HunterDouglas M25S User manual

English Version 1.0
M25S 24V motor
Instruction for adjusting bottom limit and intermediate position
Venetian Blinds / Duette® / Pleated Blinds

Colophon
This bulletin remains the property of
Hunter Douglas. Its contents are strictly
condential and may not be reprinted,
copied, reproduced or multiplied in
whatever form. It must be returned upon
request by Hunter Douglas.
The information presented in this manual
serves to inform our customers. The
manual is based upon general information
concerning constructions, material
properties and operating procedures as
they are known to us at the moment of
publication. That is why this manual is
subject to change or additions at all times.
Hunter Douglas reserves the right to make
any changes and/or additions deemed
necessary.
Because of the afore-mentioned reasons,
this assembly manual is not a manual for
installation, use or maintenance of products
by Hunter Douglas®. If a user of products
by Hunter Douglas®has any questions
or experiences any difculties during the
use and/or maintenance of such products,
Hunter Douglas should be contacted.
© - 2018 – Hunter Douglas Europe BV
® - Registered Trademark of Hunter Douglas
Printed in the Netherlands
Publication number
11-M-04EN-V10
Release date
19-04-2018

3
Version 1.0M25S 24V Instruction for adjusting limits VB/Duette®/PB
11-M-04EN-V10
ADJUSTING THE BOTTOM LIMIT
ᆰ
Fully lower the blind
ᆱ
Connect key B
ᆲ
Move to new bottom limit
using switch or remote
ᆳ
Remove key B
01-F0721.0
SETTING INTERMEDIATE STOP POSITION
ᆰ
Move blind to desired position
ᆱ
Connect key B
ᆲ
Press “UP” or “DOWN”
on switch or remote
ᆳ
Remove key B
01-F0722.0

4M25S 24V Instruction for adjusting limits VB/Duette®/PBVersion 1.0
11-M-04EN-V10
REMOVING INTERMEDIATE STOP POSITION
ᆰ
Fully raise the blind
ᆱ
Connect key B
ᆲ
Press “UP” or “DOWN”
on switch or remote
ᆳ
Remove key B
01-F0723.0