Hubert Nova life 40257-001-53 User manual

INSTRUCTIONS MANUAL
LED INTERIOR TABLE LAMP
for Hubert
Art Nr. 40257-001-53
14
Available 3 mode (Cold light - Warm light - Natural light), excellent color reality and eye-protection.
Adopt high performance LED light and components, lighting more concentrate.
High sensitivity touch panel, elegant control experience.
3 - Grade brightness strengths, applicable to different lighting requirements.
Folding and biaxial rotary design, easy to get best lighting angle.
Low energy consumption design, saving 80% than incandescent lamp.
Does not contain the Tungsten, Mercury and other toxic metal, environmental friendly.
No fragile glass parts, safe and ease.
Digital tube display with Calendar and alarm clock.
Main Function:
Battery replacement:
Care and Cleaning
EXTERIOR MAINTENANCE
1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water,
never a solvent) to wipe the surface of the fixture.
2. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to
dust or wipe carefully.
Light bulb
Max power
consumption 5W
Luminous
flux 300Lm/360Lm Working
voltage
Color
temperature
Cold light 6500K/360Lm
Warm light 3000K/300Lm
Cold light and Warm light 4000K
Max Power 5W
DC 5V-1200mA
USE "+" screwdriver to
open the battery cover
1pcs CR2032

2 3
User guide
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting installation of the fixture or
removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing
the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
Pre-Installation
TOOLS REQUIRED
Phillips
Screwdriver Knife
Light Operation instruction
Calendar Operation instruction
Connect the power adapter in
the rear of the lamp holder.
Touch to turn on the power
supply (please refer to Opera-
tion instructions):
Touch key instructions:
Turn on/off the lamp: touch “ON/OFF”
When adjusting the lamp arm,
please hold the base.
Arm adjustable range: 180
(excessive adjustment may
cause damage)
Chimney angle adjustable, to
meet your lighting demands.
Adjustable range: 75 of each
side (excessive adjustment
may cause damage)
Lighting area:
Adjustable angle of the lamp
stand: 90
When adjusting the lamp arm,
please hold the base.
180º
°
.
. .
. .
150º90º
° °
power
ON/OFF
UP DOWN
M
MODE
set down
up
S
Brightness adjusting: touch “ UP ” or “ DOWN ”
Lighting mode: Cold light - Warm light - Natural light, Switchable
In setting mode, clieck it to increase
S (setting)
( up key )
Press “ S ” for around 3 second, the “ MONTH ” will flicker, then
click “ ” and “ ” to adjust “ MONTH ”, after “ MONTH ” setting,
click “ S ” key again to set the “ DATE ”, “ HOUR ”, “ MINUTE ”.
After “ MINUTE ” setting, click “ S ” again, “ 24H ” will flicker , then
“ ” and “ ” to select “ 12 ” or “ 24H ”.
Then click “ S ” again to active alarm clock, and click “ ” and “ ”
to set alarm time.
In setting mode, clieck it to decrease.
* In normal time mode, click it to turn on/off the alarm clock.
( down key )
Alarm
Month
Date
Hour
Minute
Temperature