Operation controls and functions
Rear Panel
Specifications
N P
OUTPUT
V S
INPUT
V-OUT S-OUT V-IN S-IN DC 9V 500mA
1
2 3 4 5 6 7
1. Output system select switch:
Set the switch to the type of signal you wish to output.
N,P stand for output signals of PAL, NTSC 3.58, respectively.
2. Video output.
3. S-Video output.
4. Input signal select switch: Set the switch to select V-In or S-In.
5. Video Input.
6. S-Video Input.
7. DC power supply input.
Input Systems
Output TV Systems
Connection Terminals
Sampling Frequency
Digital Code Bit
Line
Field
Power
Dimensions(mm)
Weight(g)
Accessory
NTSC, N4, PAL, PAL M, PAL N, SECAM Output TV Systems
NTSC 3.58, PAL Sampling Frequency
Video input: 1 S input : 1
Video output: 1 S output: 1
Y: 13.5 MHz
R-Y: 6.75 MHz
B-Y: 6.75 MHz
R: 8 bits
G: 8 bits
B: 8 bits
525 625
60 50
DC9V 500mA
236(W) x 130(D) x 45(H)
400
One set of video cable, AC adaptor
Built-in Color bar.
Input auto detecting.
Digital conversion from input TV signals of NTSC, N4, PAL, PAL M, PAL N, SECAM
to output signals of NTSC, PAL.
Digital line (525 625 lines) and field (60 input 50 field) conversion.
6M bit field memory.
Precautions
Features
Operation controls and functions
Front Panel
S-IN
INPUT
SELECT V-IN SECAM PAL PM PN
INPUT SYSTEM
N4 N3 PAL NTSC
OUTPUT
SYSTEM
12 3 456 7 89 10
1. Do not expose this product to directsunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy object on top of the converter.
6. Put the unit in an open space that has a good ventilation.
7. If the picture is affected. Keep the unit away from TV or other electronic equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period of time.
1. Illuminates when S-IN is selected.
2. Illuminates when V-IN is selected.
3. Illuminates when input system is SECAM.
4. Illuminates when input system is PAL.
5. Illuminates when input is PAL M.
6. Illuminates when input is PAL N.
7. Illuminates when input is NTSC 4.43.
8. Illuminates when input is NTSC 3.58.
9. Illuminates when output system is PAL.
10. Illuminates when output system is NTSC.
When no signal is selected, led 3~led 8 will illuminate in sequence, and the unit will
output a color bar pattern.
Multisystem
Video
Converter
From NTSC 358, NTSC 4.43, PAL, PAL M, PAL N,
SECAM To NTSC 3.58, PAL
