
tion of the product and to protect it from overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation, such as a bookcase or rack, unless proper ventilation is
provided or the manufacturer instructions have been adhered to.

4
9. POWER SOURCES - This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local
power company. For products intended to operate from battery power, or other sources, refer to the operating
instructions.
10. GROUNDING OR POLARIZATION - This product may be equipped with a polarized alternating-current
line plug (a plug having one blade wider than the other).This plug will t into the power outlet only one way.
This is a safety feature: If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
11. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, con-
venience receptacles, and the point of exit from the product.
12. NON-USE PERIODS - The power cord of the product should be unplugged from the outlet when left un-
used for long periods of time.
13. Do not use this apparatus near water.
14. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including
ampliers) that produce heat.
15. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as power - supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
16. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order
to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains
socket outlet completely.
17. Battery shall not be exposed to excessive heat such as sunshine, re or the like.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
CAUTION: Use of controls or adjustments or performance of procedures other than those specied may result
in hazardous radiation exposure.
CAUTION: These servicing instructions are for use by qualied service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating instructions unless you
are qualied to do so.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

5
FCC Warning Statement
ponsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found tocomply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged totry tocorrect the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order
to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity tothe antenna
shall not be less than 20cm (8 inches) during normal operation.
Unpacking
Check that you have all of the following items.
If any item is missing, please contact the customer service hotline for assistance. The hotline number is printed
on the cover page of this user manual.
- Monster Rockin’ Roller 2 Unit
- AC Power Cable
- User Manual (with Warranty Statement)
- Quick Start Guide
Part Descriptions
1. Handle
2. Ruggedized Housing
3. Telescoping Roller Handle
4. Battery level indication
5. Power on/Power off key
6. Charging Port
7. AC Outlets
8. In-Line Wheels
9. USB Ports
10. LED Interface
11. Source Select
12. BT pairing key
13. LED lights on/off key
14. LED Lights
15. Radio Preset
16. AUX Input
17. Volume Knob

6
GETTING STARTED
Power Connection
Wall Outlet
Power On/Off Swich
• Power on the mechanical Power Switch
• The Power Green LED will turn On
• The unit will enter into Bluetooth mode,
Bluetooth LED will ash blue.
• Connect the supplied A/C cable to the speaker.
• Plug the A/C cord into the wall outlet.
• Turn Power Switch on.
If the 3.5mm Stereo Audio cable is plugged in during this Power On mode, it will automatically enter into AUX mode.
CHARGING BATTERY
• By connecting AC power, battery will start charging.
• If Red LED indicator is ashing, this means that battery levels
are low and need charging.
• If all Green LED indicators is on, this means the battery level
is full.
• Charge battery about 6 hours before you start using the unit
for the rst time.
BLUETOOTH CONNECTION (Bluetooth Device)
Manual Bluetooth pairing
• Place Speaker and your Bluetooth device so they are no more
than 3 feet apart.
• Press and hold button on Speaker for 2 seconds to enter
into Bluetooth pairing mode. BT Blue LED will ash.
• Make sure Bluetooth function of your Bluetooth device is ON.
• Set your Bluetooth device to search for Bluetooth devices. You will
recognize the unit by its Bluetooth name ‘Monster Rockin’ Roller”

7
• Once selected, your Bluetooth device will indicate as “Connected”
and you will hear conrmation sound from Speaker.
• Bluetooth LED turns solid upon completion of pairing.
• Bluetooth Blue LED Indicator (Flashing to Steady On)
BLUETOOTH, NFC PAIRING
• Turn the speaker on to Bluetooth pairing mode by pressing and holding to enter into Bluetooth pairing
mode.
• Turn the Bluetooth on your NFC Compatible mobile device
• Tap your mobile device onto the NFC logo of the speaker
• Bluetooth Blue LED Indicator turns solid upon pairing

8
CONNECTION USING AUX INPUT
•Plug in the 3.5mm Stereo Audio wire into the Aux-In input, and the unit will enter into
Aux mode and the BTBlue LED Indicator will turn off.
• You can connect any audio device that has 3.5mm audio output jack, and can
playback any audio from this connected device.
• All playback functions (Play, Pause, Next, Previous, Volume Up & Volume Down)
can be controlled from the connected Audio device.
FM/USB CHARGING
EQ Presets
Listening to FM radio
•Press the “Source” button toselect FM source, the radio station
frequency will be displayed on the screen.
•Press and hold ( or ►)tosearch a station with strongest reception
automatically.
Store your favorite six radio stations manually
• Tune tothe desired radio station.
•Press and hold a number key (1-6) to enter programming mode;
the corresponding number blinks on the screen; and the station to save
on the selected preset.
• Repeat above step 1-2 tostore additional stations.
Select a favorite radio station
•Press the “Source” button toselect FM source.
•Press the number 1-6 keys toselect one of your favorite radio stations to listen.
USB Charging
•With the built in USB power bank, connect your USB cable to one of the two
USB power ports. Y
ou can connect an iPhone, iPad, or any Android device.
(USB cable not included)
EQ Presets
When in Bluetooth
or AUX mode easily
customize your
listening experience
by pressing the
preset button
POP
CLASSICAL
DEFAULT
FLAT
JAZZ
ROCK

9
AUTO STANDBY/ WAKE UP
Auto Stand by:
The Power Red LED Signal will turn on and other LED Signals will turn off once the main unit is in Standby
mode.
• Bluetooth: When there is no BT Connection, or there is a BT Connection failure, or if the BT
has been disconnected for 15 Minutes, the set will go to standby mode and the BT LED Signal
will turn off.
• AUX: The main unit will enter standby mode when the main unit is in AUX mode and no AUX cable
has been detected.
• Work Mode: When the main unit is in work mode, pressing and holding the volume knob key for 3
seconds will auto enter the unit to Standby Mode.
“Wake up” from standby mode:
If the main unit is in Standby mode, press and hold the volume knob for 1 second. The main unit will turn on and
return to the latest source mode. The Power Red LED Signal will turn off and the LED Screen will display the
latest source once the main unit is in work mode.
TROUBLESHOOTING
General
No power
• Check that the AC power cord is securely inserted in the unit and the electrical outlet.
• Check the Power On/Off switch is turn to On position.
• If battery is at. Plug in the AC power cord to charge and operate. Keys no response
• Turn the Power On/Off switch to Off, and then On again to reset the unit.
• Unplug the AC power cord and plug it back again. No sound heard
• Make sure the Aux connected device volume is turn to reasonable level.
• Make sure the Bluetooth connected device output the audio thru BT out.
• Make sure the Bluetooth connected device volume is turn to reasonable level.
Bluetooth Operations
Audio quality is poor
• Bluetooth reception is poor. Move the Bluetooth device closer to the Speaker.
Cannot pair to Bluetooth device
• Make sure both Bluetooth device and Speaker is not connected to any other Bluetooth device.
• Make sure the Bluetooth On/Off switch located below Speaker is slide to On position.
• Make sure the Blue LED on the Speaker is fast ashing (Pairing mode).
• Turn Power switch to Off, and then On again. Press and hold BT button for 2 seconds to enter into pairing
mode.

10
SPECIFICATIONS
General
Input Source ...................................................... Bluetooth /FM/Aux
Bluetooth Range ............................................... Bluetooth 10M (33ft)
AUX IN ............................................................... 3.5 mm
Control Buttons................................................... Power, Source, Bluetooth pairing, Volume knob, Previous/Next, LED lighting
on/off key, 6 pcs FM preset key Battery Level indicated LED on/off key
LED Indicator ..................................................... Power/Standby (Red LED x1); Bluetooth (Blue LED x1); Battery level
indicating LED (Red x1,Green LED x3); LED lighting (White LED x2)
Battery ................................................................ Yes
Power Input ........................................................ AC IN 120V/60H z/AC IN 220V/50Hz
Auto Standby ..................................................... When the unit is not being used for over 15 minutes it will automatically enter
Standby mode
Auto Power Off ................................................... Yes
Speaker output wattage ..................................... 80W X1
Speaker Driver size ............................................ 8” (Woofer) + 3” (Full Range)
Speaker Grill Finishing ....................................... Metal speaker grill
Full Range ........................................................... Yes
Max SPL ............................................................. 99dB
THD + Noise ...................................................... <10%
S/N ...................................................................... >75dB
Cabinet Material ................................................. Plastic
Dimension (W x H x D) ...................................... 16.7” x 20.6” x 9.05”
Weight (Kg) .......................................................... 21lbs
Operating Temperature
Operating Temperature Range ......................... 32F to 104F
Operating Humidity Range ................................ 40~90% RH
Storage Temperature Range ............................. -13F to 158F
Key
Power On/Off Key ............................................... Power on: Switch “Power” key to “I”
Power off: Switch “Power” key to “O”
Source Key ......................................................... Press source key to change sourge between “BT”, “Aux In”, or “FM”
Volume Knob ....................................................... 1. Rotate VOLUME knob to increase/decrease volume;
2. Press and hold the volume knob key for 3s and enter standby status
Bluetooth Paring ................................................. 1. Press and hold the Pairing key for 2s to enter to pairing mode.
2. Press and hold the pairing key for 8s to clear any previous Bluetooth paring.
Previous/Next Key ............................................... Auto search radio stations when in FM mode press and hold “Previous/Next” key
in FM Source
Preset 1,2,3,4,5,6 ................................................ Short press - play preset station
Long press - store current station to preset
Battery Level Indicated
LED On/Off key ................................................... Press
Bluetooth
Bluetooth Version ................................................ 3.0 + EDR
Bluetooth Prole .................................................. A2DP, AVRCP
Bluetooth Frequency Brand ............................... 2.4GHz ~ 2.48GHz
Bluetooth Range ................................................. 10m (33ft.)
Connections
3.5mm Aux In ...................................................... Yes
USB Port ............................................................. USB x 2 (5v 1.2A each)
AC in .................................................................... Yes
AC Out ................................................................. Yes x 2 (Passthrough)