Hyundai power products HPVD18L-B-1 User manual

ORIGINAL INSTRUCTIONS
INSTRUCTION
CORDLESS DRILL
HPVD18L-B-1

Fig. A

1. APPLICATION
The power tool is intended for driving and drilling through wood and plastics It is not designed for
professional use.
WARNING! Read this manual and general safety instructions carefully before using the
appliance, for your own safety. Your power tool should only be passed on together with these
instructions.
2. DESCRIPTION (FIG A)
1. On/off switch
2. Forward/reverse switch
3. Torque adjustment collar
4. Keyless chuck
5. Battery
6. Battery release button
7. LED light
8. Speed selector
9. Loading socket
10. Charger
3. PACKAGE CONTENT LIST
▪ Remove all packaging materials.
▪ Check that the package contents are complete.
▪ Check the tool and the charger for transportation damage.
▪ Keep the packing materials as far as possible till the end of the warranty period. Dispose it into your local
waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with plastic bags! Danger of
suffocation!
1 x Cordless drill
1 x Charger
1 x Manual
2 x batteries
Helical HSS drills : (6pcs) 1.5/2.5/3/4/5/6
Bit holder :1pc
Male tips : (6pcs) PH1/9H2/PZ1/PZ2/5/6
If any parts are missing or damaged, please contact your dealer.

4. SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the
tool.
In accordance with
essential requirements of
the European directive(s)
Wear eye protection
Wear gloves
Read manual before use
Double insulation
(Only for charger)
Max temperature
Recycle
Do not put the battery in
water
Do not put the battery on
fire
5. GENERAL POWER TOOL SAFETY WARNINGS
General power tool safety warnings
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.

2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a
dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power
source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used. Use of dust collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you to become complacent and
ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if detachable, from
the power tool before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer.A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another.Shorting the battery terminals together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.Liquid
ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified.Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature.Exposure to fire or temperature
above 130 °C may cause explosion.
g) Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures outside the
specified range may damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.
Drill safety warnings
1) Safety instructions for all operations
a) Wear ear protectors when drilling.Exposure to noise can cause hearing loss.
b) Brace the tool properly before use. This tool produces a high output torque and without properly
bracing the tool during operation, loss of control may occur resulting in personal injury.
c) Hold the power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory or fasteners may contact hidden wiring.Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
2) Safety instructions when using long drill bits
a) Never operate at higher speed than the maximum speed rating of the drill bit. At higher
speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting
in personal injury.
b) Always start drilling at low speed and with the bit tip in contact with the workpiece. At
higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece,
resulting in personal injury.
c) Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can
bend causing breakage or loss of control, resulting in personal injury.

6. SCREWDRIVER SAFETY WARNING
Hold the power tool by insulated gripping surfaces, when performing an operation where the
fastener may contact hidden wiring.Fasteners contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an electric shock.
7. ADDITIONAL SAFETY WARNINGS
▪ Protect the battery charger from rain and moisture. The penetration of water in a battery charger increases
the risk of electric shock.
▪ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of
battery may create a risk of fire when used with another battery.
▪ Do not charge other batteries. The battery charger is suitable only for charging our lithium ion batteries
within the listed voltage range. Otherwise there is danger of fire and explosion.
▪ Keep the battery charger clean. Contamination may cause the danger of electric shock.
▪ Check the battery charger, cable and plug each time before using. Do not use the battery charger when
defects are detected. Do not open the battery charger yourself and have it repaired only by qualified
personnel using original spare parts. Damaged battery chargers, cables and plugs increase the risk of
electric shock.
▪ Do not operate the battery charger on easily inflammable surfaces (e. g. paper, textiles, etc.) or in
combustible environments. There is danger of fire due to the heating of the battery charger during charging.
▪ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
▪ Do not open the battery yourself. There is danger of a short circuit.
▪ Protect the battery against heat, e.g., including against continuous sun irradiation and fire. There is a
danger of explosion.
▪ Do not short-circuit the battery. There is a danger of explosion.
▪ In case of damage and improper use of the battery, vapors may be emitted. In case of accidents, provide
for fresh air and consult a physician. The vapors can irritate the respiratory system.

7.1 Special safety instructions for battery and
charger
7.2 If under extreme conditions any electrolyte should
escape from the battery, it's essential to avoid contact
with skin. If electrolyte does come into contact with your
skin, rinse it off with water. In the event of electrolyte
contact with your eyes, it's essential to consult a doctor.
This charger can be used by children aged from 8 years
and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
▪Before the use of the charger and the battery read the
instruction manual carefully.
▪During the charge process, the current used should
correspond to the current of the battery charger.
▪Never let moisture, rain or splashed water reaches the
charging location.
▪The ambient temperature must not exceed 40 °C.

▪Batteries which are defective or damaged or can no
longer be recharged must be disposed as a hazardous
waste. Hand them over at a special collection point.
Never harm our environment. Do not throw unusable
storage-battery packet away into the domestic waste,
into fire or into water.
If the supply cord of the charger is damaged, it must be
replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Use only storage-battery packet, which have been
produced by the original manufacturer.
▪Always keep the surface of the charger free from dust
and dirt.
Insert the battery packet into the charger. Follow the
guidelines provided concerning polarity.
▪Always remove battery packet before working on the
machine
▪When the battery is outside the drill, cover the contacts
to avoid short circuits (e.g. from tools)
▪Do not throw batteries into water or fire, risk of
explosion!

▪Protect the battery from impacts, and don't open it.
▪Never discharge the battery completely and recharge
occasionally if not used for a prolonged period
WARNING: Do not recharge non-rechargeable
batteries.
7.2 Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with the tool’s construction and design:
▪Damage to lungs if an effective dust mask is not worn.
▪Damage to hearing if effective hearing protection is not worn.
▪Health defects resulting from vibration emission if the power tool is being used over longer period of time or
not adequately managed and properly maintained.
WARNING! This machine produces an electromagnetic field during operation. This field may under
some circumstances interfere with active or passive medical implants. To reduce the risk of serious
or fatal injury, we recommend persons with medical implants to consult their physician and the
medical implant manufacturer before operating this machine.
8. OPERATION
8.1 Charging the battery
The battery (5) must be charged before first use. Only after several charge and discharge cycles the battery
will attain full capacity.
Only use the provided adaptor (10) to charge the battery set.
Only charge the battery set when the ambient temperature is within 10° - 40 °C.
Plug the adaptor (10) to a 230 V alternating voltage source.
The battery (5) should under no circumstances be disassembled.

To remove the battery, press the battery release button (6) on the top side of the battery set and extract the
battery (5).
Connect the plug of the charger to the loading-socket (9) of the battery-set.
Red LED will light once the battery has been connected to the charger and the charging procedure will
proceed.
The battery set is completely loaded and ready for use once the green LED is lit and the red LED is OFF –
after approximately 1-1.5 hour(fast charger) or 3-5 hours (slow charger).
8.2 Positioning and removing a drill or screw bit
This tool is equipped with a keyless chuck.
▪Open the chuck by turning the collar.
▪Insert the drill or screw bit in the chuck.
▪Close the chuck by firmly tightening the front collar (a) while holding the rear part (b) of the chuck with the
other hand.
▪In order to remove the drill or screw bit proceed in reverse order. Before positioning or removing a drill or
screw bit always remove the battery from the machine.
8.3 Forward/reverse switch
▪Push the forward/reverse switch (2) from right to left side to drill holes and fasten screws.
▪Push the forward/reverse switch (2) from left to right side to loosen screws. Always wait until the motor has
come to a complete standstill before changing the direction of rotation.
8.4 Adjusting the torque
This machine has been fitted with an adjustable coupling (18+1 pos.) to limit the torque when tightening
screws.
▪Turn the adjustment collar (3) clockwise to reduce the torque and counterclockwise to increase the torque.
The correct setting depends on the type and size of the screw and the work piece.
▪In case of doubt, start with the lowest setting and increase the torque until you have reached the desired
result.
▪For drilling, turn the adjustment collar fully counterclockwise (to the drilling symbol).
8.5 Switching on and off
▪Push the forward/reverse switch (2) on the left side or on the right side.
▪To switch on the machine, press the on/off switch (1).

▪To switch off the machine, release the on/off switch.
8.6 Variable speed
▪Applying more pressure to the On/Off switch will increase the speed.
▪Applying less pressure to the On/Off switch will decrease the speed.
8.7 Lower/higher speed selecting
▪Lower speed: switch Speed convert button to position “1”.
▪Higher speed: switch Speed convert button to position “2”.
9. CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
10. TECHNICAL DATA
Model nr.
HPVD18L-B-1
Rated voltage
18Vd.c. (max 20V)
No – load speed
0-350 / 0-1350min-¹
Torque positions
18+1
Max. drill capacity steel
Ø10mm
Charger
HPVD18L-B-1
Input: 100-240~,50/60Hz, 0.8A, output: 21.5V d.c., 1.5A

Battery
HPVD18L-B-1
20V d.c.,2000 mAh with 5 Li-ion cells
Charger time
1.5 hour
Max. torque
28 Nm
Chuck type
Keyless chuck
Acoustic pressure level
LpA
87.6 dB(A), K=5dB(A)
Acoustic power level
LwA
98.6dB(A), K=5dB(A)
Vibration
1.298m/s² K =1,5 m/s²
11. NOISE
Noise emission values measured according to relevant standard.
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
Information:
- The declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another;
- The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
- The vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used;
- need to identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle in addition to the trigger time).

12. STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid too high
and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build-up.
13. ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it with the household refuse,
but in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling
advice.
14. BATTERY PACK
This product contains Li-ion. To preserve natural resources, please recycle or dispose of batteries properly. Local, state
or federal laws may prohibit disposal of Li-ion batteries in ordinary trash. Consult your local waste authority for
information regarding available recycling and/or disposal options.

15. DECLARATION OF CONFORMITY
BUILDER SAS
ZI, 32 rue Aristide Bergès – 31270 Cugnaux – France
Declares that the machinery designated below:
Drill / Screwdriver
HPVD18L-B-1
S/N: 20210409597-20210410096
is in conformity with the essential requirements and other relevant provisions of the applicable European
Directives, based on the application of European harmonized standards. Any unauthorized modification of
the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature);
2011/65/EU+(EU) 2015/863; 2006/42/EC; 2014/30/EU
European harmonized standards (including, if applicable, their amendments up to the date of signature);
EN 62841-1：2015; EN 62841-2-1:2018
EN55014-1: 2017; EN55014-2 : 2015
EN 61000-3-2:2014; EN 61000-3-3:2013
Cugnaux, le 15/01/2021
Phillipe MARIE / PDG
Responsible of technical file: M. Olivier Patriarca

WARRANTY
The manufacturer guarantees the product against defects in material and workmanship for a period of 2
years from the date of the original purchase. The warranty only applies if the product is for household use.
The warranty does not cover breakdowns due to normal wear and tear.
The manufacturer agrees to replace parts identied as defective by the designated distributor. The
manufacturer does not accept responsibility for the replacement of the machine, in whole or in part , and/or
ensuing damage.
The warranty does not cover breakdowns due to:
• insu󰀩cient maintenance.
• abnormal assembly, adjustment or operations of the product.
• parts subject to normal wear and tear.
The warranty does not extend to:
• shipping and packaging costs.
• using the tool for a purpose other than that for which it was designed.
• the use and maintenance of the machine done in a manner not described in the user manual.
Due to our policy of continuous product improvement, we reserve the right to alter or change specications
without notice. Consequently, the product may be di󰀨erent from the information contained therein, but a
modication will be undertaken without notice if it is recognized as an improvement of the preceding
characteristic.
READ THE MANUAL CAREFULLY BEFORE USING THE MACHINE.
When ordering spare parts, please indicate the part number or code, you can nd this in the spare parts list
in this manual. Keep the purchase receipt; without it, the warranty is invalid. To help you with your product,
we invite you to contact us by phone or via our website:
• +33 (0)9.70.75.30.30
• https://services.swap-europe.com/contact
You must create a "ticket" via the web platform.
• Register or create your account.
• Indicate the reference of the tool.
• Choose the subject of your request.
• Describe your problem.
• Attach these les: invoice or sales receipt, photo
of the identication plate (serial number), photo
of the part you need (for example: pins on the
transformer plug which are broken).
16. WARRANTY

WHAT TO DO IF MY MACHINE BREAKS DOWN?
If you bought your product in a store:
a) Empty the fuel tank.
b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case,
the repairer will refuse the machine.
Go to the store with the complete machine and with the receipt or invoice.
If you bought your product on a website:
a) Empty the fuel tank.
b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case,
the repairer will refuse the machine.
c) Create a SWAP-Europe service ticket on the site: https://services.swap-europe.com When making the
request on SWAP-Europe, you must attach the invoice and the photo of the nameplate (serial number).
d) Contact the repair station to make sure it is available before dropping o󰀨 the machine.
Go to the repair station with the complete machine packed, accompanied by the purchase invoice and the
station support sheet downloadable after the service request is completed on the SWAP-Europe site
For machines with engine failure from manufacturers BRIGGS & STRATTON, HONDA and RATO, please
refer to the following instructions.
Repairs will be done by approved engine manufacturers of these manufacturers, see their site:
• http://www.briggsandstratton.com/eu/fr
• http://www.honda-engines-eu.com/fr/service-network-page;jsessionid=5EE8456CF39CD572AA2AEEDFD
290CDAE
• https://www.rato-europe.com/it/service-network
Please keep your original packaging to allow for after-sales service returns or pack your machine
with a similar cardboard box of the same dimensions.
For any question concerning our after-sales service you can make a request on our website https://
services.swap-europe.com
Our hotline remains available at [phone].
17. PRODUCT FAILURE

THE WARRANTY DOES NOT COVER:
• Start-up and setting up of the product.
• Damage resulting from normal wear and tear of the product.
• Damage resulting from improper use of the product.
• Damage resulting from assembly or start-up not in accordance with the user manual.
• Breakdowns related to carburetion beyond 90 days and fouling of carburetors.
• Periodic and standard maintenance events.
• Actions of modication and dismantling that directly void the warranty.
• Products whose original authentication marking (brand, serial number) has been degraded, altered or
withdrawn.
• Replacement of consumables.
• The use of non-original parts.
• Breakage of parts following impacts or projections.
• Accessories breakdowns.
• Defects and their consequences linked to any external cause.
• Loss of components and loss due to insu󰀩cient screwing.
• Cutting components and any damage related to the loosening of parts.
• Overload or overheating.
• Poor power supply quality: faulty voltage, voltage error, etc.
• Damages resulting from the deprivation of enjoyment of the product during the time necessary for repairs
and more generally the costs related to the immobilization of the product.
• The costs of a second opinion established by a third party following an estimate by a SWAP-Europe repair
station
• The use of a product which would show a defect or a breakage which was not the subject of an immediate
report and/or repair with the services of SWAP-Europe.
• Deterioration linked to transport and storage*.
• Launchers beyond 90 days.
• Oil, petrol, grease.
• Damages related to the use of non-compliant fuels or lubricants.
* In accordance with transport legislation, damage related to transport must be declared to carriers within 48
hours maximum after observation by registered letter with acknowledgement of receipt.
This document is a supplement to your notice, a non-exhaustive list.
Attention: all orders must be checked in the presence of the delivery person. In case of refusal by the
delivery person, it you must simply refuse the delivery and notify your refusal.
Reminder: the reserves do not exclude the notication by registered letter with acknowledgement within 72
hours.
Information:
Thermal devices must be wintered each season (service available on the SWAP-Europe site). Batteries must
be charged before being stored.
18. WARRANTY EXCLUSIONS