Hunter 35205 User manual

41787 04/28/2006 © 2006 Hunter Fan Company
www.hunterfan.com
The Care Free®
Warm Mist Humidifier
Models 35205, 35207, 36205, 36207
ENGLISH
See page 1
ESPAÑOL
Vea la página 15

41787 04/28/2006 © 2006 Hunter Fan Company
2
READ AND SAVE THESE INSTRUCTIONS
Thank you for purchasing the Care Free®
Warm Mist Humidifier by Hunter Fan
Company. Please read and save these
instructions to receive maximum benefit
and performance from your humidifier.
Important Safety Instructions:
Read all instructions before using
this humidifier.
CAUTION: To avoid electrical
shock and/or fire, please read all
instructions before use.
1. This humidifier may not work properly
on an uneven surface. ALWAYS place
this humidifier on a firm, level, and
water resistant surface. ALWAYS place
the humidifier at least six (6) inches
away from walls and heat sources, such
as stoves, radiators, or heaters.
2. ALWAYS place the humidifier in an area
that is out of the reach of children.
3. Before using the humidifier, extend
the cord and inspect for any sign of
damage. DO NOT use the product if the
cord has been damaged.
4. This product has a polarized plug as
a safety feature (one blade is wider
than the other). This plug will fit into
a polarized outlet only one way. If the
plug does not fully fit into the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician. DO
NOT attempt to defeat or override this
feature.
5. ALWAYS unplug and empty the
humidifier when it is not in operation or
while it is being cleaned.
6. DO NOT tilt or move the humidifier
while it is in operation. Never move
the humidifier while there is water in
the tank. Empty the water tank, turn
the unit off, and unplug the unit before
moving.
7. In addition to routine maintenance
which may be required, this humidifier
requires seasonal cleaning. Refer to and
follow the instructions for CLEANING
THE HUMIDIFIER AND THE WATER TANK.
8. This unit was designed to be used with
distilled and/or tap water. DO NOT add
scented oils, perfumes or fragrance
additives to the water.
9. DO NOT attempt to move or
disassemble the Base while there is hot
water still in the unit. Allow a minimum
of fifteen (15) minutes cooling time
before moving or disassembling the
Base.
10. ALWAYS use clean, cool tap water to fill
the Water Tank.
11. To avoid the risk of electrical shock, DO
NOT use an extension cord.
12. DO NOT operate outdoors. This
humidifier is for indoor use only.
13. DO NOT let water get into the air inlets
on the back of the enclosure, the cord,
or the plug.
14. DO NOT store or use gasoline or other
flammable vapors and liquids near the
humidifier.
15. DO NOT touch hot surfaces. DO NOT
place hands or face directly over the
Exhaust Grille while the unit is in
operation.
16. DO NOT allow the Exhaust Grille to
directly face a wall surface. Direct mist
aimed at a wall could cause damage,
particularly to wallpaper.

41787 04/28/2006 © 2006 Hunter Fan Company
3
Assembly Of Humidifier Parts
The Care Free®Warm Mist Humidifier has
a unique, patented design with several
innovative features:
• Removable Boiling Chamber –
The detachable heater can be easily
removed for cleaning and maintenance.
• Humidification System – Water is passed
through a heating element which creates
warm mist to humidify the air. Stagnant
water in the reservoir is eliminated due
to minimal water quantity in the boiler
reservoir.
• Built-In Antimicrobial Properties –
The plastic parts in this humidifier have
built-in antimicrobial properties to inhibit
the growth of bacteria, mold and fungi
that may affect these parts.
NOTE: The antimicrobial properties built-
into this humidifier do not extend to the
How The Care Free®Warm Mist Humidifier Works
water, humidified air or users. Conduct
routine cleaning and maintenance based
upon use and individual conditions.
• No White Dust – The Care Free® Warm
Mist Humidifier produces no white
dust that can settle on furniture or be
inhaled.
NOTE: You may notice mineral deposits
accumulating in the tank base or on
other components. This is normal and
comes with regular usage conditions. If
you would like to remove these deposits
and maintain humidifier performance,
please see the section CLEANING THE
HUMIDIFIER AND THE WATER TANK.
• Dishwasher Safe – All components of
The Care Free® Warm Mist Humidifier
are top-rack dishwasher safe, except for
the powered base.
k
ENGLISH

41787 04/28/2006 © 2006 Hunter Fan Company
4
1. Remove the Care Free® Warm Mist
Humidifier from its packaging.
2. Select a location for your humidifier. The
location should be flat, hard, water-
resistant, and at least six (6) inches
away from walls and sources of heat.
Mount the humidifier on a drip tray
if you are using the unit on a wood
surface or other surface which could be
damaged by accidental water spillage or
condensation.
HUNTER WILL NOT ACCEPT RESPONSIBILITY
FOR DAMAGE DUE TO WATER SPILLAGE.
3. Place the Base in the location you
selected. Take the Water Tank to a sink or
tub to fill with water.
4. Unscrew the Tank Cap by twisting it
counterclockwise and fill the Water Tank
with cool water.
NOTE: When the Water Tank is empty, the
refill indicator icon will turn ON and the unit
will stop. You must press the RESET button
after refilling the Water Tank to reactivate the
unit.
5. Replace the Tank Cap by screwing it
clockwise onto the Water Tank.
6. Place the Water Tank back onto the Base.
Make sure the Water Tank is properly
seated on the Base or the humidifier will
not work properly.
HUNTER WILL NOT ACCEPT RESPONSIBILITY
FOR DAMAGE DUE TO WATER SPILLAGE.
7. Make sure the Power Button is set to
OFF and plug the humidifier into the wall
outlet.
CAUTION: Never plug in the humidifier
while your hands are wet, as electric shock
could occur.
NOTE: Let the humidifier sit for one minute
after refilling the tank, before turning the
power back ON.
8. Push the Power Button to turn the
humidifier ON. Adjust the setting as
needed.
Base
Water
Tank

41787 04/28/2006 © 2006 Hunter Fan Company
5
Operating Your Humidifier
Functional Buttons
There are 6 buttons to control the functions
of the humidifier. You will hear a
confirmation ‘beep’ when a button is
pressed.
1. POWER – Press the POWER button
to set the humidifier to HI. Press
the POWER button again to turn the
unit OFF.
a. When initially turned ON after being
plugged in, the humidifier will
‘beep’ and all icons on the screen
will be temporarily illuminated.
After a few seconds, the LCD icons
will turn OFF, and the unit will be
in standby mode with the backlight
OFF.
b. Pressing POWER once will set the
unit to HI and turn the backlight
ON. The LCD screen will display the
Continue message (“CO %") which
means the unit will be continuously
on HI until set otherwise. After
a few seconds, the current room
humidity and the ROOM message
will be displayed.
c. If the unit is plugged in and has
been turned ON once, turning the
unit OFF and back ON will display
the Relative Humidity (RH) value last
used.
d. When the unit is ON, all backlights
will remain ON.
2. SETTING – The humidifier has two
settings: HI and LOW. Press the
SETTING button and the unit will
loop settings (HI-LOW-HI) while the
respective icon is illuminated.
3. UP – Each time the UP button is
pressed, the RH value will increase
by 5 %.
4. DOWN – Each time the DOWN
button is pressed, the RH value will
decrease by 5 %.
5. RESET – When the water level is
too low, the unit will turn itself
OFF. Pressing the RESET button will
reactivate the unit after you have
refilled the tank.
6. NITE GLO™ – Press the NITE GLO
button to turn the blue night light
ON or OFF.
UP
DOWN
SETTING
RESET
POWER
LIGHT
ENGLISH

41787 04/28/2006 © 2006 Hunter Fan Company
6
LCD Messages
1. Misting Control: When the humidity
is higher than the set humidity, the
heater will stop misting, and the
misting icon will blink. When the
unit is in normal misting mode, the
misting icon will be illuminated.
2. Continuous Indicator: When the
LCD screen displays the CO %
message, it will also illuminate
the continuous icon, indicating the
humidifier is working continuously.
3. Refill Warning: When the water
level is too low, the heater will stop.
The refill icon will blink to indicate
that the tank needs to be refilled.
After refilling the water tank, you
must press the RESET button to
reactivate the unit.
4. Humidity Set Range: Humidity may
be set between 40 % RH and 85
% RH in increments of 5 %. If the
humidity is set higher than 85 %, the
LCD screen will display the CO % RH
message, indicating the humidifier is
set to work continuously.
5. Humidity Display Range: The
humidity or ROOM display range is
40 % to 80 % RH. The LCD screen
will display LO % if the humidity in
the room is lower than 40 %. If the
humidity in the room is higher than
85 %, the LCD screen will display HI
%.
6. Setting Humidity: Press UP or
DOWN to change the humidity
setting by 5 % up or down,
respectively. The LCD screen will
display the SET message and the
digits on the screen will blink for
two seconds until you change the
setting. Once the humidity level
is set, the LCD screen will display
the current room humidity and the
ROOM message.
1
2
3
4
56
Operating Your Humidifier

41787 04/28/2006 © 2006 Hunter Fan Company
7
1. When the water level is low, push the
POWER button to turn the humidifier OFF
and unplug the humidifier.
NOTE: When the tank level is too low, the
humidifier will turn OFF.
2. Lift the Water Tank and take it to the sink
or a tub to refill.
3. Turn the Water Tank over and unscrew the
Tank Cap by twisting it counterclockwise.
4. Empty the Water Tank and refill it with
fresh, cool water. NEVER USE HOT
WATER.
5. Replace the Tank Cap by screwing it
clockwise onto the Water Tank. Make
sure that the tank cap is properly seated
before screwing it back onto the tank to
ensure a proper seal.
6. Place the Water Tank back onto the Base.
Make sure the Water Tank is properly
seated on the Base or the humidifier will
not work properly.
HUNTER WILL NOT ACCEPT RESPONSIBILITY
FOR DAMAGE DUE TO WATER SPILLAGE.
7. Make sure the Power Button is set to
OFF and plug the humidifier into the wall
outlet.
CAUTION: Never plug in the humidifier
while your hands are wet, as electric shock
could occur.
NOTE: Let the humidifier sit for one minute
after refilling the tank, before turning the
power back ON.
8. Push the Power Button to turn the
humidifier ON. Adjust the setting as
needed.
Base
Water
Tank
Refilling The Water Tank
ENGLISH

41787 04/28/2006 © 2006 Hunter Fan Company
8
Reassembly Of Humidifier Parts
Exhaust Grille
Medicine Cup
Water Tank
Boiler Cover
Boiling Chamber
Base
Tank Cap
Many regions have hard water with high
concentrations of minerals. When water
evaporates from the Care Free®Warm
Mist Humidifier, minerals may be left
behind. These minerals can form a hard
white scale which can be removed by
following the cleaning instructions. The
frequency of cleaning due to mineral build
up varies depending on the quality of
water you have. Failure to perform the
necessary cleaning steps can damage the
unit and affect performance.
NOTE: The Water Tank, Tank Cap,
Medicine Cup, Boiler Cover, Boiling
Chamber, and Exhaust Grille are
dishwasher safe in the top rack only.
1. Push the POWER button to turn the unit
OFF (the indicator light will be OFF) and
unplug the humidifier.
2. Remove the Water Tank and carry it to a
sink or a tub. Unscrew the Tank Cap by
twisting it counterclockwise and empty
any water in the Water Tank.
3. CAUTION: HEATING ELEMENT MAY BE
EXTREMELY HOT.
Allow at least fifteen (15) minutes for the
hot water in the Boiling Chamber to cool,
after turning the humidifier OFF, before
moving the Base or removing the Boiling
Chamber from the Base. Pull the Boiling
Chamber away from the Base to remove
the Boiling Chamber.
Cleaning The Humidifier And The Water Tank

41787 04/28/2006 © 2006 Hunter Fan Company
9
Boiler
Cover
Boiling
Chamber
Boiler
Base
4. Place the Boiling Chamber into an empty
sink and carefully lift the Boiling Chamber
Cover by pressing the Chamber Cover
Release Tab. This will expose the Heater.
Drain all water and rinse with cool, clean
water. Use a soft brush or sponge to clean
the Boiling Chamber and the Boiling
Chamber Cover.
5. Pour one (1) cup of white vinegar into the
Boiling Chamber and allow it to soak for
20-30 minutes. Rinse several times with
cool, clean water. Wipe the Boiler clean if
necessary.
6. Before reinstalling the Boiling Chamber,
make sure the three metal pins in the
Chamber are clean and completely dry.
Place the Boiling Chamber Cover into the
Boiling Chamber and slide the Chamber
slowly back into place. Make sure the
Chamber fits properly in the Base.
7. To disinfect the Water Tank, create a
solution of one (1) cup of white vinegar
and one (1) gallon of clean water. Fill the
Water Tank with the solution and allow
it to soak for 20 minutes, occasionally
swishing the solution to wet all
interior surfaces. Empty the Water Tank
completely and rinse with clean water
several times. Refill the Water Tank with
cool, clean water and place it back on the
humidifier Base.
8. NEVER use any metal or hard object,
which could cause scratching of the
humidifier surface, to clean plastic parts.
NEVER use gasoline, kerosene, glass
cleaner, furniture polish, paint thinner,
or other household solvents to clean any
part of the humidifier.
9. The Water Tank should be drained EACH
DAY, rinsed, and refilled with clean tap
water.
10. To clean the exterior surfaces, use a
solution of water and mild detergent
with a damp cloth. Rinse the surfaces
with clean water and dry with a cloth.
Allow sufficient time to dry before
plugging the electrical cord back into the
outlet.
11. Place the Water Tank back onto the Base
and resume normal use.
Base
Water
Tank
ENGLISH

41787 04/28/2006 © 2006 Hunter Fan Company
10
If you do not plan to use your humidifier
for an extended period of time, such
as during the summer months, it is
important that you follow these instructions
to help prevent problems from developing
in the unit.
1. Clean your humidifier as outlined in
the CLEANING THE HUMIDIFIER AND
THE WATER TANK section.
2. Make sure all water is emptied from
Storage Tips
the tank and the hot and cold water
reservoirs.
3. Make sure the unit is completely dry.
4. Leave the Tank Cap off to expose the
Water Tank to air.
5. Pack the humidifier in the original
carton and store it in a cool, dry
place.
• Problem: Humidifier not
misting.
Solution:
1. Make sure the unit is plugged in.
2. Check the circuit breaker or fuses.
3. Adjust the humidity level using
the UP or DOWN buttons. Once the
room reaches the set humidity level,
the humidifier will turn OFF; this is
normal.
4. Check the LCD to determine if the
unit needs to be RESET. If so, press
the RESET button.
5. Remove and refill the Water Tank.
6. Reposition the Water Tank on the
Base.
• Problem: Humidity output and
water usage decreased.
Solution:
1. Check the LCD screen to make sure
the humidifier is set to the desired
humidity level.
2. Check the LCD to determine if the
unit needs to be RESET. If so, press
the RESET button.
3. Clean any components that have
mineral build-up. Refer to the section
on CLEANING THE HUMIDIFIER AND
THE WATER TANK.
Troubleshooting
If you have questions or problems, please call 1-888-830-1326 for assistance before returning
the unit to the retailer.

41787 04/28/2006 © 2006 Hunter Fan Company
11
Service Parts
To obtain a service part for your humidifier, call Hunter Customer Service at 1-888-
830-1326 or e-mail us at T[email protected]. Please be prepared to tell the
operator the model number of your humidifier, the name of the part you need to replace,
and the part number.
Model
Number Boiler Cover Exhaust Grille Medicine Cup Tank Cap Water Tank
35205,
35207,
36205,
36207
96362-01-325 86731-01-325 75690-01-325 83736-01-325 96361-01-326
ENGLISH

41787 04/28/2006 © 2006 Hunter Fan Company
12
Hunter Fan Company, Inc. makes the following warranty to the original residential user
or consumer purchaser of the Care Free® Warm Mist Humidifier.
If any part of the Care Free® Warm Mist Humidifier ("Humidifier") fails during
the first three (3) years from the date of installation due to a defect in material or
workmanship, we will provide a replacement part free of charge. If no replacement
part can be provided, we will replace your humidifier.
If your humidifier fails anytime within one (1) year after the date of installation due
to a defect in material or workmanship, labor to repair the defect will be provided
free of charge at our nearest service center or at our Service Department in Memphis,
Tennessee. You will be responsible for all parts and labor costs after this one year
period.
If your humidifier water tank, boiler cover, boiling chamber, base, knobs or tank cap
fail at any time within one (1) year after the date of sale to you due to a defect in
material or workmanship, we will repair, or at our option, replace the water tank,
boiler cover, boiling chamber, base, knobs or tank cap free of charge for parts or labor
at our nearest service center or at our Service Department in Memphis, Tennessee.
IF THE ORIGINAL RESIDENTIAL USER OF CONSUMER PURCHASER CEASES TO OWN THE
HUMIDIFIER, THIS WARRANTY AND ANY IMPLIED WARRANTY WHICH THEN REMAINS IN
EFFECT, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE VOIDED.
NO WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RESPECT TO
THE FILTER.
THE WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THE DURATION OF
ANY IMPLIED WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IN RESPECT TO THE
MOTOR IS EXPRESSLY LIMITED TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH
ABOVE.
This warranty is voided if your humidifier is not purchased and used in the USA or
Canada.
This warranty excludes and does not cover defects, malfunctions or failures which
were caused by repairs by persons not authorized by Hunter Fan Company, or
Hunter Fan Company
The Care Free®Warm Mist Humidifier
3 Year Limited Warranty

41787 04/28/2006 © 2006 Hunter Fan Company
13
accessories not authorized by Hunter Fan Company, mishandling, modifications, or
damage to the humidifier while in your possession, or unreasonable use, including
failure to provide reasonable and necessary maintenance. This warranty does not cover
humidifiers used in commercial applications. There are no express or implied warranties
as to commercial purchasers or users.
To obtain service, contact the nearest Hunter authorized service center or the Hunter
Fan Company Service Department at 2500 Frisco Avenue, Memphis, Tennessee, 38114
or at [phone]. You will be responsible for insurance and freight or other
transportation to our factory service center. We will return the humidifier, freight
prepaid, to you. The humidifier should be properly packaged to avoid damage in transit
since we will not be responsible for any such damage. Proof of purchase is required
when requesting warranty service. The purchaser must present the sales receipt or
other documentation that establishes proof of purchase.
IN NO EVENT SHALL HUNTER FAN COMPANY BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE HUMIDIFIER. YOUR SOLE REMEDY WILL BE REPAIR OR REPLACEMENT AS PROVIDED
ABOVE.
SOME AMERICAN STATES AND CANADIAN PROVINCES DO NOT ALLOW:
• LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS
• THE EXCLUSION OR LIMITATION OF DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES
• THE EXCLUSION OR INVALIDITY OF EXPRESS OR IMPLIED WARRANTIES IF THE
USER CEASES TO OWN THE HUMIDIFIER
• THE LIMITATION OF REMEDIES AND RECOURSES AVAILABLE TO THE PURCHASER,
OR
• THE INVALIDITY OF AN EXPRESS WARRANTY WHEN A PRODUCT IS
IDENTIFIED BY BRAND NAME IS NOT USED (UNLESS SPECIFIC CONDITIONS ARE
FULFILLED)
SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
ENGLISH

41787 04/28/2006 © 2006 Hunter Fan Company
14
Other Home Comfort Products from Hunter
Hunter Original®QuietFlo™ HEPA Air
Purifier
Programmable
Thermostat
To learn more about Hunter Fan products, visit our web page at:
www.hunterfan.com
HUNTER FAN COMPANY
2500 FRISCO AVENUE
MEMPHIS, TN 38114, USA

41787 04/28/2006 © 2006 Hunter Fan Company
www.hunterfan.com
Humidificador De Niebla
Caliente Care Free®
Modelos 35205, 35207, 36205, 36207
ENGLISH
See page 1
ESPAÑOL
Vea la página 15

41787 04/28/2006 © 2006 Hunter Fan Company
16
LEA Y GUARDE ESTAS INSTRUCCIONES
Gracias por comprar el Humidificador
de niebla caliente Care Free® de
Hunter Fan Company. Lea y guarde
estas instrucciones para obtener el
máximo beneficio y rendimiento de su
humidificador.
Instrucciones importantes de
seguridad: Lea todas las
instrucciones antes de usar este
humidificador.
PRECAUCIÓN: Para evitar un
choque eléctrico o un incendio,
lea todas las instrucciones antes
de usar.
1. Este humidificador de aire no puede
funcionar correctamente en una
superficie irregular. SIEMPRE colóquelo
en una superficie firme, nivelada y
resistente al agua. SIEMPRE colóquelo
al menos a 15 cm (6") de las paredes
y de fuentes de calor como estufas,
radiadores o calentadores.
2. SIEMPRE colóquelo en un área fuera
del alcance de los niños.
3. Antes de usar el humidificador, extienda
el cordón e inspecciónelo buscando
cualquier señal de daños. NO use el
producto si el cordón está dañado.
4. Este producto tiene un enchufe
polarizado (una espiga es más ancha
que la otra) como característica de
seguridad. El enchufe sólo se podrá
introducir en una toma polarizada de
una sola manera. Si el enchufe no
entra completamente en la toma de
corriente, invierta el enchufe. Si todavía
no encaja, contacte con un electricista
calificado. NO trate de inhabilitar o
anular esta característica.
5. SIEMPRE desconecte y vacíe el
humidificador cuando no esté
funcionando o durante su limpieza.
6. NO lo incline ni lo mueva durante
su operación. Nunca mueva el
humidificador mientras haya agua en el
tanque. Vacíe el tanque de agua, apague
la unidad y desconéctela antes de
moverla.
7. Además del mantenimiento de rutina
que puede requerir, este humidificador
requiere limpieza por temporada.
Consulte y siga las instrucciones del
apartado LIMPIEZA DEL HUMIDIFICADOR
Y DEL TANQUE DE AGUA.
8. Esta unidad fue diseñada para utilizar
agua destilada o de la llave. NO agregue
aceites aromatizados, perfumes ni
aditivos con fragancia al agua.
9. NO trate de mover o desensamblar la
base mientras haya agua caliente en la
unidad. Permita un mínimo de quince
(15) minutos de tiempo de enfriamiento
antes de mover o desensamblar la base.
10. SIEMPRE use agua limpia y fresca de la
llave para llenar el tanque de agua.
11. Para evitar el riesgo de choque eléctrico,
NO use cordones de extensión.
12. NO lo opere en exteriores. Este
humidificador solo debe utilizarse en
interiores.
13. NO permita que el agua ingrese en las
tomas de aire en la parte posterior de la
caja, el cordón o el enchufe.
14. NO guarde ni use gasolina ni otro
vapor o líquido inflamable cerca del
humidificador.
15. NO toque superficies calientes.
NO coloque las manos ni la cara
directamente sobre la rejilla de escape
mientras la unidad esté funcionando.
16. NO permita que la rejilla de escape
toque directamente la superficie de una
pared. La niebla directa dirigida a una
pared podría causar daños, en especial
al empapelado.

41787 04/28/2006 © 2006 Hunter Fan Company
17
Ensamblaje De Partes Del Humidificador
El Humidificador de niebla caliente Care
Free® tiene un diseño único y patentado con
varias características innovadoras:
• Cámara Del Hervidor Desmontable – El
calentador puede ser retirado fácilmente
para limpieza y mantenimiento.
• Sistema De Humidificación – El agua
es pasada a través de un elemento
de calefacción que crea una niebla
caliente para humidificar el aire. El agua
estancada en el depósito es eliminada
debido a una cantidad mínima de agua en
el depósito del caldero.
• Propiedades Antimicrobianas
Integradas – Las partes plásticas en
este humidificador tienen propiedades
antimicrobianas integradas para inhibir el
crecimiento de bacterias, moho u hongos
que pueden afectar dichos componentes.
NOTA: Las propiedades antimicrobianas
integradas en este humidificador no se
extienden al agua, aire humidificado o
Cómo Funciona El Humidificador De Niebla
Caliente Care Free®
a los usuarios. Realice la limpieza y el
mantenimiento periódicos según el uso
y las condiciones individuales.
• Sin Polvo Blanco – El Humidificador de
niebla caliente Care Free® no produce
polvo blanco que pueda asentarse en
los muebles o que pueda ser aspirado.
NOTA: Puede notar que se acumulan
depósitos minerales en la base del
tanque o en otros componentes. Esto
es normal y se presenta en condiciones
de utilización estándar. Si desea
eliminar estos depósitos y mantener
el rendimiento del humidificador,
consulte la sección LIMPIEZA DEL
HUMIDIFICADOR Y DEL TANQUE DE
AGUA.
• Apropiado Para Lavaplatos – Todos
los componentes del Humidificador
de niebla caliente Care Free® son
apropiados para lavaplatos, excepto la
base con alimentación eléctrica.
Rejilla De Escape
Taza Medicinal
Tanque De Agua
Base
Tapa Del Tanque
ESPAÑOL

41787 04/28/2006 © 2006 Hunter Fan Company
18
1. Retire el Humidificador de niebla caliente
Care Free® de su paquete.
2. Seleccione una ubicación para su
humidificador. El lugar debe ser plano,
duro, resistente al agua y al menos a 15
cm (6") de distancia de las paredes y las
fuentes de calor. Monte el humidificador
en una bandeja de goteo si está usando
la unidad en una superficie de madera u
otra que pudiera dañarse por el derrame
accidental de agua o por condensación.
HUNTER NO ACEPTARÁ RESPONSABILIDAD
POR DAÑOS DEBIDOS A DERRAME DE
AGUA.
3. Coloque la base en la ubicación
seleccionada. Lleve al tanque de agua a
un fregadero o una bañera para llenarlo
con agua.
4. Voltee el tanque de agua y desenrosque
la tapa del tanque girándola en sentido
antihorario.
NOTA: Cuando el tanque de agua esté vacío,
el icono del indicador de relleno se encenderá
y la unidad se detendrá. Debe presionar el
botón RESTABLECER después de rellenar el
tanque de agua para reactivar la unidad.
5. Reinstale la tapa del tanque enroscándola
en sentido horario al tanque de agua.
Tanque
De
Agua
Base
6. Coloque el tanque de agua nuevamente
en la base. Asegúrese que el tanque de
agua esté adecuadamente asentado en
la base o el humidificador no funcionará
correctamente.
HUNTER NO ACEPTARÁ RESPONSABILIDAD
POR DAÑOS DEBIDOS A DERRAME DE
AGUA.
7. Asegúrese que el botón de encendido
esté en la posición de apagado y conecte
el humidificador en la toma de corriente.
ADVERTENCIA: Nunca conecte el
humidificador mientras sus manos están
mojadas, ya que podría sufrir una descarga
eléctrica.
NOTA: Permita que el humidificador se
asiente un minuto después de rellenar
el tanque, antes que encienda la alimentación
eléctrica.
8. Presione el botón de Encendido para
encender el humidificador. Modifique los
ajustes según sea necesario.

41787 04/28/2006 © 2006 Hunter Fan Company
19
ESPAÑOL
Operación De Su Humidificador
Botones De Funciones
Hay 6 botones que controlan las funciones
del humidificador. Escuchará un pitido de
confirmación al presionar un botón.
1. ENCENDIDO – Presione el botón
de ENCENDIDO para fijar el
humidificador en HI (Alto). Presione
el botón ENCENDIDO otra vez para
apagar la unidad.
a. Cuando se enciende inicialmente
después de ser conectado, el
humidificador emitirá un ‘pitido’ y
todos los iconos en la pantalla se
iluminarán temporalmente. Después
de unos segundos, los iconos LCD
se apagarán y la unidad estará en
modo de espera con la luz de fondo
apagada.
b. Presionando ENCENDIDO una vez
pondrá la unidad en modo HI (Alto)
y encenderá la luz de fondo. La
pantalla LCD mostrará el mensaje
continuo ("CO %") que significa que
la unidad estará permanentemente
en HI (Alto) hasta que se configure
de otra manera. Después de unos
segundos, la pantalla indicará la
humedad actual de la habitación y
la palabra ROOM.
c. Si la unidad está conectada y ha
sido encendida, apagándola y
encendiéndola otra vez hará que se
muestre el último valor usado de
humedad relativa (RH).
d. Cuando la unidad está encendida,
todas las luces de fondo están
encendidas.
2. NIVEL – El Humidificador tiene
dos ajustes: HI (Alto) y LOW (Bajo).
Presione el botón NIVEL y la unidad
alternará entre sus ajustes (HI-LOW-
HI) mientras el icono respectivo está
encendido.
3. ARRIBA – Cada vez que se presiona
el botón ARRIBA, el valor de
humedad relativa RH aumenta en 5
%.
4. ABAJO – Cada vez que se presiona
el botón ABAJO, el valor de humedad
relativa RH disminuye en 5 %.
5. RESTABLECER – Cuando el nivel
de agua es muy bajo, la unidad se
apagará a sí misma. Presionando el
botón RESTABLECER se reactivará la
unidad después que haya llenado el
tanque.
6. NITE GLO™ – Presione el botón
NITE GLO para encender o apagar la
luz de noche azul.
ARRIBA
ABAJO
NIVEL
RESTABLECER
ENCENDIDO
LUZ

41787 04/28/2006 © 2006 Hunter Fan Company
20
Mensajes LCD
1. Control De Niebla: Si la humedad
es mayor que la humedad fijada,
el calentador dejará de crear
niebla y el icono de niebla brillará
intermitentemente. Cuando la
unidad esté en modo de niebla
normal, el icono de niebla estará
iluminado.
2. Indicador Continuo: Cuando la
pantalla LCD muestra el mensaje
CO %, también iluminará el
icono continuo, indicando que el
humidificador está funcionando
continuamente.
3. Advertencia Para Rellenar: Si
el nivel de agua es muy bajo, el
calentador se apagará. El icono de
rellenar destellará para indicar que
el tanque necesita ser rellenado.
Después de rellenar el tanque de
agua, debe presionar el botón
RESTABLECER para reactivar la
unidad.
4. Rango De Ajuste De Humedad: La
humedad puede ser ajustada entre
40 % RH y 85 % RH en incrementos
de 5 %. Si la humedad se fija más
alta que 85 %, la pantalla LCD
mostrará el mensaje CO % RH,
indicando que el humidificador
está configurado para trabajar
continuamente.
5. Rango De Visualización De
Humedad: El rango de visualización
de la humedad o ROOM es de 40 %
a 80 % RH. La pantalla LCD indicará
LO % si la humedad en la habitación
es menor que 40 %. Si la humedad
en la habitación es mayor que 85 %,
la pantalla LCD indicará HI %.
6. Ajuste De La Humedad: Presione
los botones ARRIBA o ABAJO para
cambiar el ajuste de humedad
5 % hacia arriba o hacia abajo,
respectivamente. La pantalla LCD
mostrará el mensaje SET y los
dígitos en la pantalla destellarán
por dos segundos hasta que usted
cambie el ajuste. Luego de ajustar el
nivel de humedad, la pantalla LCD
mostrará la humedad actual en la
habitación y el mensaje ROOM.
1
2
3
4
56
Operación De Su Humidificador