Huawei AP007 User manual

AP007 Power Bank
User Guide

1

2
Getting to know your power bank
The Huawei AP007 is a plug-and-play power bank that can be used to charge
your terminal devices. Connect the AP007 to your device using the charging
cable. After your device is fully charged, disconnect the cable, and the AP007
will automatically power off in 6 seconds. This power bank is easy to use and
carry when you're on the go.
Ports, indicators, and button
USB output port: used to charge terminal devices. For example, your
phone.
Micro USB input port: used to charge the power bank.
Indicators: steady on; indicates the remaining power of the power
bank.
Blinking; indicates that the power bank is being charged or that the
power bank has insufficient power while charging a terminal device.
Power button: used to turn on or off the indicators.
Specif ications
Battery: lithium battery
Input: 5 V 2 A
Capacity: 13000 mAh/46.8
Wh(Typical)
Output: 5 V 2 A

Checking the power level
When the power bank is on standby, press the power button to check the
remaining power.
Charging the power bank
Fully charge the power bank before your first use.
Connect the power bank to a power outlet using the charging cable and adapter
(5 V/2 A). If the indicators are blinking, the power bank is being charged. The
power bank is fully charged when the indicators become steady on.

Charging your terminal device
To charge your terminal device (your phone for example) using the power bank,
connect the power bank to your device using the charging cable. When your
device is fully charged, disconnect the charging cable from the power bank. The
power bank will automatically power off in 6 seconds.
To stop charging your terminal device and immediately power off the
power bank, press and hold the power button on the power bank for 6 seconds
or more. To resume charging, remove and then reinsert the charging cable to
the power bank.
Safety information
Keep the device dry. Avoid dusty, damp, and dirty environments. Using
the device in these environments may damage the circuitry.
Do not use the device during thunderstorms to avoid any
lightning-related damage or injury.
Ideal operating temperatures are 0°C to 45°C. Ideal storage
temperatures are –20°C to +45°C. Extreme heat or cold may damage
the device.