Husky HOTC5623BB2S User manual

THANK YOU
USE AND CARE GUIDE
56 IN. 23-DRAWER HEAVY DUTY TOOL CHEST AND
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
HUSKYTOOLS.COM
We appreciate the trust and confidence you have placed in Husky through the purchase of this chest/cabinet. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Husky!
CABINET SET- TEXTURED BLACK MATTE FINISH
Model #HOTC5623BB2S
SKU# 1002 877 771
1-888-HD-HUSKY
8 a.m - 7 p.m., EST, Monday-Friday,
9 a.m. - 6 p.m., EST, Saturday
THD.com# 1002 812 663

2
Table of Contents
Table of Contents.....................................................................2
Safety Information...................................................................2-3
Warranty.......................................................................................3
Pre-Assembly............................................................................4
Assembly............................................................................6
Operation...........................................................................8
Maintenance.....................................................................9
Safety Information
7. When moving this product, push it rather than pull it.
8. Do not alter this product including power strip and LED working light
DANGER: Do not stand on this product. You
may fall or cause the product to tip.
DANGER: Do not move the product prior to closing
and locking all the drawers. The drawers could come
open and make the product unstable and tip.
DANGER: Do not mount this product on a
truck bed or any other moving object.
WARNING: Keep the product on a level
surface. The product may become unstable and
tip if stored or moved on an uneven surface.
WARNING: Be careful when closing the cover.
Remove hands before closing the cover.
CAUTION: Do not lift this product directly
with a forklift or tow with any mechanical devices.
CAUTION: Do not exceed the maximum product
weight, including contents. Do not exceed the
maximum weight for each drawer.
See Specifications on page 4.
CAUTION: Only transport this product when
empty. Properly secure when transporting.
1. Do not open more than one drawer at a time.
2. Do not let children approach the tool chest / cabinet, power strip
5. Lock both the lid and all drawers before moving
the cabinet / chest.
3. To help prevent the product from tipping, load the product
starting with the bottom drawers.
6. Do not step in any drawer / drawers.
4. Keep the locking casters brake set unless you are
moving the cabinet. This will help to prevent the product
from rolling.
Care and Cleaning..........................................................9
Service Parts....................................................................10
Tools Required...........................................................................4
Hardware Included....................................................................4
Specifications............................................................................4
Package Contents......................................................................5
Plug and Outlet Safety
WARNING: This product is for use on a nominal 120-volt circuit
outlet. Never modify the plug in any way. Do not use any adapter plugs
with earth (grounded) chest/cabinet power strips. Unmodified plugs
and matching outlets will reduce risk of electric shock.
WARNING: Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There is increased
risk of electric shock if your body is earthed or grounded.
WARNING: Chests/cabinets marked “Grounding Required” have a
power strip with a three wire cord and three prong grounding plug. The
plug must be connected to a properly grounded outlet (See Figure).
If the power strip should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away
from the user, reducing the risk of electric shock. The grounding
prong in the plug is connected through the green wire inside the
cord to the grounding system in the power strip. The green wire in
the cord must be the only wire connected to the
power strip's grounding system and must
ever be attached to an electrically “live”
terminal. Your power strip must be plugged into
an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances.
in any manner.
and LED working light.
WARNING:Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
and has a grounding plug. Chest/cabinet plugs must match the
WARNING: Unplug from outlet when not in
use, and before putting on or taking off parts.
WARNING: Keep the cord away from heated
surfaces.

Warranty
The manufacturer warrants the product to be free from defects in materials and workmanship for a period of five (5) years from date of
purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If this product is
found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the
manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration
neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in
any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product
as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the products such as surface and/or weathering, as this is
considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential
or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-888-HD-HUSKY or visit www.huskytools.com.
3
HUSKYTOOLS.COM
Safety Information (continued)
LED Working Light Safety
WARNING: Do not use outdoors.
WARNING: The chest-cabinet is intended for household
use.
WARNING: For loading always put heavier items at the
bottom and not near the top in order to help prevent the
possibility of the chest-cabinet tipping over.
DANGER: To reduce the risk of electric shock, always
unplug this chest-cabinet from the electrical outlet before
cleaning.
WARNING This product contains Li-ion battery. Use only :
the supplied USB charging cable and connect only to a
suitable power outlet (DC 5V/2A).
CAUTION This working light is designed for indoor use :
only. Do not use it in humid environments (like in a bathroom
or outdoors). Otherwise the components inside may short-
circuit and result in accidents.
WARNING Do not allow the product to fall from high :
places.
Pleas e contac t 1-888-HD-HUSK Y fo r furthe r assistance .
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician
for help.
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The Responsible party information:
Clearwater Metal Vn JSC
Lot CN2, Mai Trung IZ, An Tay Village, Ben Cat Town, Binh
Duong Province, Vietnam. Tel: [phone]
Product name: Power strip 8 outlets with 2 USB ports
Model# K2415010

Pre-assembly
4
TOOLS REQUIRED
Phillips
screwdriver
Safety
goggles
10 mm
Wrench
13 mm
Wrench
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
BB
CC
dd
DD
Part Description Quantity
AA Bolt M6x15L 4
BB Washer M8 24
CC 24
DD
Bolt M8x15L
8 Screw M4x10L
SPECIFICATIONS
Maximum capacity (chest drawer) 1200 lbs.
Maximum capacity (cabinet drawer) 1800 lbs.
Empty weight 623.9 lbs.
NOTE: Begin product assembly close to the final
intended location of your chest/cabinet. This
product is heavy and may be difficult to move
after assembly.
dd
EE
EE 1 10 mm/13 mm wrench

Pre-assembly (continued)
PACKAGE CONTENTS
5
Part Description Quantity
A Gas lift 2
B Top chest 1
C Bracket 2
D Side handle 1
E Rolling cabinet 1
F Swivel caster with brake 4
G Drawer slide (pair) 25
Part Description Quantity
H Regular caster 2
I Drawer 18
J Lock 2
K Key (set) 2
L Husky badge 2
M Drawer Liner 24
N 8-outlet power strip 1
O Portable LED work light 1
C
F
B
G
A
D
E
H
I
M
HUSKYTOOLS.COM
F
K
L
J
N
O
Pleas e contac t 1-888-HD-HUSK Y fo r furthe r assistance .

Assembly
1
Attaching the side handle 2 Installing the casters
□ Attach the side handle (D) to the rolling cabinet (E)
using four bolts (AA).
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
Ensure all cabinet drawers are securely locked into
□ Lay the rolling cabinet (E) on its back. Use the
packaging material to protect the finish.
□ Mount the four swivel casters with brake (F) to the
rolling cabinet (E) using four bolts (CC) and washers
(BB) per caster. The swivel casters with brake (F)
□ Mount the two regular casters (H) to the center
of the rolling cabinet (E) using four bolts (CC) and
□ Tighten all bolts with a wrench.
□ Return the rolling cabinet (E) to its upright position.
CAUTION: Do not over tighten the screws.
3
Placing the chest
□ Place the top chest (B) on top of the rolling cabinet (E).
NOTE: Two people may be required to complete
this step.
□
place using the key lock on the rolling cabinet (E).
4
Installing the brackets
□ Attach the brackets (C) to the back of the
cabinet (E). Place the brackets over the holes and
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
□ Tighten all screws securely with a screwdriver.
DD C
product to secure the top chest (B) to the rolling
6
should be installed on each end at the cabinet.
washers (BB) per caster.
B
E
secure with four screws (DD) per bracket.
D
E
AA
E
F
BB
CC
B
E

Assembly (continued)
5
Installing the drawer liner
□ Place the drawer liners (M) in appropriately sized drawers
and the chest lid area to protect the surface.
7
M
HUSKYTOOLS.COM
Pleas e contac t 1-888-HD-HUSK Y fo r furthe r assistance .

Operation
Installing the drawers
□ Pull the slides and slide carrier out until fully extended.
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
Slightly insert one side and repeat for the other side.
3
2Removing the drawers
□ Fully extend and empty the drawer.
□ Depending on the slide, either lift or lower the
release lever on both sides so the slides can ride over
the stops. Pull out to remove.
1 Locking and unlocking the unit
IMPORTANT : The drawers must be fully closed before
locking / unlocking the unit.
□ Insert the key (K) and turn it fully to the left to lock.
□ Remove the key (K).
□ Insert the key (K) and turn it fully to the right to unlock.
□ Remove the key (K).
8
K
Installing the LED work light
4
O
□ Place the magnetic LED work light (O) on tool chest for
extra light. Recharge by plugging it into a power source which
can provide DC 5V/2A current.
□ Press the button on the LED light to turn the light on full
illumination. Press it for second time to adjust to half
illumination. Press a third time to turn the light off.
□ When the light is not plugged in, there is an additional flash
□ During a power failure, the light automatically turns on to half
illumination for 30 minutes and then automatically shuts off.
You can also press the button to switch between lighting modes.
(S.O.S.) light mode.

Maintenance
1
Maintaining the casters 2 Maintaining the drawers
□ Grease the casters annually using high quality
bearing grease.
9
□ Periodically clean the drawer trim, and
inside the drawers with a mild detergent and water.
□ Remove grease and oil with a standard,
nonflammable cleaning fluid.
□ The use of drawer liners is recommended to protect
the finish inside the drawers and make the drawers
easier to clean. Drawer liners can be purchased at
The Home Depot and can be cleaned with soap
□ Lubricate the slides semi-annually with grease or
equivalent.
□
This steel product has been coated with industrial powder coating
Care and Cleaning
□
To help protect the powder coated finish, do not allow harsh
□
Use a glass cleaner (Windex or equivalent product) to clean and
chemicals (oil, grease, or other chemical) to remain on the powder
R
and water.
for a durable finish.
coating surface.
maintain all surfaces of powder coating.
HUSKYTOOLS.COM
Pleas e contac t 1-888-HD-HUSK Y fo r furthe r assistance .

Service Parts
10
Part Description Quantity
A Gas lift 2
C Bracket 2
D Side handle 1
F Swivel caster with brake 4
G Drawer slide (pair) 25
H Regular caster 2
J Lock 2
K Key (set) 2
M Drawer Liner 24
N 8-outlet power strip 1
O Portable LED working light 1
C
F
G
A
D
H
M
F
K
J
N
O

Questions, problems, missing parts? Before returning to the store, call
Husky Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
Retain this manual for future use.