Hydro Tek The Living Room User manual

Assembly Instruction
Guide

Box Contents
Your Living Room grow tent will contain the following items:
4 x Pole 1(A)
4 x Pole 2(A)
4 x Pole 3(8)
4 x Pole 4(()
1 x Equipment Support Arm S(E)
2 x Equipment Support Arm 6(F) 8
x 3-point Frame Connectors
1 x Tent Material
1 x Floor Splash Tray
ASSEMBLY DIAGRAM 1
X8
3

1
2
3
4
5

Installation
Unfold the tent material and place reflective side face up.
Position the frame into the tent base.
a. The tent base should be a firm fit. Ensure the base and the corners are taut before proceeding
to the next step.
Pull the grow tent outer canvas over the constructed framework and carefully fit it onto the frame top.
See Assembly Diagram 3.
a. The tent top should be a firm fit. Ensure the top and the corners are taut before proceeding
to the next step.
9
Zip the tent shut by sliding the top and bottom zippers in parallel until they meet.
10
Double check the corner frame connectors are properly positioned, and the tent material is taut.
11
Insert the splash tray in the bottom of the tent as shown on Assembly Diagram 3.
ASSEMBLY DIAGRAM 3
Splash Tray

SIZE
POLE
DIAMETER
(1mm Thick)
EQUIPMENT
SUPPORT
ARMS
MAX HANGING
WEIGHT PER
SUPPORT
FLOOR
SPLASH
TRAY
WEIGHT
MODEL
NUMBER
2’ x 2’ x 6.5’
24” x 24” x 80”
60 x 60 x 200 cm
25mm
1.00”
4
10kg
22lbs
Included
8kg
18lbs
147002
2’ x 4’ x 6.5’
24” x 48” x 80”
60 x 120 x 200cm
25mm
1.00”
4
10kg
22lbs
Included
11kg
24lbs
147024
3’ x 3’ x 6.5’
36” x 36” x 80”
90 x 90 x 200 cm
25mm
1.00”
4
10kg
22lbs
Included
11kg
24lbs
147003
4’ x 4’ x 6.5’
48” x 48” x 80”
120 x 120 x 200cm
25mm
1.00”
4
15kg
33lbs
Included
14kg
31lbs
147004
5’ x 5’ x 6.5’
60” x 60” x 80”
150 x 150 x 200cm
25mm
1.00”
4
19kg
42lbs
Included
18kg
40lbs
147005