Hyundai power products HBVE2800 User manual

1
SHREDDER
HBVE2800
ORIGINAL INSTRUCTIONS
WARNING: Read thoroughly the instruction manual before use

2
CONTENET
1. SAFETY INSTRUCTIONS 3
2. EXPLANATION OF SYMBOLS 13
3. PARTS LIST 14
4. CHARACTERISTICS 14
5. GETTING STARTED 15
6. OPERATION 16
7. MAINTENANCE AND STORAGE 18
8. DECLARATION OF CONFORMITY 19
9. WARRANTY 20
10. PRODUCT FAILURE 21
11. WARRANTY EXCLUSIONS 22

3
1. SAFETY INSTRUCTIONS
Before using this product, carefully read and
understand all the safety recommendations and
instructions for safe operation.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Keep this manual handy so that you may refer to it
later whenever any questions arise.
Always be sure to include this manual when selling,
lending, or otherwise transferring the ownership of this
product.
IMPORTANT! This product should only be used
by experienced users, who have thoroughly read
this instruction manual.
Only persons who have received adequate instructions
should use the product.
Never allow children, persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge or people unfamiliar
with these instructions to use the machine.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children.
Never allow children or persons unfamiliar with these
instructions to use the product
1.1- General safety instructions
Read the instructions carefully. Be familiar with the
controls and the proper use of the appliance

4
- For safe operation
1. Never operate this product when you are
fatigued, ill, or upset, or under the influence of
medication that may make you drowsy, or if you
are under the influence of alcohol or drugs. Keep
in mind, that the operator or user is responsible
for accidents or hazards occurring to other
people or their property.
2. Wear personnel protective equipment: gloves;
safety footwear, snug fitting clothing, goggles or
face protection, hearing and head protection
devices.
Use vibration-proof gloves.
3. Never allow people unfamiliar with these
instructions to use the appliance. Local
regulations may restrict the age of the operator.
Never operate the appliance while people,
especially children, or pets are nearby. Do not
start or use the product when persons are
nearby.
Keep bystanders (esp. children) and animals out
of the work area. Children, pets and bystanders
should be kept away when you start or operate
the product
Keep children away.
The use of this product by children is forbidden.
Keep the product away from children or from
their environment.
Children should be supervised to ensure that
they do not play with the product.
Never leave the product unattended especially

5
when children are nearby.
4. Never start working until you have a clear work area,
and secure footing,
5. Keep all parts of your body away from the feeding
opening when the engine is running.
6. Before you start the product, make sure the product
is properly assembled and that insertion chamber is
not obstructed.
7. All product service, other than the
maintenance listed in the Instructions Manual,
should be performed by competent service
personnel.
8. Always switch off the engine before carrying any
intervention.
9. Do NOT expose to and do not use during bad
weather conditions: never work in bad weather
(e.g. rain, storm, snow, high wind …), never work
when visibility is poor or in very high or low
temperatures. Never leave product outdoors
under the rain.
10. Keep the handles dry, clean and free of grease, oil
or fuel.
11. Operate the product only in outdoors or in well
ventilated areas.
12. Do not operate the product on slopes or any other
unstable location.
13.1. Become familiar with the controls and the proper
use of the equipment.
13.2. Store idle machine. When not in use, product
should be stored in a dry, locked up place, out of reach
of children.

6
13.3. Do not force the tool.
It will do the job better and safer at the rate speed for
which it is intended.
The product will do a better and safer job if it is used
only for the purposes it was designed for.
13.4. Remove adjusting keys and wrenches
Form the habit of checking to see that keys and
adjusting wrenches are removed from the machine
before operating it.
13.5. Defective switches or other part that is damaged
should be properly repaired or replaced by an
authorized service centre. Do not use the machine if
the switch does not turn it on and off.
13.6. Warning
The use of any accessory or attachment, other than
those recommended in this instruction manual, may
present a risk of injury to persons or animals and may
cause damages.
The user or operator is solely responsible for accidents
or hazards or any damages or injury caused to
properties and/or persons and/or animals.
The user/operator is responsible for the safety of third
persons present or entering the work area.
13.7. Remarks
The safety precautions and instructions given in this
manual are unable to cover in detail all the conditions
and situations that may arise.
The operator and/or user must use common sense
and caution when operating the product especially for
any matters that are not referred in the above

7
1.2- Safety precautions
1.2.1- Initial preparation before operation
- When you operate the machine, always wear full-length
trousers, as well as sturdy, closed footwear that provide
good support. Do NOT operate the machine wearing
shorts, when barefoot or wearing open sandals!
- Do not wear loose clothing or jewellery that can be
drawn into the inlet. Keep long hair away from the inlet.
Under no circumstances should jewellery, any other body
ornamentation, or loose clothing be worn while operating
the tool as these items could be drawn into the suction
orifice. Avoid wearing clothing that is loose fitting or that
has hanging cords or ties.
When working outdoors, rubber gloves and non-slip
footwear should always be worn.
If you have long hair, put it in a hair net.
- Wear protective equipment and always wear protective
goggles while operating the tool.
Wearing protective equipment such as a dust mask,
non-slip footwear, protective gloves, a helmet and/or
hearing protection (depending on the type and application
of the electrical device concerned) reduces the risk of
injury.
- When performing work that generates dust, wear a dust
protective mask to prevent dust irritation.
- Each time before you use the machine, check the
integrity of the product’s power cord and your own
extension cord for signs of damage and ageing. Do not
use the machine if the cord is damaged or worn. The
product should only be operated when its accessories are
in perfect working order.

8
Any damaged or defective components should be
repaired immediately by a qualified technician. Never
attempt to use an incomplete, not fully assembled or
modified machine.
- Under no circumstances or if safety equipment such as
collection box is not installed, before using, always
visually inspect to see, that the shredding means,
shredding means bolts and other fasteners are secure,
the housing is undamaged and that guards and screens
are in place. Replace worn or damaged components in
sets to preserve balance. Replace damaged or
unreadable labels.
- Only use a weather proof extension cable fitted with
coupler to IEC 60320-2-3.
Only extension cords that are rated for outdoor use
should be used outdoors.
Any extension cord used should have a minimum cross
section of not light than H07RN-F 2x1.5mm2.
1.2.2- During use
- Before starting the machine, make certain that the
feeding chamber is empty. Do not allow hands or any
other part of the body or clothing inside the feeding
chamber, discharge chute, or near any moving part.
- Always direct the cable to the rear away from the
appliance. Make sure the power cord is kept behind and
away from the device while you work.
- If the power cord or extension cord becomes damaged
during use, disconnect the supply cord from the mains
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY CORD FROM ITS

9
POWER SOURCE.
- If the supply cord is damaged, it must be replaced by a
special cord or assembly available from the manufacturer
or its service agent.
- Do not carry the appliance by the cable. Never use the
power cord as a handle to lift or carry the device.
- Always disconnect the product from the mains supply in
the following circumstances:
. whenever you leave the machines; when the machine
is not in use, is being carried/transported, or is left
unattended.
. before clearing a blockage; while examining, cleaning
or unclogging the product.
. before checking, cleaning or working on the product,
performing maintenance on it, or attaching accessories to
it.
. If the cutting device strikes a foreign object (e.g. small
stone, piece of metal…) or starts to vibrate abnormally.
- Use the machine in daylight or with adequate
illumination (good artificial light).
- Keep proper balance and footing at all times. Do not
overreach. Never stand at a higher level than the base of
the machine when feeding material into it.
- Bear in mind that the force generated by an electrical
device can make you lose your balance. Therefore, make
sure that your feet are firmly planted and that your body is
well balanced when you are operating the product.
- Never operate the machine on damp areas or wet grass.
- Do NOT use the machine on slope areas.
- Keep the chute outlet and ventilation holes (cooling air
inlets) unobstructed, clear of debris and clean at all times.

10
- Do not assume of your knowledge of the machine.
Remember that a split second of negligence is sufficient
to cause serious damage. Be aware of your surroundings
and stay alert for potential hazards that you may not hear
while operating the product.
- Keep a safe distance from the ejection zone when
working with the tool.
- Be especially careful that material contains no metal
parts, stones, bottles, cans or other foreign objects before
inserting into the tool.
- If the cutting mechanism strikes any foreign objects or if
the machine should start making any unusual noise or
vibration, immediately shut off the power source and
allow the machine to stop. Disconnect the machine from
the supply and take the following steps before restarting
and operating the machine:
i) inspect for damage;
ii) replace or repair any damaged parts;
iii) check for and tighten any loose parts.
- If the machine becomes clogged, shut-off the power
source and disconnect the machine from supply before
cleaning debris.
Never operate the machine with defective guards or
shields, or without safety devices, for example debris
collector in place.
Keep the power source clean of debris and other
accumulations to prevent damage to the power source
or possible fire.
Do not transport this machine while the power source is
running.