Huawei WIFI AX2 User manual

HUAWEI WiFi AX2
Quick Start Guide
Instrukcja obsługi
Snabbstartsguide
Hurtigstartveiledning
Hurtigstartguide
Pika-aloitusopas
Schnellstartanleitung
Короткий посібник користувача
Ghid de pornire rapidă
Stručná úvodní příručka
WiFi Yönlendirici Hızlı Kullanım Kılavuzu
Kratko uputstvo
Īsa pamācība
Sparčiosios paleisties vadovas
Kiirtutvustus
Краткое руководство пользователя
Упатство за брз почеток
Ръководство за бърз старт
Stručná úvodná príručka
Gyors útmutató
Vodič za brzi početak rada
Vodnik za hiter začetek
Οδηγός γρήγορης έναρξης

Contents
Quick Start Guide........................................................... 1
Instrukcja obsługi................................................................ 13
Snabbstartsguide.................................................................. 27
Hurtigstartveiledning............................................................. 39
Hurtigstartguide..................................................................... 51
Pika-aloitusopas ................................................................... 63
Schnellstartanleitung............................................................ 75
Короткий посібник користувача ....................................... 89
Ghid de pornire rapidă....................................................... 102
Stručná úvodní příručka.................................................... 114
WiFi Yönlendirici Hızlı Kullanım Kılavuzu ....................... 126
Kratko uputstvo................................................................... 142
Īsa pamācība ...................................................................... 154
Sparčiosios paleisties vadovas........................................ 166
Kiirtutvustus......................................................................... 178
Краткое руководство пользователя............................. 190
Упатство за брз почеток ................................................. 206

Ръководство за бърз старт.............................................220
Stručná úvodná príručka....................................................233
Gyors útmutató ...................................................................245
Vodič za brzi početak rada................................................259
Vodnik za hiter začetek .......................................................271
Οδηγός γρήγορης έναρξης ...............................................283

Quick Start Guide
POWER
1 2 3
WPS/RESET
1000M WAN/LAN
1
2
3 4
1
Indicator
2
Power port
3
WAN/LAN auto-adaptation ports: Connect to the Internet (such as optical modem,
broadband modems, etc.) and wired network device such as a computer.
4
WPS/RESET button: provides the functions of both the WPS button and the RESET
button.
1

Step 1: Connecting the cables
Optical/Broadband/cable modem
(from your broadband provider)
POWER
1
2 3
WPS/RESET
1000M WAN/LAN
POWER
RESET
WAN
LAN
Internet
LAN
PON
•Erect the all antennas upright to ensure optimized Wi-Fi®signal.
•If the indicator stays red, this indicates that the router is not connected to the Internet.
Please refer to "Step 2: Configuring the network settings".
•For routers that support WAN/LAN auto-adaptation, the network ports are WAN/
LAN combo ports. Youcan also specify a fixed WAN port on the router's web-based
management page.
2

Step 2: Configuring the network settings
Connect your mobile phone or computer
to the router's Wi-Fi network (no password
required).
Check for the Wi-Fi name on the bottom of
the new router.
1
Open the browser, you will be
automaticallyredirected.
(If the page is not displayed
automatically,enter 192.168.3.1) .
2
Wi-Fi Name: XXXXXX
Let's get started
3
Wi-Fi
Wi-Fi
XXXXXX
Connected

3
Enter your broadband account and password.
If your Internet connection does not require an account and password, please skip to the
nextstep.
•If you have forgotten your broadband account
and password, contact your broadband carrier
to obtain a broadband account and password.
•If you need to configure VLAN on your
network, contact your broadband carrier to
confirm the VLAN parameters, andenable the
VLAN switch on the screen.
4
Internet access wizard
Broadband account
Broadband password
VLAN
Next

4
Set a new Wi-Fi name, Wi-Fi password, and admin password for the new router.
Enable Prioritize 5 GHz: Priority usage of 5 GHz Wi-Fi band over 2.4 GHz band when signal
strength is equal to increase connection speeds.
5
Internet access wizard
Configuration complete.
Internet access wizard
Prioritize 5 GHz
Wi-Fi network name
Wi-Finetwork password
Login password
Confirm password
Next

Manage the router with our mobile app
Scan the QR code to download and install the HUAWEI AI Life App
on your mobile phone or tablet. You can use the app to manage
your router.
Indicator
Steady green
Connected to the network
Not connected to the network
•Loose cable or connect error. Check the cable.
•Broadband network error. Contact your broadband carrier.
Steady red
Flashing
The router has detected a pairable device.
When other HUAWEI devices (support HarmonyOS Connect) , the indicator
on the HUAWEI WiFi AX2 will flash. When this happens, press the HUAWEI
WiFi AX2's WPS/RESET button. The indicator should flash quickly, indicating
that the pairable device is connecting to the HUAWEI WiFi AX2. The
connection process is complete when the indicator stops flashing.
If you touched the WPS/RESET button by accident, wait for 8 seconds till the
indicator returns to normal.
6

Frequently Asked Questions (FAQ)
Q1: What can I do if I encounter any of the following issues when configuring the router?
•If your device did not detect the router's Wi-Fi: Ensure that the router is powered on. Wait for a
moment (till the router is started) and try to search again on your device.
•If you cannot visit the router's configuration page on your device: Ensure that your device is
connected to the router's Wi-Fi network, and then enter 192.168.3.1 in the browser to visit this page
on your device.
•If the page displays "Cable disconnected": Ensure that the router's WAN port is connected to
the modem's LAN port, andthe modem has Internet access. Check that alljoints are securely
connected and in good contact, and the network cables are in good condition.
If the issue persists, restore the router to the factory settings, and follow the guide to reconnect the cables
and configure the router.
Q2: How do I restore the router to its factory settings?
Connect the router to the power supply and wait until the router completes the startup process.
Press the WPS/RESET button on the router for more than two seconds until the indicator light goes
out. Wait for the router to complete the restart process. When the indicator turns red, this indicates
that the router has been restored to its factory settings.
If the router has been factory reset, you need to configure it again.
7

Q3: How do I connect an add-on HUAWEI router to my HUAWEI WiFi AX2's network?
You can connect the router in either of the following ways:
•Wired connection. Connect the WAN port of the add-on router (new or restored to factory settings)
to the LAN port of the configured HUAWEI WiFi AX2 using an Ethernet cable.
•Wireless connection. Step 1: Place the add-on router (new or restored to factory settings) within
one meter of the configured HUAWEI WiFi AX2 and connect it to the power supply. Step 2: When
the indicator on the HUAWEI WiFi AX2 starts to flash, press the WPS/RESET button on it. Wait
until the indicator on the add-on router shows it is connected to the network.
"HUAWEI router" refers to routers that support HarmonyOS Mesh+. Please check if your device
supports such feature.
Q4: How do I connect a Wi-Fi device to my router using WPS?
When your router is powered on, press its WPS/RESET button, and then press the WPS button on
the Wi-Fi device (such as a phone) within two minutes, to initiate standard WPS negotiation and
connect the Wi-Fi device to the router's Wi-Fi network.
Q5: What should I do if I forget my login password for the app or the router's web-based
management page?
Try using the router's Wi-Fi password to login. If the issue persists, restore the router to the factory
settings.
8

Q6: How do I connect my router to the HUAWEI CPE to expand the Wi-Fi network?
You can connect your router in either of the following ways:
•Wired connection
Place your router in a room with weak or no signal strength, then connect the WAN port of your router
to the LAN port of the HUAWEI CPE using an Ethernet cable.
•Wireless connection (using the H button)
Step 1: Place the router within one meter of the HUAWEI CPE and connect the power supply.
within one meter
Step 2: When the indicator on the HUAWEI CPE starts to flash, press the H button on it. Wait until the
indicator on the router shows that the router is connected to the network.
Step 3: Place the router in a room with weak signal strength and connect the power supply.
•The figure is for reference only.
•Ensure that the HUAWEI CPE is connected to the Internet, and the router is new or restored to factory
settings.
•Ensure that the HUAWEI CPE supports the HUAWEI HiLink function and CoAP protocol. Please consult
the distributor for details.
•Ensure that the distance between your router and the HUAWEI CPE is less than 10 meters and there are
no more than one wall in between.
9

Safety information
Operation and safety
•Do not use your device if using the device is prohibited. Do not use the device if doing so causes
danger or interference with other electronic devices.
•Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a
device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker,
hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
•Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments
may result in circuit malfunctions.
•Ideal operating temperatures are 0 °C to 40 °C. Ideal storage temperatures are -40 °C to +70 °C.
Extreme heat or cold may damage your device or accessories.
•Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not
enclose or cover your device with towels or other objects. Do not place the device in a container with
poor heat dissipation, such as a box or bag.
•The device should be installed and operated with a minimum distance of 20 cm between the radiator
and your body.
•Using an unapproved or incompatible power adapter, charger, or battery may damage your device,
shorten its lifespan, or cause a fire, explosion, or other hazards.
•For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily
accessible.
•Unplug the power adapter from electrical outlets and the device when not in use.
•Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits,
malfunctions, or electric shocks.
•The device should be installed at a position no more than 2 m from the ground.
10

Disposal and recycling information
The symbol on the product, battery, literature, or packaging means that the products and batteries
should be taken to separate waste collection points designated by local authorities at the end of
the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves
valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste disposal
service or visit the website https://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and its electrical accessories comply with local applicable rules on the restriction of the use
of certain hazardous substances in electrical and electronic equipment, such as EU REACH regulation,
RoHS and Batteries (where included) directive. For declarations of conformity about REACH and RoHS,
please visit the website https://consumer.huawei.com/certification.
EU regulatoryconformance
Statement
Hereby, Huawei Device Co., Ltd. declares that this device WS7001 is in compliance with the following
Directive: RED 2014/53/EU, RoHS 2011/65/EU, ErP 2009/125/EC.
The full text of the EU declaration of conformity, the detailed ErP information and most recent information
about accessories & software are available at the following internet address:
https://consumer.huawei.com/certification.
Restrictions in the 5 GHz band:
The 5150 to 5350 MHz frequency range is restricted to indoor use in: AT, BE, BG, CH, CY, CZ, DE, DK,
EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK(NI).
In accordance with the relevant statutory requirements in the UK, the 5150 to 5350 MHz frequency range
is restricted to indoor use in the United Kingdom.
Frequency Bands and Power 11

The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to
this radio equipment are as follows: Wi-Fi 2.4G: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm, 5470-5725
MHz:30dBm.
Legal Notice
Copyright © Huawei 2021. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTEANY KIND
OF WARRANTIES.
Trademarks and Permissions
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
Other trademarks, product, service and company names mentioned may be the property of their
respectiveowners.
Version Update
In order to improve the security of the product and provide you with a better user experience, we will push
version update information to you on a regular basis when an important update is released.
Privacy Policy
To better understand how we use and protect your personal information, please see the privacy policy at
https://consumer.huawei.com/privacy-policy.
End User License Agreement
Please read and agree to the End User License Agreement (HUAWEI EULA) on the product’s
management page before using the product.
For More Help
Please visit https://consumer.huawei.com/en/support/hotline for recently updated hotline and email
address in your country or region.
12

Instrukcja obsługi
POWER
1 2 3
WPS/RESET
1000M WAN/LAN
1
2
3 4
1
Wskaźnik
2Port zasilania
3
Port autoadaptacyjny WAN/LAN: umożliwia nawiązanie połączenia z Internetem
(np. za pomocą modemu optycznego, modemu szerokopasmowego itp.) oraz
przewodowego połączenia z urządzeniem sieciowym takim jak komputer.
4
Przycisk WPS/RESET: zapewnia funkcje zarówno przycisku WPS, jak i przycisku RESET.
13

Krok 1: Podłączanie przewodów
Modem optyczny/
szerokopasmowy/kablowy
(od dostawcy usług
szerokopasmowych)
POWER
1
2 3
WPS/RESET
1000M WAN/LAN
POWER
RESET
WAN
LAN
Internet
LAN
PON
• Ustaw wszystkie anteny w pozycji pionowej, aby zapewnić optymalny sygnał sieci Wi-Fi
®.
• Jeśli wskaźnik pozostaje czerwony, oznacza to, że router nie jest podłączony do Internetu.
Przejdź do „Kroku 2: Konfiguracja ustawień sieci”.
• Routery obsługujące automatyczną adaptację WAN/LAN mają porty sieciowe będące
portami combo WAN/LAN. Istnieje też możliwość określenia stałego portu WAN na stronie
zarządzania routerem w przeglądarce internetowej.
14

Krok 2: Konfiguracja ustawień sieci
Podłącz telefon komórkowy lub komputer
do sieci Wi-Fi routera (bez hasła).
Sprawdź nazwę Wi-Fi podaną na spodzie
nowego routera.
Otwórz przeglądarkę; nastąpi
automatyczne przekierowanie.
(Jeśli strona nie zostanie
automatycznie wyświetlona,
wprowadź adres 192.168.3.1).
1
2
Wi-Fi Name: XXXXXX
Zaczynamy
15
Wi-
Fi
Wi- Fi
XXXXXX
Połączono

3
Wprowadź nazwę konta szerokopasmowego i hasło do niego.
Jeśli połączenie z Internetem nie wymaga konta i hasła, pomiń następny krok.
• Jeśli nie pamiętasz nazwy konta
szerokopasmowego i hasła do niego,
skontaktuj się z operatorem sieci
szerokopasmowej, aby uzyskać te dane.
• Aby skonfigurować połączenie VLAN
w swojej sieci, skontaktuj się z operatorem
sieci szerokopasmowej w celu potwierdzenia
parametrów VLAN, a następnie włącz
przełącznik VLAN na ekranie.
16
Kreator dostępu do
Internetu
Konto szerokopasmowe
Hasło szerokopasmowe
VLAN
Dalej

4
Ustaw w nowym routerze nową nazwę Wi-Fi, hasło Wi-Fi i hasło administratora.
Włącz funkcję Priorytet 5 GHz: gdy siła sygnału jest wystarczająca, aby zwiększyć
prędkość połączenia w stosunku do pasma 2,4 GHz, priorytetowo wykorzystywane jest
pasmo Wi-Fi 5 GHz.
17
Kreator dostępu do
Internetu
Konfiguracja ukończona.
Kreator dostępu do
Internetu
Priorytet 5 GHz
Nazwa sieci Wi-Fi
Hasło do sieci Wi-Fi
Hasło logowania
Potwierdź hasło
Dalej