HumanCentric 101-2009 User manual

Model 101-2009
ADDITIONAL TOOLS REQUIRED
Universal Sound Bar Mount
www.humancentric.com/patents
PARTS INCLUDED
© 2017 HumanCentric Ventures LLC www.humancentric.com
Phillips Head Screwdriver
Adjustable Wrench
A friend to help!
Note: Not all parts will be used in the installation. Multiple configuration options are provided to fit dierent
TVs, and dierent parts are used for dierent configurations.
Confirm that the weight of the TV with the soundbar bracket and the soundbar does
not exceed the weight capacity limit of your TV mount before installing!
Bracket extension arms (2)
M6 bracket extension
bolts (4)
M6 bracket extension
nuts (4)
Soundbar Attachment
(attaches soundbar bracket to soundbar)
Choose one option based on soundbar attachment type
HARDWARE BAG 1:
Soundbar brackets (2)
HARDWARE BAG 2:
HARDWARE BAG 3:
TV Mount Attachment
(attaches soundbar bracket to TV mount)
Mounting screw options - choose one option based on TV hole size :
Mounting screw spacers - combine as needed to achieve proper spacing
M4 screw (2) M5 screw (2)
M6 screw (2) Soundbar peg and nut (2)
M6 x 14mm (4) M6 x 20mm (4) M6 x 30mm (4) M8 x 20mm (4) M8 x 30mm (4)
Small Spacer (8) Large Spacer (4) Flat spacing washer (2)
Fits TVs with VESA patterns from 75mm x 75mm to 600mm x 400mm.
COMPATIBLE WITH MODELS
Warning:
M4 and M5 washers(2)
1

© 2017 HumanCentric Ventures LLC www.humancentric.com
The last hole in the bottom end of the soundbar bracket will attach to the back of
your soundbar, and the top end of the bracket will attach to the lower pair of
VESA mounting holes on the back of your TV.
There are four options for bracket configuration - determine the appropriate one
for your setup by choosing from the options below:
1. DETERMINE BRACKET CONFIGURATION
Read the entire instruction manual, including the warnings at the end of the manual, before you start installation and
assembly. If you have any questions regarding any of the instructions or warnings, please contact the HumanCentric
support team for assistance at [email protected]
CAUTION
Use with products heavier than the maximum weights indicated may result in damage to the mounted devices or
personal injury.
IMPORTANT
Ensure that you have received all parts according to the parts list prior to installation. If any parts are missing or
damaged, please contact the HumanCentric support team for replacements at [email protected]
Lay your TV face-down on a soft, flat surface. Position the soundbar face-down below your TV.
(If you have already mounted your TV, remove the TV from the mount
and remove the mounting bracket from the back of the TV.)
Bottom end
No extension Straight extension Extension - angled out Extension - angled in
2

© 2017 HumanCentric Ventures LLC www.humancentric.com
If you have determined that you need the extension, attach the
extension arms to the soundbar brackets as shown. Note that the
bent edges of the brackets will face away from each other.
2. ATTACH SOUNDBAR BRACKETS TO SOUNDBAR
Attach the bottom end of the soundbar bracket (or the end of the extension bracket, if used) to the soundbar using one of
the following options:
M4 or M5 mounting screw holes
Use appropriate size screw with washer
M6 mounting screw holes
Install mounting pegs onto soundbar
bracket and slide pegs into mounting holes
mounting pegs
3. ATTACH SOUNDBAR BRACKET TO TV AND TV MOUNT
Align the holes in the soundbar bracket with the bottom set of VESA
holes on the back of the TV. Then place the TV mounting bracket on top
of the soundbar bracket.
1. DETERMINE BRACKET CONFIGURATION
TV mounting brackets
3

WARNINGS
The wall must be capable of supporting five times the weight of the device (such as a TV) and mount combined
Mounts must be attached as specified in the instruction manual. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by those with the necessary skills to install the
hardware. If you do not have the necessary skills, installation should be handled by a professional.
Use the mounting screws provided and do not over-tighten the mounting screws
This product contains small items that can be a choking hazard if swallowed. Keep these items away from children.
Do not use this product for any purpose not explicitly specified by manufacturer
This product is intended for indoor use only. Using this product outdoors could lead to product failure or personal injury.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
Check that the mount is secure and safe to use at regular intervals (at least every three months).
HumanCentric intends to make this manual accurate and complete. However, HumanCentric makes no claim that the information
contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the
installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
HumanCentric makes no representation of warranty, expressed or implied, regarding the information contained herein. HumanCentric
assumes no responsibility for accuracy, completeness or suciency of the information contained in this document.
3. ATTACH SOUNDBAR BRACKET TO TV AND TV MOUNT
Any questions? Contact us at [email protected], and we’re happy to help!
Select the appropriate size and length screw for your mounting holes. Then use the appropriate spacers to ensure that the
TV mount is parallel to the back of the TV and the mounting screws can be tightened all the way. The top holes will require
one more spacer than the bottom holes. See the chart below for some common configurations:
Screw Size
Top Hole
Spacer(s)
Bottom Hole
Spacer(s)
M6 x 14mm M6 x 20mm M6 x 30mm M8 x 20mm M8 x 30mm
4. ATTACH SOUNDBAR AND TV ASSEMBLY TO WALL MOUNT
Attach the TV to the wall-mount bracket per the manufacturer’s instructions.
© 2017 HumanCentric Ventures LLC www.humancentric.com
4