HULALA HOME SBHM0574 User manual

HULALA
H O M E
01/26
NOTE:
This brochure contains IMPORTANT safty info. Please read and keep for future
reference.
ITEM NO.SBHM0574

MAINTAINANCE AND WARNING
1.Keep furniture away from heat sources.
2.Do not clean furniture with harsh cleaner or polishes.Do not use
detergents,solvents,abrasives,spray packs or leather cleaner.
Use non-color mild soa with warm water to clean spills(Mix 1:10
soap to water).
3.Do not place furniture under direct sunlight,material will possibly
fade over time.
4.Do not use on site dry cleaning machine.Children should not climb
or jump on the furniture.
5.Do not write on furniture that is not protectedby a padded barrier.
6.Not for commercial use,only for residential use.
Weight Limitation
100 LBS
02/26

EXPLOSIVE VIEW
2PERSONEN
03/26
OVERVIEW
A
B
C
D
E
F
F
G
H
I
J
K
L
L
L
L
M

PARTS LIST
A B CDx1
E F GHx1
I J K
x1
x1
x1
x1
x2
x1
x1
x1
x1
04/26
L x4
Mx1

HARDWARE LIST
HARDWARE SPARE LIST
#1 x52 #2 x26
#1 #2x1 x1
05/26
∅3*15mm*7#
∅3.5*14mm*7#

#5 x8 #6 #7 #8
#9 #10
TOOL LIST
#11 #12 #13
#15 #16x1 x1
x8 x4 x4
x4 x8 x4 x4 x4
HARDWARE LIST
06/26
#4 x8
#14 x2
#3 x16
∅1/4*1-3/4"∅3.5*19mm*7#
∅3*35mm*7#

ASSEMBLY INSTRUCTIONS
STEP-1
#4 x8 #5 x8 #6 x8
07/26
#15 x1
#4x8 #5x8
#6x8
#15
L
B
L
L
L
L
∅1/4*1-3/4"
L
B
B
Use bolt #4、spring washer #6 and plat washer #5 to attach leg (L)
to the corresponding hole of part (B) as picture show，tighten bolt
#4 with allen key #15.

ASSEMBLY INSTRUCTIONS
STEP-2
08/26
M
B
M
Screw leg (M) into the corresponding hole of part (B) with
hand.

ASSEMBLY INSTRUCTIONS
STEP-3
#15 x1
09/26
B
E
D
D
B
D
B
#15
#15
E
B
B
E
Insert panel (E)&(D) into the corresponding hole of part (B) ，make
sure all holes aligned and use allen key #15 to tighten it as picture
show.

ASSEMBLY INSTRUCTIONS
STEP-4
10/26
#15 x1
C
B
C
B
C
#15
B
E
D
Insert panel (C) into the corresponding hole of part (B) ，make
sure all holes aligned and use allen key #15 to tighten it as picture
show.

ASSEMBLY INSTRUCTIONS
11/26
#9 x4 #3 x16 #16 x1
#9
#9
#3 #3
A
#16
#9x4
∅3.5*19mm*7#
#3x16
Use screw #3 to attach part #9 to the corresponding hole of top
panel (A)，make sure all holes aligned and tighten screw #3 with
screwdriver #16.

ASSEMBLY INSTRUCTIONS
STEP-6
12/26
#15 x1
#15
#15
C
E
D
A
C
A
D
#15
E
A
Insert top panel (A) into the preassemble unit at step 4，make sure
all holes aligned and use allen key #15 to tighten it as picture
show.

ASSEMBLY INSTRUCTIONS
13/26
STEP-7
#2 x26 #16 x1
G
G
Open
#16
#2x26
D
C
E
G
B
∅3*15mm*7#
#2
Open the panel (G), insert panel (G) into the groove of
preassemble step 6，make sure all holes aligned and use screw #2
to attach it ，tighten screw #2 with screwdriver #16.

ASSEMBLY INSTRUCTIONS
14/26
STEP-8
Attention:
Before the next step, adjust
the feet of the locker to keep
it level.

ASSEMBLY INSTRUCTIONS
15/26
STEP-9
#10 x8
Shelf holder can be
adjusted up or down
C
E
D
F
F
#10x8
#10
#10
#10
#10
#10
#10
#10
#10
A
B
Insert shelf holder #10 into the corresponding hole of panel
(C)&(E)&(D),make sure shelf holders #10 are level，and then
attache panel (F) to it.

ASSEMBLY INSTRUCTIONS
16/26
STEP-10
When installing
hinge，please pay attention
to distinguish the category
of hinge!!!!
#7 x4 #1 x8 #16 x1
#16
#7x4
#1x8
#7
#7
#7
#7
#1
#1
#1
#1
H
K
∅3.5*14mm*7#
Use screw #1 to attach hinge #7 to doors (H)&(K)，make sure all
holes aligned and tighten screw #1 with screwdriver #16.

ASSEMBLY INSTRUCTIONS
17/26
STEP-11
#1 x16 #16 x1
#16
#1x16
#7
∅3.5*14mm*7#
H
K
C
AD
E
F
F
B
H&K
C&D
A
H&K
C&D
F
A
Aligne the corresponding hole of preassembled doors (H)&(K) with
the corresponding hole of side panel (C)&(D)，and then use screw
#1 to attach hinge #7 to side panel (C)&(D),tighten screw #1 with
screwdriver #16.

ASSEMBLY INSTRUCTIONS
18/26
STEP-12
When installing
hinge，please pay attention
to distinguish the category
of hinge!!!!
I
J
#8 x4 #1 x8 #16 x1
#1
#1
#1
#1
#8
#8
#8
#8
#16
#1x8
#8x4
∅3.5*14mm*7#
Use screw #1 to attach hinge #8 to doors (I)&(J)，make sure all
holes aligned and tighten screw #1 with screwdriver #16.

ASSEMBLY INSTRUCTIONS
19/26
STEP-13
#1 x8 #16 x1
#16
#1x8
#8
∅3.5*14mm*7#
I
I
E
A
A
E
A
I
E
Aligne the corresponding hole of preassembled door (I) with the
corresponding hole of middle vertical panel (E)，and then use screw
#1 to attach hinge #8 to middle vertical panel (E),tighten screw #1
with screwdriver #16.

ASSEMBLY INSTRUCTIONS
20/26
STEP-14
#1 x8 #16 x1
#16
#1x8
#8
∅3.5*14mm*7#
J
J
E
A
A
E
J
E
A
Aligne the corresponding hole of preassembled door (J) with the
corresponding hole of middle vertical panel (E)，and then use screw
#1 to attach hinge #8 to middle vertical panel (E),tighten screw #1
with screwdriver #16.