HURTLE HURBBB1 User manual
www.PyleUSA.com
2
Before assembling this product and/or giving it to a child, please read all instructions. This guide will walk you
through the functions, usage, and proper care of the Baby Balance Bike. Contact your local dealer or distributor
immediately regarding any defects or damage.
MAINTENANCE
All of the screws, clamps, and other hardware and plastic parts on the
Baby Balance Bike should be inspected periodically to ensure that
they are secured properly and not damaged or malfunctioning.
1. The Baby Balance Bike can be cleaned using mild household soap or
detergent and warm water on a sponge or clean cloth.
Always allow to completely air dry before using the balance bike.
2. Lubricate the axle and rotating parts regularly, it will expand the
product lifespan.
3. Please regularly check and make sure the screws are not loose and
components are not damaged. Remember to replace damaged screws
and components.
4. If you need to dismount the bike for transportation or storage, please
make reference to manual instruction and use anti-shock materials to
protect it.
www.PyleUSA.com 3
WARNINGS
To make sure children safe driving, please follow below safety warnings and precautions:
1. Children riding the bicycle should have constant adult supervision. A responsible adult must inspect the bicycle
prior to use, to ensure that all parts are fully assembled and tightened to prevent accidents.
2. Always wear proper protective gear such as a helmet, elbow and kneepads as well as appropriate clothing such as
a long sleeve shirt, gloves, long pants and closed footwear. DO NOT ride barefoot or in sandals.
3. The Baby Balance Bike is suitable for children 10-24 months.
4. Keep away from re.
5. ln order to avoid suocation, please keep the plastic cover (tape) away from the baby.
6. DO NOT place any load on the Baby Balance Bike, otherwise it will aect the stability of the Balance Bike.
7. DO NOT use the Baby Balance Bike near stairs, thresholds, and steps. NEVER play near heaters and stoves.
The use of the bicycle is forbidden on roads used by vehicles and on all public roadways in general.
9. Ride the bicycle only on at and level ground. DO NOT ride the bicycle on slopes.
DO NOT go down a long descending slope or hill. Please be careful when passing these areas.
10. The child shouldn't spend more than one hour each time in a continuous ride, the maximum load of the bike is
60 lbs. NEVER allow more than one child to ride on the bicycle at any time.
11. Adult assembly is required for this product.
WARNINGS
To make sure children safe driving, please follow below safety warnings and precautions:
1. Children riding the bicycle should have constant adult supervision. A responsible adult must inspect the bicycle
prior to use, to ensure that all parts are fully assembled and tightened to prevent accidents.
2. Always wear proper protective gear such as a helmet, elbow and kneepads as well as appropriate clothing such as
a long sleeve shirt, gloves, long pants and closed footwear. DO NOT ride barefoot or in sandals.
3. The Baby Balance Bike is suitable for children 10-24 months.
4. Keep away from re.
5. ln order to avoid suocation, please keep the plastic cover (tape) away from the baby.
6. DO NOT place any load on the Baby Balance Bike, otherwise it will aect the stability of the Balance Bike.
7. DO NOT use the Baby Balance Bike near stairs, thresholds, and steps. NEVER play near heaters and stoves.
The use of the bicycle is forbidden on roads used by vehicles and on all public roadways in general.
9. Ride the bicycle only on at and level ground. DO NOT ride the bicycle on slopes.
DO NOT go down a long descending slope or hill. Please be careful when passing these areas.
10. The child shouldn't spend more than one hour each time in a continuous ride, the maximum load of the bike is
60 lbs. NEVER allow more than one child to ride on the bicycle at any time.
11. Adult assembly is required for this product.
www.PyleUSA.com
4
BABY BALANCE BIKE ASSEMBLY CONTENTS
ASSEMBLY INSTRUCTIONS
Caution
This bike must be assembled by adult to make sure it’s assembled in the correct manner before using.
Step 1: Inset the front wheel set 2to the hole of bike frame 1. See Pic. 1
Step 2: Insert the handlebar 3into the front wheel set, then use wrench and screws to x them together.
See Pic. 2 and Pic. 3.
1 2 3 4 5
Bike Frame Front wheel set Handlebar Screw and nut Wrench
Pic 1 Pic 2 Pic 3
www.PyleUSA.com 5
Features:
•For 10 Month to 24 Month Kids
•Fully and Widen Rubber Wheels assure Baby Feet Safety
•135° Steering Limitation Avoid Baby Falling
•Four EX-Big Wheels oer a Smooth and Easy Ride/Walk For Infants
•Dierent Styles for Boys and Girls
•Carbon Steel Frame and Non-Slid EVA Handle
•Softy Supportive Seat
•Easy to Assemble
•Small Toys easily Put in Car or Trunk and Play Everywhere
•Perfect Gift for Christmas or First Birthday
•Perfect Toys for Kids Learn to Walk or Ride
•Non-Toxic and BPA Free
What's in the Box:
•Baby Balance Bike
Technical Specs:
•Construction Materials: Carbon Steel
•Recommended Age: 10-24 Months
•Weight Capacity: 60 lbs.
•Product Dimensions: 20'' x 7'' x 14'' -inches
HURBBB1 HURBBZ2 HURBBG3 HURBBU4
Questions? Issues?
We are here to help!
Email: cs@hurtleusa.com
This manual suits for next models
3
Table of contents
