HULALA HOME SBPZ0887 User manual

HULALA
H O M E
01/19
NOTE:
This brochure contains IMPORTANT safty info. Please read and keep for future
reference.
ITEM NO.SBPZ0887

MAINTAINANCE AND WARNING
1.Keep furniture away from heat sources.
2.Do not clean furniture with harsh cleaner or polishes.Do not use
detergents,solvents,abrasives,spray packs or leather cleaner.
Use non-color mild soa with warm water to clean spills(Mix 1:10
soap to water).
3.Do not place furniture under direct sunlight,material will possibly
fade over time.
4.Do not use on site dry cleaning machine.Children should not climb
or jump on the furniture.
5.Do not write on furniture that is not protectedby a padded barrier.
6.Not for commercial use,only for residential use.
Weight Limitation
100 LBS
02/19

2PERSONEN
03/19
A
B
C
D
E
F
G
H
H
H
I
J
L
KM
N
O

PARTS LIST
A B CDx1
E F GHx3
I J K
x1
x1
x1
x1
x1
x1
x1
x1
x1
04/19
L x1
M x1 N x1 Ox1

HARDWARE LIST
HARDWARE SPARE LIST
#1 x36 #3 #4 #5 #6
x4 x4 x16
TOOL LIST
#14 #15
x1 x1
M4
05/19
#2 x28
#7 x4 #9 x2 #8 x4 #10 #11 #12
x4 x2 x4
#1 x1 #2 x1
Ø3*15mm
Ø3.5*15mm
x8
∅1/4''*2''
Ø3*16mm Ø3.5*35mm
1/4"*1/2"
#13 x8
#3 #4 #5 #6
x1 x1 x1 x1
Ø1
4''*2''
Ø3*16mm Ø3.5*35mm

ASSEMBLY INSTRUCTIONS
STEP-1
1.Aligned part (O) with leg(N&M)and then insert part (O) into part (N&M),make
sure all holes aligned and use bolt #12 to attach them ，tighten screw #12 with
allen key#14.
Insert leg stand into the bottom （B），make sure all holes aligned and then
use bolt#5 &spring washer#13 to attach them，tighten screw#5 with allen
key#14.
#14
#5
06/19
B
B
N&M
N
M
N
M
x8 x1
#12 x4
Ø1/4''*2''
1/4"*1/2"
#12
#12
#5 #5
#5
#5
#5
#5
#5
#5
#14
#12
#12
O
O
M&N
M&N
O
O
#14
#13 x8
#13

ASSEMBLY INSTRUCTIONS
STEP-2
1.Insert side panel (C＆D&E&F) into bottom panel (B),make sure all
holes aligned and then tighten it with allen key #14 as picture show.
07/19
C
E
F
D
B
C&E&F
B
D
#14 x1
#14
#14
B

ASSEMBLY INSTRUCTIONS
STEP-3
1.Insert top panel(A) into the corresponding hole of preassembled step
2，make sure all holes aligned and use allen key#14 to tighten it as
picture show.
x1
M4
08/19
C
E
F
D
A
A
D
C&E&F
A
#13
#14
#14

ASSEMBLY INSTRUCTIONS
STEP-4
1.Open the back panel (G),insert back panel(G) into the groove of
preassembled step 3,make sure all holes aligned and use screw#2 to
attach them ，tighten screw #2 with screwdriver#15.
09/19
1:
#15
#2X28
F
G
G
G
A
C
#15 x1 #2 x28
Ø3*15mm
#2x28

ASSEMBLY INSTRUCTIONS
STEP-5
1.Attention:After installation, adjust the adjustable leveler to keep the
cabinet balanced .
10/19
Attention:
After installation, adjust the
adjustable leveler to keep
the cabinet balanced .
A

#15 x1
ASSEMBLY INSTRUCTIONS
STEP-6
1.Use screw #1 to attach hinge #10 to door (J)&(L),tighten screw#1
with screwdriver#15.
2.Use screw #1 to attach hinge #11 to door (K),tighten screw#1 with
screwdriver#15.
11/19
J
L
K
K
J
#1 x12 #11 x2 #10 x4
#15
#1
#11
#11
#1
#1
#1
#1
#1
#1
#10
#10
#10
#10
#10
#11
#1
#15
Ø3.5*15mm

12/19
STEP-7
1.Use screw #1 to attach left door (J) and right door (L) to
pre-assemble unit at step 5 ,tighten screw with screwdriver #15.
#15 x1 #1 x16
ASSEMBLY INSTRUCTIONS
J
L
J
A
D
J
D
A
A
D
C
#10
#10
#10
#10
#10
#10
#1
#15
Ø3.5*15mm

13/19
STEP-8
1.Use screw #1 to attach middle door (K) to pre-assemble unit at step
7 ,tighten screw with screwdriver #15.
#15 x1 #1 x8
ASSEMBLY INSTRUCTIONS
K
F
AA
K
K
F
A
#11
#11
#1
#11
#11
F
#15
Ø3.5*15mm

#6 x16
ASSEMBLY INSTRUCTIONS
STEP-9
1.Insert shelf holder #6 into the corresponding hole of panel
(C)&(D)&(E)&(F) and then attach panel (H&I) to it.
14/19
Shelf holder can be
adjusted up or down
#6X16
A
D
H
H
IH
C
E
F

ASSEMBLY INSTRUCTIONS
15/19
Hinge adjustment method
Horizontal
by screw adjustment!
Vertical via slots in
the mounting plate
or via cam adjustment!
Concealed hinges are three-way adjustable:
Side panels
Door
Side panels
Door
Side panels
Door
In-and-out
by loosening the hinge arm
mounting screw or via cam
adjustment!
Side panels
Door
Side panels
Door
Side panels
Door
Concealed hinges are three-way adjustable:
Concealed hinges are three-way adjustable:
STEP-10

#3 x4
ASSEMBLY INSTRUCTIONS
STEP-11
1.Use screw #1 to attach part #7 to back panel (G),tighten screw #1 with screwdriver
#15.
#7 x2 x1
16/19
#15
#15
#7 x2
#3
G
Ø3*16mm

WALL
1.
2.
3.
WALL
WALL
NOT PROVIDED
#8 x4
ASSEMBLY INSTRUCTIONS
STEP-12
1.Install the anti-collapse device.
2.Mark the position on the wall, that corresponds to the location of
part #7 on the back of panel (G); Drill and insert the expandable
screw #8 by hammer.
3.Assemble the part #7 to the wall. Align the hole in the part #7 with
the expandable screw #8, use screw #4 to attach it and tighten by
screwdriver #15.
#4
x2
#7 x4 x1
17/19
#15
#8x4
#4x4 #15
#7x2
#4
#7
Ø3.5*35mm

#9 x2
ASSEMBLY INSTRUCTIONS
STEP-13
Let the plastic belt #9 pass through the both part #7 and pull tightly.
18/19
WALL
1.
2.
A
#9x2
#7
#7
#9x2

WARRANTY
1.We strive to offer high-quality products,and we also try our
best to satisfy each and every customer that orders from
us with product or service as needed.
2.We provide 30 days warranty starting from the time you
receive the item.Each customer must provide a record of
their order such as the order number,or item receipt for any
items that are out of the warranty period you may also still
receive.
3.Replacement parts by purchasing them with our company
if they are available.
Are you having difficulty
With assembly?Missing parts?
Please send email with your order No to
[email protected]
For return,please check the return policy with
the retailer or market place you bought from.
Appreciate your purchasing from us.
Pop up your life by our furniture piece!
19/19