HUCK Seiltechnik Spider User manual

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 1 -
AAssembly Instructions
Spider
Art. No. 5000-6-4
Operator: _____________________________________________________
Location:______________________________________________________

2 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc
Revision history
Revision 0 –2013-11-27
The first allowed version
Assembly Instructions
Revision 10 –2020-06-25
Mindestraum nach „Excel-Tabelle“ geändert + Stückliste Ringschraube mit Hebeseil
All rights reserved
© Copyright 2015 Huck Seiltechnik GmbH

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 3 -
Contents
AAssembly Instructions Spider Art. No. 5000-6-4 ...................................................................1
1Introduction Assembling ...............................................................................................................4
2Data sheet Spider, Art. 5000-6-4...................................................................................................6
3Delivery contents (parts list with part numbers).........................................................................8
4Required Spaces - Top view....................................................................................................... 14
5Post installation checks.............................................................................................................. 27
BMaintenance Instructions .......................................................................................................... 27
6Introduction Maintenance........................................................................................................... 28
7General maintenance information.............................................................................................. 29
8Maintenance timetable ................................................................................................................ 31
9Regular maintenance................................................................................................................... 32
10 Monthly maintenance.................................................................................................................. 33
11 Quarterly maintenance................................................................................................................ 33
12 Half yearly maintenance.............................................................................................................. 33
13 Annual maintenance.................................................................................................................... 34
14 Maintenance printout................................................................................................................... 36
15 Hand over document................................................................................................................... 38
List of Tables
Table 3-1: Delivery contents, in words .....................................................................................................8
Table 3-2: Delivery contents, in symbols..................................................................................................9

4 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc
1 Introduction Assembling
1.1 General information
This equipment should be installed, inspected, maintained and operated in
accordance with EN1176-7 guidelines.
Before installation work commences, please check that you have all of
the equipment and fixation components in the parts list provided (see
Tables 3-1 and 3-2).
Please consider that the installation has to be carried out only on even
terrain (max.slope up to 3%).
Any spare parts that may be required can be obtained directly from your
supplier or from Fa. Huck Seiltechnik GmbH
Adress: Huck Seiltechnik GmbH
Dillerberg 3
D-35614 Aßlar/Berghausen
Tel. [phone]
Fax [phone]
Please do not hesitate to call your supplier if you have any problems during
installation or with any other questions. You can reach us at the following Tel.
[phone].
Following installation, complete assembly instructions, maintenance
instructions and a maintenance record must be sent to the operator
who must confirm receipt in writing. See the last page of this document.
All nuts and bolts are hot-dip galvanised or stainless steel.
One of the characteristics of stainless steel is that uncontrolled cold
welding may occur when the nuts are tightened. To prevent this, it is
necessary to spray the nuts and bolts with Teflon spray or another
similar lubricant.

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 5 -
Drawings / Views
All optical drawings are showing only the measurements/dimensions and
are no mandatory technical views of the complete item.
We reserve the right to change technical details of our articles which are
serving for the further development of our articles and are reasonable for
the customer.
Measurement tolerances
Because of the properties and characteristics of the components, minor
measurement tolerances compared to the indication on the sketches are
possible.
This concerns all shown measurements except the foundation
measurements resp. measurements below upper edge ground level/play
area.

6 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc
2 Data sheet Spider, Art. 5000-6-4
1. Component zone: 8750 x 8750 mm
Safety zone: 10360 x 10360 mm
Installation zone: 12525 x 12525 mm (larger than the safety zone!)
Total ground height: 6400 mm
Fall height: 1040 mm
Fall protection area: 97,30 m²
2. Required safety surface:
Surface material
Description / mm
Minimum
thickness
of layer / mm
Maximum
height
of fall / mm
Chipped bark
20 –80 Particle size
300
≤ 2000
400
≤ 3000
Wood chippings
5 –30 Particle size
300
≤ 2000
400
≤ 3000
Sand
0,25 –2 Grain size
300
≤ 2000
400
≤ 3000
Gravel
0,25 –8 Grain size
300
≤ 2000
400
≤ 3000
Other ground
materials
As recommended by manufacturer
Critical drop
height as tested
3. Sand and gravel must be well rounded to remove most of the silty or clayey particles. Washed sand or gravel is considered to be alluvial
and free from silty or clayey particles. With gravel this is generally described as "pearl gravel". Degree of non-uniformity D60/D10 < 3.0.
The grain size can be determined by using a sieve method.
4. Name and overall dimension of the largest component:
Steel post / lg. 7220 mm, Ø 193,7 mm
5. Name and weight of the heaviest component:
Steel post / 210 kg
6. Intended age group: 6 years and over
7. Please note that this equipment is set in concrete.
Foundation:
Concrete: C25/30
Required concrete: 8,70 m³
Foundation size: 4x –1700 x 1700 x 700 mm
1x –1000 x 1000 x 600 mm
Concrete upper edge: 400 mm below upper edge (O.K.) of play level
Excavation size:
4x –1700 x 1700 x 1200 mm (incl. 100 mm drainage layer)
1x –1000 x 1000 x 1100 mm (incl. 100 mm drainage layer)

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 7 -
8.
Round off foundation edges (min.R = 100 mm)! Sizes of fundations are “4-5”
(natural ground).
Soil class 4: soft to medium plasticity, interleave bound, with minor portion of
stone (portion < 30% with bigger diameter of 63 mm grain size).
Soil class 5 : ground with soil class 3 and 4 with big portion of stones
(portion > 30% with bigger diameter of 63 mm grain size).
In case of sandy and soft soils, the surface measure of foundations have to be
enlarged for about 50%!
9. Assembly time, once foundations completed: 3 hours.
Required assistants: 3 persons.
10. Any spare parts which may be required can be obtained directly from
your supplier.
11. We hereby confirm that this item of play equipment has been tested and
certified in accordance with the play equipment standard EN 1176.

8 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc
3 Delivery contents (parts list with part numbers)
3.1 In words
Table 3-1: Delivery contents, in words
Pos.
Quantity
Element /
Description
Size
O.K.
Missing
01
1
Steel post
Lg. 7220 mm /
Ø 193,7 x 6,3 mm
02
1
Net component
Ca. 8200 x 8200 mm
03
2
Rubber membrane
(pre-assembled
on Pos.02)
400 x 400 mm
04
1
Mast cap
Ø 360 mm
05
1
Eyebolt with lifting rope
(only for lifting the net - will
be removed later)
M16
06
1
Net Plate-Post Connecter
(pre - assembled
on Pos.2)
Ø 360 mm
07
1
Threaded bolt, nut, nyloc
nut, washer
M16 x 165 mm
08
4
Turnbuckle VA
M20
09
4
Anchor chain
13 mm / Lg. 1250
mm
10
8
Shackle galvanized
M12
11
4
Foundation anchor
galvanized
Ø 20 mm
Lg. 750 mm
12
1
Anchor plate
500 x 500 mm
13
1
Loctite
3 ml
14
64
Foundation Steel
(provided by Customer)
Lg. 1600 mm /
Ø 12 mm
15
32
Foundation Steel
(provided by Customer)
Lg. 650 mm /
Ø 12 mm
16
1
Middle Foundation Pipe
(provided by Customer)
Lg. 650 mm /
Ø 300 mm

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 9 -
3.2 In symbols
Table 3-2: Delivery contents, in symbols
Pos.
Quantity
Symbol
01
1
Lg. 7220 mm /
Ø 193,7 x 6,3 mm
02
1
Ca.
8200 x 8200 mm
03
2
400 x 400 mm
04
1
Ø 360 mm
05
1
M16

10 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc
Pos.
Quantity
Symbol
06
1
Ø 360 mm
(pre - assembled on Pos.2)
07
1
M16 x 165 mm
08
4
M20
09
4
Lg. 1250 mm
10
8
M12

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 11 -
11
4
Ø 20 mm
Lg. 750 mm
12
1
500 x 500 mm
13
1
3 ml
14
64
Lg. 1600 mm /
Ø 12 mm
(provided by Customer)
15
32
Lg. 650 mm /
Ø 12 mm
(provided by Customer)
16
1
Lg. 650 mm /
Ø 300 mm
(provided by Customer)

12 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc
Abreviations for Spider
AB
The legally prescribed setting times must be observed!
BWk
Install reinforcement constructively!
D
Concrete C25/30 (for foundations)
DT
Detail view
EFB
Single foundation with reinforcement (4x)
ER
Ground, fall protection etc. (ground) 100 mm thick
F
Fall protection
FGS
Hook the catching rope with shackle pos. 10 onto the
chain pos.9!
G
Drainage layer
KNR
Middle foundation pipe (On site customer) / Pos. 16
Lg.
Length
LRB
The intermediate space (fill the space between empty tube
and steel mast with liquid concrete!)
MDN
Guide the mast through the net
ML
Mast length
M.Lot!!
Steel post must be set up vertically!
O.K
Upper edge of playing level
O.K.F.
Upper edge of foundation
PSE
Safety area incl. safety area according to recommendation
PSN
Safety area incl. safety area according to standard
R
Radius

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 13 -
Loctite-Thread locking adhesive!
Glue all screws, nuts and sleeves with loctite.
(not less than 5 drops !)
(except for Nylock nuts)

14 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc
4 Required Spaces - Top view

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 15 -
Foundation plan - Side view

16 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc
Foundation plan –top view

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 17 -

18 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc
Installing Pos. 1

\\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc - 19 -
Installing Pos.2 –Raise net

20 \\CAD1\Standard\5000-6-4\Montageanleitung\Spider_5000_6_4_ST_B_L_1_GBR.doc