Huawei Quidway S3000-EI Series User manual

Huawei Technologies Proprietary
HUAWEI
Quidway S3000-EI Series Ethernet Switches
Installation Manual
VRP3.10

Huawei Technologies Proprietary
Quidway S3000-EI Series Ethernet Switches
Installation Manual
Manual Version T2-080473-20051116-C-1.02
Product Version VRP3.10
BOM 31041073
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support
and service. If you purchase the products from the sales agent of Huawei Technologies Co.,
Ltd., please contact our sales agent. If you purchase the products from Huawei
Technologies Co., Ltd. directly, Please feel free to contact our local office, customer care
center or company headquarters.
Huawei Technologies Co., Ltd.
Address: Administration Building, Huawei Technologies Co., Ltd.,
Bantian, Longgang District, Shenzhen, P. R. China
Postal Code: 518129
Website: http://www.huawei.com

Huawei Technologies Proprietary
Copyright © Huawei Technologies Co., Ltd. 2006. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co.,
Ltd.
All other trademarks and trade names mentioned in this document are the
property of their respective holders.
Notice
The information in this document is subject to change without notice. Every effort
has been made in the preparation of this document to ensure accuracy of the
contents, but all statements, information, and recommendations in this document
do not constitute the warranty of any kind, express or implied.

Huawei Technologies Proprietary
About This Manual
Release Notes
The corresponding product version of this manual is VRP3.10.
Related Manuals
The related manuals are listed in the following table.
Manual Content
Quidway S3000-EI Series
Ethernet Switches Operation
Manual
Introduces such modules as getting started, port,
VLAN, multicast protocols, QoS/ACL, integrated
management, STP, security, and system
management.
Quidway S3000-EI Series
Ethernet Switches Command
Manual
Introduces the commands of such modules as
getting started, port, VLAN, multicast protocols,
QoS/ACL, integrated management, STP,
security, and system management.
Organization
Quidway S3000-EI Series Ethernet Switches Installation Manual mainly introduces
the hardware features, installation, configuration and maintenance of S3000 EI Series
Ethernet Switches. To avoid any possible device damage and personal injury before
the installation and during the installation, please read the manual carefully. The
manual consists of the following chapters.
zChapter 1 Product Introduction
The chapter gives a brief introduction to S3000-EI Series Ethernet Switches.
zChapter 2 Installation Preparation
The chapter introduces such topics as the environmental requirements of S3000-EI
Series Ethernet Switches, the instructions for the installation, the installation tools and
so on.
zChapter 3 Installation
The chapter introduces the installation of the S3000-EI Series Ethernet Switches,
module installation, connections of the power cable, ground wire and the console
cable.

Huawei Technologies Proprietary
zChapter 4 Powering on Switch for the First Time
The chapter introduces the booting process of S3000-EI Series Ethernet Switches,
including the power-on booting of the switch and the system initialization.
zChapter 5 BootROM and Host Software Loading
The chapter introduces several means to upgrade the software of S3000-EI Series
Ethernet Switches.
zChapter 6 Maintenance and Troubleshooting
The chapter introduces fan status and problems that might occur during the
installation and the booting of S3000-EI Series Ethernet Switches and the respective
solution.
zChapter 7 Optional Interface Modules
The chapter introduces the interface modules supported by S3000-EI Series Ethernet
Switches.
zAppendix A Lightning Protection of the Switch
The appendix introduces lightning protection of the switch.
Intended Audience
The manual is intended for the following readers:
zNetwork engineers
zNetwork administrators
zCustomers who are familiar with network fundamentals
Conventions
The manual uses the following conventions:
I. General conventions
Convention Description
Arial Normal paragraphs are in Arial.
Boldface Headings are in Boldface.
Courier New
Terminal Display is in Courier New.

Huawei Technologies Proprietary
II. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
# A line starting with the # sign is comments.
III. GUI conventions
Convention Description
< > Button names are inside angle brackets. For example, click
the <OK> button.
[ ] Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].
IV. Keyboard operation
Format Description
<Key> Press the key with the key name inside angle brackets. For
example, <Enter>, <Tab>, <Backspace>, or <A>.
<Key1+Key2> Press the keys concurrently. For example, <Ctrl+Alt+A>
means the three keys should be pressed concurrently.
<Key1, Key2> Press the keys in turn. For example, <Alt, A> means the
two keys should be pressed in turn.

Huawei Technologies Proprietary
V. Mouse operation
Action Description
Select Press and hold the primary mouse button (left mouse
button by default).
Click Select and release the primary mouse button without
moving the pointer.
Double-Click Press the primary mouse button twice continuously and
quickly without moving the pointer.
Drag Press and hold the primary mouse button and move the
pointer to a certain position.
VI. Symbols
Eye-catching symbols are also used in the manual to highlight the points worthy of
special attention during the operation. They are defined as follows:
Caution,Warning, Danger: Means reader be extremely careful during the
operation.
Note,Comment, Tip,Knowhow,Thought: Means a complementary
description.
Environmental Protection
This product has been designed to comply with the requirements on environmental
protection. For the proper storage, use and disposal of this product, national laws and
regulations must be observed.