Huawei LSBM1P4G8B0 User manual

Quidway® S8500 POS Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 1
Quidway® S8500 POS Interface Board
Overview
Quidway® S8500 series products are new generation high-end Ethernet switches
developed by Huawei. They support various POS ports and directly interconnect SDH and
WAN routes without depending on the WAN interface provided by other device. They
make the networking more flexibly and save the investment of user. Moreover, the board
has different port densities, including 4-port 155M POS, 4-port 2.5G POS and 1-port 10G
POS. Diversified S8500 board types, flexible configuration and good performance meet
various networking requirements of users.
155M POS interface board (including 8-port GE)
2.5G POS interface board
10G POS interface board
Main Characteristics
Flexible Configurations and Expandability
The POS interface board can work in any service slot of S8500. Up to three, five, eight
and twelve POS interface boards can be configured on S8502/S8505/S8508/S8512
http://datacomm.huawei.com

Quidway® S8500 POS Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 2
http://datacomm.huawei.com
together respectively, implementing high speed service switch. The user selects POS
interface board of different port density as required and selects optical modules according
to the transmission distance.
Table 1 Description of 155M POS interface module
SFP module Central
wavelength Connector Matching cable Max. transmission distance
50/125µm
Multi-Mode Fiber
OC-3/STM-1-SR-MM 62.5/125µm
Multi-Mode Fiber
2km
OC-3/STM-1-IR-1-SM 15km
OC-3/STM-1-LR-1-SM
1310nm
40km
OC-3/STM-1-LR-2-SM 1550nm
LC
9/125µm
Single-Mode Fiber 80km
Table 2 Description of 2.5G POS interface module
SFP module Central
wavelength Connector Matching cable Max. transmission distance
OC-48/STM-16-SR-SM 2km
OC-48/STM-16-IR-1-SM 15km
OC-48/STM-16-LR-1-SM
1310nm
40km
OC-48/STM-16-LR-2-SM 1550nm
LC 9/125µm
Single-Mode Fiber
80km
Table 3 Description of 10G POS interface module
XFP module Central
wavelength Connector Matching cable Max.
transmission
distance
OC-192/STM-64-IR-SM 1310nm 10km
OC-192/STM-64-LR-SM 1550nm LC 9/125µm
Single-Mode Fiber 40km
The POS interface board is connected with other interface boards through the switching
network chip Crossbar in the system. Any port service of the same interface board or
different interface boards can realize non-blocking switch according to it.
Hot Swap Function
All interface boards support the hot swap function. The user can plug in/out interface

Quidway® S8500 POS Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 3
http://datacomm.huawei.com
boards as required. It will not affect the service of other interface boards. The
management system can detect and recognize the interface board in real time and
implement auto configuration, thus ensuring that the existing service is available
continually to the best degree. Meanwhile, the optical module can implement hot swap
and plug-and-play.
Flexible Service Function Configuration
The user can configure the interface board of different densities, interface types and
function features according to different application occasions. The interface board falls
into standard type and enhanced type. While meeting the diversified requirements of user,
it saves the user’s investment to the best degree.
Table 4 POS interface board types
Name Module type Description
LSBM1P4G8B0 Standard 4-port OC-3c(155M) POS-SFP-LC and 8-1000
BASE-X-SFP
LSBM1P4G8CA0 MPLS Enhance S8500 4-port OC-3c (155M) POS SFP and 8-port
1000BASE-X SFP
LSBM1SP4CA0 MPLS Enhance S8500 4-port OC-48c (2.5G) POS Interface Module,
SFP Req.
LSBM1UP1CA0 MPLS Enhance S8500 1-port OC-192c (10G) POS Interface Module,
XFP Req.
Service Features
z
z
z
z
z
z
The interface board can work in any service slot.
The interface board supports the hot swap function.
The optical module supports the hot swap function.
CA-type enhanced board supports 256 K route forwarding table and C-type enhanced
board and B-type standard board support 128 K forwarding table.
Support IP forwarding at line-speed.
Support multicast forwarding.

Quidway® S8500 POS Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 4
http://datacomm.huawei.com
z
z
z
z
z
Support MPLS forwarding.
Support B1, B2 and B3 error statistics.
Support scrambling setting and CRC length setting.
Based on the SONET/SDH industry standard, ensuring the interoperability with other
manufacturers.
Support the standard network protocol PPP:
IETF Network Working Group - RFC1619
IETF Network Working Group - RFC1661
IETF Network Working Group - RFC1570
IETF Network Working Group - RFC1332
Specifications
Dimensions
346.40 mm (length) × 399.15 mm (width) × 40.1 mm (height)
Running Environment
Operation temperature: 0oC – 45oC
Storage temperature: - 40oC – 75oC
Relative humidity: 5% – 95% non-condensing
Fungus resistance: level 0
Operation altitude: - 60 m – 3000 m
Security Standard Compliance
- EN 60950-1 (LVD Directive)
- UL 60950-1, Edition 1, April 1, 2003
- IEC 60950-1

Quidway® S8500 POS Interface Board
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved. 5
http://datacomm.huawei.com
EMC Standard Compliance
- CISPR 22: 2003-04-10 Edition 4 Class A
- EN55022: 1998+ A1: 2000+A2: 2003 Class A
- CFR Title 47, FCC part 15, Subpart B, Class A
- ICES-003, Issue 4, 2004 Class A
- AS/NZS 3548 Class A
- VCCI V-4 （2002）Class A
- EN 55024: 1998, A1:2001, A2:2003