Hurricane 736491 User manual

16”/ 20” HIGH VELOCITY
ORBITAL WALL / FLOOR FAN
OWNER’S MANUAL
READ AND SAVE THESE INSTRUCTIONS
Note: Pictures in the manual are for reference only.
Product
#736491 • #736492

CAUTION
Read instructions carefully for safe operation.
SAFETY INFORMATION
WARNING
1. Unplug the fan before moving it or performing maintenance.
2. DO NOT touch the fan when your hands are wet.
3. Those who are not qualified electricians should not disassemble, repair or rebuild the fan.
3. Unplug the fan when it is not in use.
4. DO NOT unplug the fan by holding the power cord. Unplug by holding the plug.
5. DO NOT use the fan when there is damage to the power cord or plug.
6. DO NOT use the fan with extension cord.
7. DO NOT use the fan close to fire.
8. DO NOT insert your hand or other objects into the guard or the movable parts.
9. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed
control device.
10. If the power cord is damaged, it has to be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid hazard.
11. DO NOT use this fan outdoors.
CAUTION
1. Unplug the fan from the outlet and clean it with a soft cloth.
2. DO NOT immerse the fan.
3. Fit the guard onto fan before starting up the fan.
4. This fan is not intended for use by people (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge unless they have
been given supervision or instruction concerning use of the fan by a person responsible
for their safety. Supervise children to ensure they do not play with the fan.
CARE AND MAINTENANCE
Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces. Slightly
moisten a cloth and then wipe off the surfaces of the fan. In order to remove the dust from the
grill, use a vacuum cleaner or remove the front grill by removing the securing screw on the
edge of the grill with a screwdriver. After cleaning, remount the grill. After doing this, fasten the
securing screw on the edge of the grill.
TECHNICAL SPECIFICATIONS
ITEM NO. SIZE VOLTS/Hz CURRENT (A) CFM RPM
736491 16˝ 120V/60Hz .7 3800 1400
736492 20˝ 120V/60Hz .73 4500 1400

ASSEMBLY INSTRUCTIONS
The fan is fully assembled. When you get from the package carton.
OPERATING INSTRUCTIONS
1. Adjust air speed:
Adjust the desired speed by rotating the
switch knob.
2. Adjusting Internal Orbital Oscillation Feature:
The internal orbital oscillation feature can
be turned on by rotating the switch knob to
the side labeled “Orbital Oscillation”. To
disengage the oscillation feature, turn the
switch/knob to the side labeled “Orbital
Oscillation Off”.
ORBITAL FEATURE
The rotor of the fan blade oscillates a full 360º allowing for maximum coverage in your space.
Oribtial Oscillation Off Oribtial Oscillation On
3
0
1
2
3
1
2
0- Stop 1- Low 2- Medium 3- High
Side view Top view

PRODUCT
#736491
#736492
FOR MORE INFORMATION VISIT:
www.hurricane-fans.com
Exclusively distributed by:
SunlightSupply.com
16”/ 20” HIGH VELOCITY
METAL DRUM FAN