Please refer to your cell phone user’s manual for further information. The general
pairing procedures are as follows:
1) Keep your MBSH and phone within 3 feet when pairing;
2) Make the MBSH enter pairing mode (please refer to “How to enter pairing mode”
above);
3) Activate your cell phone’s Bluetooth function and set your cell phone to search for
Bluetooth devices within range, and select “BTH023” from the list of devices
shown;
4) If requested by your cell phone, enter password or PIN No: “0000” (If your cell
phone supports Bluetooth V2.1 or above, password is not required). If prompted
by your cell phone to connect, select “Yes” (this will vary among cell phone
models);
5) After successful paired, choose and connect “BTH023” from the list of devices
shown on cell phone;
6) After successful connecting, blue LED of headset will flashes twice every 4 seconds
Remarks:
If pairing is failed, please turn off the MBSH first and then re-pair according to steps
1～6 mentioned above.
After pairing is successful, the headset and the cell phone will remember each other,
they will no need to re-pair next time. The MBSH can remember 8 paired devices,
when the number of paired devices exceeds 8, the first one will be replaced.
Every time the MBSH is turned on, it will connect to last connected device
automatically. If you want to pair it with other devices, please turn off the Bluetooth
function of last connected devices first and pair the headset with the new device
according to steps 1～6 mentioned above.
3.2.4 Pairing MBSH with any Bluetooth-enabled device (not included)
You can connect the MBSH to any Bluetooth-enabled device that will work as an
AUDIO/MUSIC source to enjoy music wirelessly from any music or audio device. The
pairing steps are as follows:
1) Keep your MBSH and Bluetooth device within 3 feet from each other;
2) Make the MBSH enter pairing mode (Please refer to “How to enter pairing mode”
above);
3) Turn on the Bluetooth device and make it enter pairing mode (please refer to the
Bluetooth device manual for instructions). All Bluetooth-enabled devices will
search for Bluetooth devices automatically and send a pairing request;
4) When the MBSH requests to enter a PIN No., and the Bluetooth device supporting
