HYPER TOY COMPANY DRIFTKING3 User manual

This device complies with RSS210 of Industry Canada.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.

Push up/pull back the left control
lever to move the remote contorl
car forward/backward; push
up/pull back the left control lever
continuously, then remote control
car will move forward/backward
continuously.
Push the right control lever to the
left, then remote control car will
drift to the left; push the right
control lever to the left continu-
ously, then the remote control car
will drift to the left continuously.

Push the right control lever to the
right, then remote control car will
drift to the right; push the right
control lever to the right continu-
ously, then the remote control car
will drift to the right continuously.
Push the right control lever to the
left, then remote control car will
rotate in its originalplace in the
counter-clockwise direction, push
the right control lever to the left
continuously, then the remote
control car will rotate in its original
place in the counter-clockwise
direction continuously.
Push the right control lever to the
right, then the remote control car
will rotate in its original place in
the clockwise direction; push the
right control lever to the right
continuously, then the remote
control car will rotate in its original
place in the clockwise direction
continuously.

Push the left control lever up and
the right control lever to the left,
and then the remote control car
will move forward and to its left.
Push the left control level up and
the right control level to the right,
and then the remote control
vehicle will move forward and to
its right.
Pull the left control lever down
and the right control lever to the
left, and then the remote control
car will move backward and to its
left.

Pull the left control lever down
and the right control lever to the
right, and then the remote control
car will move backward and to its
right.