Hyster H28XD-CH Series Quick start guide

WWW.HYSTER.COM
PRODUCT TECHNICAL GUIDE
CONTAINER HANDLER
H28XD-CH & H32XD-CH series

2
TRUCK DIMENSIONS
c
+/- 210
m1m2
α~β~
l
x y
l2
l
1
h10
h6h1
h3.1.2
h3.1.1
h4
h7
Q
a/2 a/2
a/2
a/2
V
Ast
A
st
V
r1
Wa
r2
r2
I.T.R.
b2
b3
b13
b10 b11
= Centre of gravity of unladen truck
AST = Wa+ x + l6+ a (if b12/2 < b13)
AST = Wa+ ((l6+x)^2+ (b12/2-b13)^0.5 + a (if b12/2 > b13 and Wa > b13+ b12/2)
AST = b13 + b12/2 ((l6+x)^2+ (b12/2-b13)^0.5 + a (if b12/2 > b13 and Wa < b13+ b12/2)
a = Minimum operating clearance = 10% of AST
(VDI standard = 200 mm BITA recommendation = 300 mm)
l6= load lengths
b12 = load width

3
H28XD-CH / H32XD-CH SPECIFICATIONS
(1) Centre of drive axle to front face of spreader
(2) Weights are based on the following specifications: Complete truck with cab, pneumatic
tyres, mast as specified, carriage as specified and 20’ – 40’ spreader.
(3) Unladen with new tyres
(4) Spreader, distance from ground to twistlocks.
(5) Full suspension seat in depressed position
(6) Distance centre truck to centre of internal turning radius
(7) Travel speed laden/unladen limited at 25 km/h as factory default
(8) Gradeability figures are provided for comparison of tractive performance,
but are not intended to endorse the operation of vehicle on the stated inclines.
Follow instructions in the operating manual regarding operation on inclines.
GENERAL
1.1 Manufacturer HYSTER
1.2 Model designation H28XD-CH H32XD-CH
1.3 Powertrain / drivetrain Diesel
1.4 Operator type Seat
1.5 Rated capacity / rated load Q kg 26,400 24,120 31,000 28,200
1.6 Load centre distance c mm 1,220 / 1,430
1.8 Load distance (1) x mm 957
1.9 Wheelbase y mm 4,315 4,825
1.10.1 Container Stacking Height 9ft 6" 2 high
1.10.2 Container Stacking Height 8ft 6" 2 high
WEIGHT
2.1 Service weight (2) kg 51,553 51,806
2.2 Axle loading, laden front / rear kg 72,084 5,869 77,054 5,752
2.3 Axle loading, unladen front / rear kg 32,365 19,188 32,067 19,739
WHEELS
3.1 Tyres: L = Pneumatic, V = solid, SE = Pneumatic Shape Solid Pneumatic
3.2 Tyres size, front 16.00 - 25 32PR
3.3 Tyres size, rear 16.00 - 25 32PR
3.5 Wheels, number front / rear (x = driven wheels) x 4 / 2
3.6 Track width, front b10 mm 2,424
3.7 Track width, rear b11 mm 2,338
DIMENSIONS
4.1 Mast tilt : forward / backwards α/β deg 6 / 10
4.2 Height of mast lowered (unloaded) (3) h1mm 5,659
4.3 Free lift h2mm 0
4.4 Lift h3mm 6,115
4.4.1 Spreader distance from ground to twistlocks min./max (4) h13 mm 1,257 / 7,372
4.5 Height of mast extended (unloaded) h4mm 8,716
4.7 Height of overhead guard (open cab) h6mm 3,495
4.7.1 Height of overhead guard (closed cab) h6mm 3,522
4.7.2 Height of overhead guard (closed cab w/ airco) h6mm 3,522
4.7.3 Height of overhead guard (closed cab w/ strobe light) h6mm 3,619
4.7.4 Height of overhead guard (closed cab w/ work lights) h6mm 3,671
4.7.5 Height of overhead guard (closed cab w/ airco & strobe light) h6mm 3,649
4.8 Seat height (Seat Index Point, ISO 5353) (5) h7mm 2,292
4.12 Coupling height h10 mm 1,031
4.19 Overall length l1mm 8,747 9,257
4.20 Length to face of forks l2mm 6,309 6,819
4.21 Overall width truck b2mm 3,340
4.23 Carriage type Dedicated carriage for ISO top lift spreader
4.24 Carriage width b3mm 3,390
4.31 Ground clearance, under mast (w/o load) m1mm 227
4.32 Ground clearance, centre of wheelbase m2mm 502
4.33.1 Load size w x l mm 20 ft x 9ft 6"
4.34.1.1 Load size Ast mm 10,569 11,267
4.34.1.2 Aisle width (a=10%) Ast mm 9,608 10,243
4.34.1.3 Aisle width (a=0) Ast mm 9,808 10,443
4.33.2 Aisle width (a=200 mm) w x l mm 40 ft x 9ft 6”
4.34.2.1 Aisle width (a=10%) Ast mm 14,981 15,120
4.34.2.2 Aisle width (a=0) Ast mm 13,619 13,745
4.34.2.3 Aisle width (a=200 mm) 13,819 13,945
4.35 Outside turning radius Wamm 6,185 6,848
4.36 Internal turning radius (6) b13 mm 2,589 3,013
PERFORMANCE
5.1 Travel speed laden/unladen T3 (7) km/h 25 / 25
5.2 Lifting speed laden/unladen 90cc T3 m/s 0.27 / 0.29
5.3 Lowering speed laden/unladen m/s 0.50 / 0.50
5.5 Drawbar pull laden/unladen @ 1.6 km/hour T3 kN 196 / 201 195 / 201
5.6 Drawbar pull laden/unladen @ stall T3 kN 239 / 244 238 / 243
5.7 Gradeability laden/unladen @ 1.6 km/hour T3 (8) %27 / 42 25 / 42
5.8 Gradeability laden/unladen @ stall T3 (8) %33 / 42 31 / 42
SPREADER
9.1 Manufacturer / type ELME 812
9.2 Design Top lift spreader
9.3 Size of containers feet ´ 20' & 40'
9.4 Side shift b8mm +/- 217
9.5 Pile slope spreader ° / type deg +/- 3.0 / mechanical
9.6 Rotation ° deg +/- 4,5
9.7 Longitudinal adjustment mm +/- 210
9.8 Telescoping time, extend / retract s 12 / 12

4
MAST AND CAPACITY INFORMATION - 28-32T
NOTICE:
Care must be exercised when handling elevated loads. Operators must be trained and
must read, understand and follow the instructions contained in the Operating Manual.
All values are nominal values and they are subject to tolerances.
For further information, please contact the manufacturer.
Hyster products are subject to change without notice.
Lift trucks illustrated may feature optional equipment.
Values may vary with alternative configurations.
Specification data is based on VDI 2198.
CERTIFICATION: Hyster lift trucks meet the design and construction requirements of B56.1-1969,
per OSHA Section 1910.178(a)(2), and also comply with the B56.1 revision in effect at time of
manufacture. Certification of compliance with the applicable ANSI standards appears on the
lift truck. Performance specifications are for a truck equipped as described under Standard
Equipment on this Technical Guide. Performance specifications are affected by the condition
of the vehicle and how it is equipped, as well as by the nature, condition of the operating area,
proper service and maintenance of the vehicle. If these specifications are critical, the proposed
application should be discussed with your dealer.
NOTE: Specifications, unless otherwise listed, are for a standard truck without optional equipment.
H28XD-CH
H32XD-CH
Stacking
height
Lift height
h3
(mm)
Min.
under
twistlock
h3.1.1
(mm)
Max.
under
twistlock
h3.1.2
Lowered
height
h1
Extended
height
h4
(mm)
Side
shift
b8
(mm)
Tilt
fwd/bwd
(°)
Overall
width
b2
(mm)
Capacity spreader
retracted
Capacity spreader
extended
c1@ 1.430 mm c1@ 1.640 mm
(kg)
2 STAGE
NFL
2 high 8’6” 6,115 1,239 7, 3 5 4 5,659 8,716 +/- 216 6/10 3,340 26,400 24,120
2 high 9’6” 6,115 1,239 7, 3 5 4 5,659 8,716 +/- 216 6/10 3,340 26,400 24,120
3 high 9’6” 9,145 1,239 10,384 7,174 11,746 +/- 216 6/10 3,340 26,300 23,680
4 high 8’6” 9,755 1,239 10,994 7,4 79 12,356 +/- 216 6/10 3,340 25,740 23,380
Stacking
height
Lift height
h3
(mm)
Min.
under
twistlock
h3.1.1
(mm)
Max.
under
twistlock
h3.1.2
Lowered
height
h1
Extended
height
h4
(mm)
Side
shift
b8
(mm)
Tilt
fwd/bwd
(°)
Overall
width
b2
(mm)
Capacity spreader
retracted
Capacity spreader
extended
c1@ 1.430 mm c1@ 1.640 mm
(kg)
2 STAGE
NFL
2 high 8’6” 6,115 1,239 7, 3 5 4 5,659 8,716 +/- 216 6/10 3,340 31,000 28,200
2 high 9’6” 6,115 1,239 7, 3 5 4 5,659 8,716 +/- 216 6/10 3,340 31,000 28,200
3 high 9’6” 9,145 1,239 10,384 7,174 11,746 +/- 216 6/10 3,340 31,000 27, 8 0 0
4 high 8’6” 9,755 1,239 10,994 7,4 79 12,356 +/- 216 6/10 3,340 30,640 2 7,72 0
Load centre - Load centre
Distance from front of spreader to centre of gravity of load.
Rated load
Based on 2 stage NFL mast 6115 mm lift height for container
handling, dedicated carriage for container handling and 20-40’
extendable container attachment
RATED CAPACITIES
Safety: Truck with Stage V engine conforms
to the current EU requirements.
22,
000
050 100 150 200 250
24,
000
26,
000
28,
000
30,
000
32,
000
H32XM-16CH
H28XM-16CH
Rated load (kg)
Reach (mm)
NOTES:
Specifications are affected by the condition of the vehicle and how it is equipped, as
well as the nature and condition of the operating area. Inform your dealer of the nature
and condition of the intended operating area when purchasing your Hyster®truck.
All capacities are according to EN1551.
Based on 18.00 - 33 tyre w/o load; radius 880 mm

5
POWERTRAINS
STANDARD EQUIPMENT AND OPTIONS
GENERAL
1.1 Manufacturer HYSTER
1.2 Model designation H28XD-CH H32XD-CH
1.3 Power: Battery, Diesel, LPG, Electric mains Diesel
ENGINE
7.1 Engine manufacturer / model Cummins / QSB 6.7 Mercedes Benz / OM936
7.1.1 EPA / CE Compliance Stage IIIA / IV Stage V
7.2 Engine output according to ISO 1585 kW@rpm 194 180
7.2.1 Max engine output according to ISO 1585 kW@rpm 201 180
7.3 Rated speed min-12,200
7.3.1 Torque at 1/min Nm / min-1990 @ 1,500 1000 @ 1200-1600
7.4 Number of cylinders / displacement # / cm36 / 6,690 6 / 7,698
7.5 Fuel consumption in accordance to VDI l/h Call
7.8 Alternator A120 100
7.10 Battery voltage/nominal capacity V / Ah 24 / 102
MISC
10.1 Working pressure for attachments bar 22.5
10.2 Oil volume for attachments l/m 100
10.3 Hydraulic oil tank, capacity l 274
10.4 Fuel tank, capacity l 364
10.4.1 DEF tank, capacity (Stage IV only) l 38
10.5 Steering design Type Hydraulic power steering
10.6 Number of steering rotation 6
10.7 Sound pressure level at the driver’s seat LpAZ EN12053 (1) Lpaz dB(A) Call
10.7.1 Sound power level during the workcycle LwAZ EN12053 (2) Lwaz dB(A) Call
10.8 Towing coupling, type DIN Yes / Pin
DRIVETRAIN
8.1 Type of drive unit Type Torque Converter
8.6 Transmission manufacturer / type Type ZF - 5WG211
8.4 Wheel drive / drive axle manufacturer / type # Axle Tech PRC3806W4H
8.5 Service brake Type Oil immersed disc
8.5 Parking brake Type Dry disc on drive axle
PERFORMANCE STD OPT
Mercedes 6R1000 7.7L Stage V Diesel Engine: Rated/Peak Power 241hp /
180kW X
Cummins QSB 6.7L Stage IIIA / IV Diesel Engine: Rated Power 260hp /
194kW - Peak Power 270hp / 201kW X
ZF WG211 5-Speed Transmission with 5 Speeds Forward and 3 Speeds
Reverse X
DRIVE STD OPT
Pneumatic Radial Drive Tyres - Michelin XZM / 16.00-R25 X
Pneumatic Radial Steer Tyres - Michelin XZM / 16.00-R25 X
Pneumatic Radial Spare Wheel - Michelin XZM / 16.00-R25 X
Steer Wheel Lug Protection Rings X
Conditional Travel Speed Limiter pre-set to 10 mph (16km/h) - Adjustable -
Based on load weight X
Pneumatic Bias Ply Drive Tyres – Continental ContainerMaster /
16.00-25 32PR X
Pneumatic Bias Ply Steer Tyres – Continental ContainerMaster /
16.00-25 32PR X
Spare Wheel - Continental ContainerMaster / 16.00 x 25-32 X
LIFT STD OPT
2 Stage Non Free Lift Mast - 187" (6155mm) Maximum Lift Height - 171"
(5660mm) Overall Lowered Lift Height - for 2-high stacking of 9'6" containers X
2 Stage Non Free Lift Mast - 364" (9255mm) Maximum Lift Height - 283"
(7175mm) Overall Lowered Lift Height - for 3-high stacking of 9'6" containers X
2 Stage Non Free Lift Mast - 388" (9860mm) Maximum Lift Height - 295"
(7480mm) Overall Lowered Lift Height - for 4-high stacking of 9'6" containers X
Mast Tilt - 6° Forward / 10° Back X
Hyster®812 20-40ft Telescopic Spreader X
Dedicated Carriage X
Hydraulic Spreader Stop at 30-ft Position X
7 Functions (5 Auxiliary) Hydraulic Control Valve X
7 Function Hose Group (5 Auxiliary) X
HANDLING STD OPT
Automatic Hydraulic Spreader Stop at 20-40ft Position X
Spreader Guides located at end of Spreader End Beams X
Automated One-touch Spreader Extend/Retract (20'-40') X
Overlowering Protection X
4 Lifting Eyes Located under Centre Beam of Spreader X
ERGONOMICS STD OPT
Enclosed Operator Cabin with Heating X
Enlosed Operator Cabin with Automatic Climate Control X
Automatic Climate Control off with open door X
Manual Tilt Operator Compartment for Service Access X
Powered Tilt Operator Compartment for Service Access X
Top Window with Armoured Glass (FOPS Certified) X
Top Window with Armoured Glass and Steel Bars (FOPS Certified) X
Mechanical Full Suspension Cloth Seat X
Mechanical Full Suspension Vinyl Seat X
Air Suspension Seat with Cloth Cover X
Air Suspension Seat with Vinyl Cover X
Deluxe Air Suspension Seat with Cloth Cover X
Deluxe Air Suspension Seat with Vinyl Cover X
Deluxe Air Suspension Seat with Cloth Cover and Heating X
Deluxe Air Suspension Seat with Cloth Cover, Heating and Ventilation X
Seat Belt - High-Visibility (Red) - 2 Point X
Seat Belt - High-Visibility (Red) - 3 Point X
High and Adjustable Seat Backrest X
Lateral Sliding Mechanism for Operator Seat X
I-pattern Wiper on Front Window X
H-pattern Wiper on Front Window X
Reading Light X
(1) Measured according to the test cycles and based on the weighting values contained in EN12053.
(2) Data available on request, as values are dependent on application

6
STANDARD EQUIPMENT AND OPTIONS
* Standard or optional in selected markets. Other options available through Special Products Engineering Department (SPED).
Contact Hyster for details.
ERGONOMICS (continued) STD OPT
Sun Roller Screens for Top and Rear Windows X
2 Sun Visors for Front Window X
Radio Preparation with 2 Speakers and Antenna X
Bluetooth Radio with 2 Speaker and Antenna X
Heated Top Window X
Heated Rear Window X
Heated Top and Rear Window X
Trainer Seat with Cloth Cover and 2-point Seatbelt X
Recirculation Fan X
Sun Roller Screens for Top and Rear Windows X
Interior Dome Light X
Dimmable Interior Light X
Accessory Mounting Bracket on A-Pillar X
Document Holder X
7" Integrated Performance Display X
Armrest on Leftside X
Joystick Hydraulic Controls- Non Clamp X
Lever Shift Direction Control - Mounted on Left Hand Side of Steering
Column X
Directional Control on Joystick X
2 External Wide Angle Mirrors mounted on Cab Handrail X
Emergency Hydraulic Stop on Armrest X
Tyre Pressure Monitoring System X
Load Weight Indicator X
Performance Modes Selectable in Display X
Coolant level warning on display X
Coolant level warning on display and Sight glass X
Preventative Maintenance Reminder X
DC/DC 24/12V Converter with 1 Power Socket and 2 USB Outlets X
DC/DC 24/12V Converter with 2 Power Sockets and 2 USB Outlets X
Audible Alarm - Reverse Direction Activated - Self-Adjusting 82-102 dB(A) X
Amber Strobe Light - Ignition and Switch Activated X
Blue LED Spotlight - Rear - Reverse Direction Activation X
VISIBILITY STD OPT
4 Halogen Work Lights Cab Mounted Front X
4 LED Work Lights Cab Mounted Front X
4 High Performance LED Work Lights Cab Mounted Front X
2 Halogen Cab Mounted Rear X
2 LED Cab Mounted Rear X
2 High Performance LED Cab Mounted Rear X
2 Halogen Drive Lights Front Fenders X
2 LED Drive Lights Front Fenders X
2 LED Rearward Cluster with Stop, Tail and Reverse Lights X
Directional Lights on Front Fender and Rear Cluster X
OPERATION STD OPT
Electronic Horn 105 db(A) X
Air Horn 112 db(A) X
Truck Start - Key Switch - without Seatbelt Interlock X
Truck Start - Key Switch - with Seatbelt Interlock X
Truck Start – Key Switch with Start Button – without Seatbelt Interlock X
Truck Start – Key Switch with Start Button and Seatbelt Interlock X
Truck Start – Key Switch with Start Button - with Seatbelt Interlock on
Sequence X
Operator Password in Display - Required for Truck Start X
Tyre Pressure Monitoring System (SPED) X
Engine Block Heater - 230V X
Fuel Cap - Non Lockable X
Fuel Cap - Lockable X
Jump Start Connector to Battery X
Park Brake - Manual X
Park Brake - Automatic X
Hydraulic System Temperature Protection with Performance De-rate X
OPERATION (continued) STD OPT
Automatic Engine Shutdown with Timer X
Travel Speed Limiter - Unconditional and Customer Adjustable - pre-set to
10mph (16km/h) X
Delayed engine shutdown for turbo cooldown X
Conditional Travel Speed Limiter pre-set to 10 mph (16km/h) - Adjustable -
Based on load weight X
Fuses Partially Replaced by Electric Circuit Breakers X
Stainless Steel Strainer In Fuel Neck X
Hyster Tracker Wireless Monitoring - EMEA X
Hyster Tracker Wireless Verification X
Hyster Tracker Wireless Monitoring - Wifi X
Hyster Tracker Wireless Access HID Prox Card Reader X
Hyster Tracker Wireless Access ISO Prox Card Reader X
Hyster Tracker Wireless Access iClass MiFare Prox Card Reader X
4 Lifting Eyes - 2 Front and 2 Rear X
Automatic Greasing System for Base Truck X
Automatic Greasing System for Mast X
Automatic Greasing System for Spreader X
Centralised Greasing System for Top End Outer Mast X
Front and Rear Mud Flaps X
Rear View Camera System with Rear-Mounted Display X
Rear View Camera System with Front-Mounted Display X
Belly Pan X
Extra Insulation Kit for Sound and Temperature X
Hydraulic Accumulator in Lift Circuit X
Visual Mast Tilt Indicator (Mechanical) X
Pressure Compensated Lowering X
APPEARANCE STD OPT
Hyster yellow paint base truck X
Special paint base truck X
Operator compartment special paint (outside only) X
Hazard warning striping on counterweight X
SUPPLEMENTAL STD OPT
Literature package and labels X
Operator’s manual X
CE certification X
Warranty: 12 Months / 2,000 Hours Parts manufacturer's warranty X
Warranty: 24 Months / 4,000 Hours Parts manufacturer’s warranty X
Extended Protection Plan 36 Months / 6,000 Hours X
Extended Protection Plan 60 Months / 10,000 Hours X

7
FRONT END EQUIPMENT
Range of 2 Stage NFL Masts
DEDICATED CARRIAGE FOR TOP PICK
20’- 40’ TELESCOPIC SPREADER 812 ELME 812 TOP LIFT SPREADER FOR DEDICATED CH CARRIAGE

Printed in EU. Part number: 3991539 Rev. 02-09/22-TLC
10004925
Safety: This truck conforms to the current EU requirements
HYSTER EUROPE
Centennial House, Building 4.5, Frimley Business Park,
Frimley, Surrey, GU16 7SG, United Kingdom
Visit us online at www.hyster.com or call us at [phone].
HYSTER-YALE UK LIMITED trading as Hyster Europe.
Registered Address: Centennial House, Building 4.5, Frimley Business Park, Frimley, Surrey GU16 7SG, United Kingdom.
Registered in England and Wales. Company Registration Number: 02636775.
© HYSTER-YALE UK LIMITED. 2022, all rights reserved. Hyster and are trademarks of Hyster-Yale Group, Inc.
Hyster products are subject to change without notice. Trucks may be shown with optional equipment.