HunterLab ColorFlex EZ Coffee User manual

ColorFlex®EZ Coffee Quick Start Guide
A60-1016-265 ver 1.1

SETTING UP THE INSTRUMENT STANDARDIZATION
1. Press the DOWN arrow to select
STANDARDIZE from the MAIN
MENU. Press GO to select.
2. Open the standards box and
place the black glass at the
port. Press GO.
3. Place the calibrated instrument
white tile at the port. Press GO.
You are now ready to read
samples.
Now your instrument is ready
for Standardization.
Now your instrument is ready
to Read Samples.
READING SAMPLES
For more detailed instruction on using the instrument, please refer to the ColorFlex EZ Coffee User’s Manual.
Visit www.hunterlab.com for information on all our products.
5. Press DOWN arrow to SAVE the
reading to memory and PRINT
the reading to a USB printer.
1. Select READ from the MAIN MENU
and then press GO.
2. Press the UP/DOWN arrow to select
a setup from the list. Press GO to
continue.
3. Prepare your sample and center
it at the port.
4. Press GO to read and the color
measurement will be displayed.
ABC
1. Connect the AC adapter to
the left port on the back of the
ColorFlex EZ.
2. Plug the power cord into a wall
outlet.
3. If a printer or other USB device is
to be used, plug into one of the
two USB ports on the side of the
ColorFlex EZ.
5. (Optional) Using HunterLab’s
EasyMatch QC software to control
ColorFlex EZ
Connect the USB cable from the rear
Mini-B plugin on the ColorFlex EZ
to a standard USB plugin on the PC.
Load EasyMatch QC on the computer
and connect to the ColorFlex EZ
as a sensor.
4. Turn on the ColorFlex EZ
by pressing GO ( )on the button
pad.
A60-1016-265 ver 1.1
To view the next Coffee score, press
the UP arrow.