Hyperion USB 3.0 4-Port PCI Express Card User manual

User’s Manual
USB 3.0 4-Port PCI Express Card

ABOUT THIS MANUAL
This manual is designed for use with the External USB 3.0 4-Port PCI
Express Card. Information in this document has been carefully checked for
accuracy; however, no guarantee is given to the correctness of the contents.
The information in this document is subject to change without notice. The
manufacturer does not make any representations or warranties (implied or
otherwise) regarding the accuracy and completeness of this document and
shall in no event be liable for any loss of profit or any commercial damage,
including but not limited to special, incidental, consequential, or other
damage.
SAFETY INSTRUCTIONS
Always read the safety instructions carefully:
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.
If any of the following situations arises, get the equipment checked by a
service technician:
The equipment has been exposed to moisture.
The equipment has been dropped and damaged.
The equipment has obvious sign of breakage.
The equipment has not been working well or you cannot get it to work
according to the User’s Manual.
COPYRIGHT
This document contains proprietary information protected by copyright. All
right are reserved. No part of this manual may be reproduced by any
mechanical, electronic or other means, in any form, without prior written
permission of the manufacturer.
1

Table of Contents
1. Introduction ................................................................................................................... 3
Features........................................................................................................................... 4
Package Contents ........................................................................................................... 4
System Requirements...................................................................................................... 4
2. Installation ..................................................................................................................... 5
A. Hardware Installation................................................................................................... 5
B. Driver Installation.........................................................................................................6
3. Installation Verification............................................................................................... 21
4. Driver Unistallation...................................................................................................... 22
5. Trouble Shooting......................................................................................................... 25
6. Specifications.............................................................................................................. 26
7. Regulatory Compliance .............................................................................................. 27
FCC Conditions .............................................................................................................27
CE.................................................................................................................................. 27
WEEE Information.........................................................................................................27
2

1. Introduction
The USB 3.0 4-Port PCI Express Card is compliant to USB 3.0 Standards and
backward compatible with USB 2.0 devices. It also allows you to connect
multiple peripherals to your PC at the same time. The USB 3.0 4 Port PCI
Express Card enhances the performance of transmission that excessively faster
than existing USB 2.0 devices. It is the ideal interface for transferring extremely
large amounts of data from UBS 2.0/3.0 compliant products such real-time video
cameras, portable devices and others.
3

Features
Add 4 ports to USB 3.0 devices.
Install easily into any PCI Express slot.
Supports USB 3.0 transfer rate.
Support ATX Power.
Package Contents
USB 3.0 PCI Express Card x1
CD( Driver and User’s Manual) x1
QuickInstallationGuide x1
System Requirements
Windows-based (WindowsXP, Windows Vista, Windows7) computer
with available PCI express slot.
Windows-based server.
Notice: Mac systems do not support this USB 3.0 4 ports PCI Express Card
4

2. Installation
A. Hardware Installation
USB 3.0 Ports
4-pin Power Connector
1. Turn your computer off and any peripherals connected to the computer.
Unplug the power cable before installing the host card.
2. Remove the cover from the computer case.
3. Locate an available PCI Express slot and remove the bracket cover.
4. Insert the card into the open PCI Express slot and fasten the bracket to the
rear of the case.
5. Connect 4P power cable from the computer’s power supply to the card.
6. Place the cover back onto the computer.
7. Insert the power cable into the socket on the power supply.
5

B. Driver Installation
On Windows®7
To Install the Driver:
1. Insert the provided CD into CD-Rom locates and double-click the Setup.exe
file.
2. Preparing to install, please wait.
6

3. The Install Wizard will install VIA XHCI Host Controller Software Setup
Wizard Setup Wizard on your computer. To continue, click Next.
4. To choose the components, the Setup will install them. Please click Next to
install the driver.
7

5. The Windows Security will show up, please click Install this driver
software anyway.
6. Setup has enough information to start installing the components. If you want
to review or change any settings, click Back. It you are satisfied with the
settings, click Next to begin installing components.
7. The Windows Security will show up, please click Install this driver
software anyway.
8

8. The install Wizard has successfully installed VIA XHCI Host Controller
Software Setup Wizard. Click Finish to exit the wizard.
*Actual strings depend on your operation system. These screen shots are from Windows

7 and might
vary slightly for each operation system.
9

On Windows Vista®
To Install the Driver:
1. It is normal situation when the following window appears. Please click
Cancel.
2. Insert the provided CD into CD-Rom locates and double-click the Setup.exe
file.
10

3. When the following screen show up, please click Next to install the Driver.
4. The Install Wizard will install VIA XHCI Host Controller Software Setup
Wizard on your computer. To continue, click Next.
11

5. Please read the following license agreement and click I Agree and click
Next.
6. To choose the components, the Setup will install them. Please click Next
to install the driver.
12

7. Setup has enough information to start installing the components. If you
want to review or change any settings, click Back. It you are satisfied with
the settings, click Next to begin installing components.
8. The Windows Security will show up, please click Install this driver
software anyway.
13

9. Please click Next to install the driver.
10. The Install Wizard has successfully installed VIA XHCI Host controller
Software Setup Wizard. Click Finish to exit the wizard.
*Actual strings depend on your operation system. These screen shots are from Windows

Vista and
might vary slightly for each operation system.
14

On Windows®XP
To Install the Driver:
1. It is normal situation when the following window appears. Please click
Cancel.
2. The Install Wizard will install VIA XHCI Host Controller Software Setup
Wizard on your computer. To continue, click Next.
15

3. Please read the following license agreement and click I Agree and click
Next.
4. To choose the components, the Setup will install them. Please click Next
to install the driver.
16

5. Setup has enough information to start installing the components. If you
want to review or change any settings, click Back. It you are satisfied with
the settings, click Next to begin installing components.
6. When the Hardware Installation window appears, please click Continue
Anyway. Furthermore, when Found New Hardware appears, please click
Cancel.
17

7. Please click Next to install the driver.
18

8. The Install Wizard has successfully installed VIA XHCI Host controller
Software Setup Wizard. Click Finish to exit the wizard.
19