Huato logger-S210-AS User manual
Operation manual for Multifunctional data
logger-S210-AS
Contents
1.Introduction..................................................................................................................................1
1.1Features........................................................................................................................1
1.2Structure for S210-AS multifunctional data logger.................................................1
1.3LCD symbols instructions...........................................................................................2
1.4Instructions for function buttons................................................................................2
1.5Instructions for connection terminals........................................................................3
Multifunctional Data Logger
1
1.Introduction
S210-AS multifunctional data logger is designed for long-term signal measurement and recording,
supported by battery or external AC adapter. S210 can measure various signals, such as voltage signal
0-5V (optionally 0-10V); meanwhile, it can record the binary signals. The log interval can be set from 1
second to 18 hours; measurement range can be opted from -999 to 9999 for operators. Quite easy and
convenient to handle and save data even under the interruption of power supply. USB interface allow s
downloading all the data from data logger for analysis anytime.
1.1 Features
●Various inputs: 4-20mA/0-5V/0-10V etc.
●Scope of testing signal and testing value can be deployed according to users’ different
requirements.
●Adopt high sensitive probe, fast response with high accuracy.
●4-20mA input with 2 channels can record 2-channel current signals (4-20mA).
●Patented structure technology, easy to install battery. Wall-mounted, desk-top and portable.
●Operation software together with data logger to ensure the dada recording system and the
forever existence.
1.2 Structure for S210-AS multifunctional data logger
1
2
3
4
5
6
7
8
①LCD display
②Function buttons
③Signal terminals
④External power port for DC 9V
⑤USB interface
⑥Battery back cover and holder
⑦Wall-mounted hole
⑧Strong magnet (optional accessory)
Multifunctional Data Logger
2
1.3 LCD symbols instructions
1
2
3
45
6
7
13
14
8 9 10 11
12
①Alarm symbol for channel 1
②CH1 symbol stands for channel 1
③TIME symbol shows being the date and time status.
④Alarm symbol for channel 2
⑤CH1 symbol stands for channel 2
⑥USB connecting symbol shows being the PC connection status.
⑦Power symbol display shows being the external power support status.
⑧Battery indication
⑨LOG symbol display shows being the recording status.
⑩MENU symbol display shows being the data logger setting status.
⑪MAX symbol display shows being the temperature maximum value checking status.
⑫MIN symbol display shows being the temperature minimum value checking status.
⑬Temperature and humidity values display symbol.
⑭Units’ symbol, self-defined by users.
1.4 Instructions for function buttons
Button: Log function button, press this button to enter the recording status when data
logger is under stand-by and press for long enough 5 seconds back to stand-by status.
Button：Switch button among MAX, MIN and current values.
Button：LCD on/off button when under the normal working status, turn off the LCD display
and no influence to recording.
Button：On/off button, and invalid under the recording status.
Multifunctional Data Logger
3
1.5 Instructions for connection terminals
1.5.1 Two-channel signal inputs and the third channel can count the binary signal.
Feet 1 is current negative output for channel 1
Feet 2 is current input for channel 1
Feet 3 is current negative output for channel 2
Feet 4 is current input for channel 2
Feet 5 is binary negative signal for channel 3
Feet 6 is binary positive signal for channel 3
Feet 7 is for battery voltage output
Feet 8 is for external power voltage output
Sensor2 Power
4-20mA
Sensor1 Power
TTL ≥2V
4-20mA
Table of contents
