Huawei Quidway S6502 Manual

Quidway® S6500 10G Ethernet Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 1
http://datacomm.huawei.com
Quidway® S6500 10G Ethernet Interface Board
Overview
Quidway® S6500 high-end multiservice switch can provide multiple 10G Ethernet
interface boards. The S6500 Salience III and Salience III Plus engines support GE and
XGbus dual bus system structure. This structure is compatible with all new and old service
boards. While protecting the investment of user, it can provide 48 1000M high-density
convergence for each board. The uplink and interconnection scheme of 10G Ethernet
helps implement the user service quickly. Now, the S6500 provides 1-port, 2-port and
4-port 10G Ethernet board, which are LS8M1TGX1C, LS8M1TGX2-XG and
LS8M1TGX4-XG respectively, meeting the 10G network construction requirement.
Main Characteristics
Flexible Configurations and Expandability
On S6502/ S6503/ S6506/ S6506R up to two, three, six and six 10 G interface boards can
be configured. The user selects ports of different port density as required and selects
optical modules according to the transmission distance. Where, 1-port 10 G Ethernet
interface board uses the optical interface module of XENPAK and 2-port and 4-port use
the XFP type, with the corresponding table shown below:

Quidway® S6500 10G Ethernet Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 2
http://datacomm.huawei.com
Table 1 XENPAK optical interface
SFP module Central
wavelength Connector Matching cable Max. transmission distance
10GBASE-SR-XENPAK 850nm Multi-Mode Fiber
26 m (85.3 ft) for the
62.5 µm MMF with
160MHz*km cable;
82 m (269.0 ft) for
the 50 µm MMF with
500MHz*km cable;
300 m (984.3 ft) for
the 50 µm MMF with
2000MHz*km cable
10GBASE-LR-XENPAK 1310nm 10km
10GBASE-ER-XENPAK 1550nm 40km
10GBASE-ZR-XENPAK 1550nm
SC
Single-Mode Fiber
80km
Table 2 XFP optical interface
XFP module Central
wavelength Connector Matching cable Max. transmission distance
10GBase-SR/SW-XFP 850nm 50/125µm
Multi-Mode Fiber
300 m (984.3 ft) for
the 50 µm MMF with
2000MHz*km cable
10GBase-LR/LW-XFP 1310nm 9/125µm
Single-Mode Fiber 10km
10GBase-ER/EW-XFP 40km
10GBase-ZR/ZW-XFP 1550nm
LC
9/125µm
Single-Mode Fiber 80km
Hot Swap Support
The 10G interface board can implement the hot swap function. The user can plug in/out
interface boards as required. It will not affect the service of other interface boards. The
management system can detect and recognize the interface board in real time and
implement auto configuration, thus ensuring that the existing service is available
continually to the best degree. Meanwhile, the optical module can implement hot swap
and plug-and-play. It is convenient.

Quidway® S6500 10G Ethernet Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 3
http://datacomm.huawei.com
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
High Port Density
The S6500 provides 4-port 10 G selection for each board at most, applicable to the
large-sized network construction and operation.
Service Features
Powerful Layer-2 Features
Support STP/RSTP/MSTP and avoid loop redundancy.
Support 802.1q and provide 4KVLAN and VLAN Trunk.
Support the protocol vlan (IP and IPX).
Support IGMP Snooping.
Support 802.1p and 802.1x.
Support GVRP/GMRP.
Provide 802.3x flow control mechanism and semi-duplex back pressure flow control.
Support 802.3ad port aggregation and dynamic aggregation.
Support the lock of port.
Support port auto negotiation.
Support suppressing the broadcast storm.
Abundant Layer-3 Features
Support the protocols IP, TCP, UDP and ICMP.
Support DHCP Relay and make the dynamic configuration of host across network
segment possible.
Support the IPX protocol.
Support dynamic routing protocols such as OSPF, RIP1/2, IS-IS and BGP4.
Support multicast protocols IGMP, PIM-SM and PM-DM.
Support routing between VLANs.

Quidway® S6500 10G Ethernet Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 4
http://datacomm.huawei.com
z
z
z
z
z
z
z
z
z
z
z
z
z
z
Support VRRP.
Support the static route.
Support four equivalent routes.
Support maximum match and packet-by-packet forwarding mode.
Support line-speed forwarding of layer-2 and layer-3 datagrams.
Support multicast forwarding.
Support SuperVLAN.
Support DHCP Server.
Complete DiffServ/QOS
Provide L2/3/4 flow rule filter.
Support IEEE 802.1p (COS priority).
Support standard and extended ACL rule.
Support Diff-Serv/QoS, whose major functions include the traffic policing CAR, priority
label resetting, packet redirection, queue scheduling mechanism, congestion
avoidance mechanism, across-board port mirroring and traffic statistics.
Support eight priority queues/ports.
Support WRR and SP queue scheduling technologies.
Specifications
Running Environment
Temperature 0˚C – 45˚C
Humidity: 10% – 90%, non-condensing
Short-term working condition
Temperature -5˚C – 55˚C
Humidity: 10% – 90%, non-condensing

Quidway® S6500 10G Ethernet Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 5
http://datacomm.huawei.com
Security Standard Compliance
- UL 60950 (certified via UL)
- CAN/CSA-C22.2 NO.60950-1-03
- IEC 60950-1
- Australia AS/NZ TS-001 and 60950
- EN 60950-1
EMC Standard Compliance
- CISPR 22: 2003-04-10 Edition 4 Class A
- EN55022: 1998+ A1: 2000+A2: 2003 Class A
- CFR Title 47, FCC part 15, Subpart B, Class A
- ICES-003, Issue 4, 2004 Class A
- AS/NZS 3548 Class A
- VCCI V-4 （2002）Class A
- EN 55024: 1998, A1:2001, A2:2003
- GB9254-1998