Hyundai DIGITAL NAVIGATION SYSTEM User manual

DIGITAL NAVIGATION SYSTEM
DIGITAL NAVIGATION SYSTEM
User's Manual

Preface
Th ank you for purchasing this Audio
Navigation System.
This user's manual explains how to use
the Hyundai Motor Audio Navigation
System.
Bef ore us ing th e pr odu c t , re ad the
contents of this user's manual carefully and
use this product safely.
●
The screens shown in this manual may
differ with the actual screens of the
product.
●

The design and specification of this
product may change without prior
notification for product improvement.
●
Wh en tran sf err in g th e ve hic le to
another individual, include this user's
manual so that the nex t driver can
continue its use.
iPod®
iPod® is a registered trademark of Apple
Inc.
Bluetooth®
The Bluetooth® word mark and logos are
re gi st er e d t ra de ma r ks o wn ed b y
Bluetooth SIG, Inc. and any use of such
marks by Hyundai is under license.
A Bluetooth® enabled cell phone is
required to use Bluetooth® wireless
technology.
All Map Database cannot be copied without permission.
This is protected by U.S. copyright laws. All rights not expressly granted are reserved.
You may not otherwise reproduce, modify, and distribute the content without M&Soft, Inc's prior written consent.

PART 1
PRE-OVERVIEW
Introduction 󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 1-2
Controller and functions  󳎺󳎺 1-3
Basic operation and setting  󳎺 1-6
PART 2
AUDIO SYSTEM
Operating the radio 󳎺󳎺󳎺󳎺󳎺 2-2
Operating the CD Player 󳎺󳎺󳎺 2-10
Operating external devices  󳎺 2-22
PART 3
NAVIGATION SYSTEM
Limitations of the navigation
system  󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 3-2
Starting navigation system󳎺󳎺 3-5
Map Functions 󳎺󳎺󳎺󳎺󳎺󳎺󳎺 3-5
Setting a destination  󳎺󳎺󳎺󳎺 3-12
Operating after setting
a destination  󲼶󲼶󲼶󲼶󲼶󲼶󲼶 3-28
Route guidance󲼶󲼶󲼶󲼶󲼶󲼶󲼶 3-30
Setup and Information 󲼶󲼶󲼶 3-36
PART 4
VOICE COMMAND SYSTEM
Operating voice command 󳎺󳎺 4-2
Setting up the voice command
system  󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 4-4
Voice command list 󳎺󳎺󳎺󳎺󳎺 4-6
Table of contents

PART 5
Bluetooth® HANDS FREE
Before using the Bluetooth®
Handsfree󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 5-2
Converting Bluetooth® Handsfree
mode 󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 5-2
Pairing and connecting a Bluetooth®
phone  󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 5-4
Bluetooth® Handsfree screen
layout  󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 5-9
Making a call  󳎺󳎺󳎺󳎺󳎺󳎺󳎺 5-11
Answering a call 󳎺󳎺󳎺󳎺󳎺󳎺 5-13
Operating menus during a call 5-14
Phone Book 󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 5-16
Call History List󳎺󳎺󳎺󳎺󳎺󳎺󳎺 5-19
PHONE MUSIC 󳎺󳎺󳎺󳎺󳎺󳎺󳎺 5-21
Bluetooth® settings󳎺󳎺󳎺󳎺󳎺 5-24
Important information  󳎺󳎺󳎺 5-30
PART 6
REAR CAMERA
About Rear Detection Camera 6-2
PART 7
APPENDIX
Troubleshooting guide  󳎺󳎺󳎺 7-2
Map legend  󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 7-5
INDEX󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 7-8
Table of contents

PRE-OVERVIEW 1-1
PRE-OVERVIEW
PART 1
PRE-OVERVIEW
Introduction
 󳎺󳎺󳎺󳎺󳎺󳎺󳎺󳎺 1-2
Important information about this
manual 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-2
Precaution for safe usage 󲼶󲼶󲼶󲼶 1-2
Controller and functions
 󳎺󳎺󳎺 1-3
Control panel󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-3
Steering wheel remote controller󲼶 1-5
Basic operation and setting
󳎺󳎺 1-6
Turning the Power ON 󲼶󲼶󲼶󲼶󲼶 1-6
Turning the Power OFF 󲼶󲼶󲼶󲼶󲼶 1-6
Turning the Audio ON/OFF 󲼶󲼶󲼶 1-6
Adjusting audio volume󲼶󲼶󲼶󲼶󲼶 1-7
How to operate the screen menu󲼶 1-7
Operating typical screen menu󲼶 1-7
Inputting letter by using screen
keyboard󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-7
Displaying the list 󲼶󲼶󲼶󲼶󲼶󲼶 1-7
Selecting an item in a list 󲼶󲼶󲼶 1-8
Sorting items from the list󲼶󲼶󲼶 1-8
How to operate menu by
voice command󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-8
Conditions for voice recognition
system󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-8
Giving voice command 󲼶󲼶󲼶󲼶 1-9
Sound setting󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-9
FAD/BAL󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-9
BASS/MID/TREB 󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-10
Touch screen beep ON/OFF 󲼶󲼶 1-10
Surround ON/OFF 󲼶󲼶󲼶󲼶󲼶󲼶 1-10
Display setting 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-10
Display mode󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-10
Brightness 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-10
Display OFF󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-10
Display ON 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 1-10

1-2 PRE-OVERVIEW
PART 1 PRE-OVERVIEW
Introduction
This user manual contains instructions related
to safety. Closely observe and comply with all
of the safety instructions found within this
manual.
WARNING !
Disobeying the warnings listed within this
user's manual may cause fatal or serious inju-
ries. Warnings indicate matters which may
directly lead to accidents.
CAUTION!
Disobeying the cautions listed within this user
manual may lead to accidents or cause injury.
Cautions indicate matters which may lead to
vehicle damage or malfunction.
INFORMATION
Information which the user must be aware or
allows for more convenient use of the device.
Precaution for safe usage
WARNING !
•
Do not operate the Audio Navigation system
while driving.
• Do not disassemble, assemble, or modify the
Audio Navigation system.
•
Do not watch the screen for prolonged peri-
ods of time while driving.
•
Set the volume to a level which allows the
driver to be aware of external conditions.
CAUTION!
•
Do not operate the Audio Navigation system
for prolonged periods of time with the vehi-
cle ignition in ACC. Such operations may
lead to battery discharge.
•
Be cautious not to spill water or introduce
foreign objects into the device.
•
Do not cause severe shock to the device.
Direct pressure onto the front side of the
monitor may cause damage to the LCD or
touch panel.
•
In case of product malfunction, please con-
tact your place of purchase or service cen-
ter.
•
When cleaning the touch screen, make sure to
turn off the device and use a dry and smooth
cloth. Never use tough materials, chemical
cloths, or solvents (alcohol, ammonia, ben-
zene, thinners, etc.) as such materials may
damage the device panel or cause color and
quality deterioration.
Reference Page
This indicates the title and page that you
should refer to.

This indicates a key on the control panel.
Voice Command
This indicates an operation by voice command.
Important information about
this manual

PRE-OVERVIEW 1-3
PRE-OVERVIEW
Control panel
Controller and functions
1
Power / Volume control knob
●
Push knob (over 0.8 second) : Turns the
power off.
●
Push knob (under 0.8 second) : Each time the
knob is pressed, the Audio is turned on and
off.
●
Tune knob : The range of volume adjustment
is between 0 ~ 35.
2
FM/AM
Each press will change the bands in the fol-
lowing order: FM1
→
FM2
→
AM
→
FM1
3
XM
Each press will change the bands in the fol-
lowing order: XM1
→
XM2
→
XM3
→
XM1
4
CD/AUX
Each press will change the bands in the follow-
ing order: DISC(CD, MP3)
→
(USB or iPod)
→
(AUX)
→(
Phone Music)
→
DISC(CD, MP3)
5
SEEK/TRACK Up/Down
●
SHORT KEY(less than 0.8 second)
• FM/AM Mode : Automatically searches for
the previous or next broadcast frequency
and starts playing.
• XM Mode : Receives the previous or next
channel.
• CD Mode : Plays the previous or next track.
• MP3, USB Mode : Plays the previous or
next file.
• iPod Mode : Plays the previous or next
song.
●
LONG KEY(over 0.8 second)
• FM/AM Mode : Quickly moves through
the frequencies while the button is
pressed. Once released, automatically
searches for broadcasts which can be
received.
• XM Mode : Quickly moves to the previous
or next channel.
2
3
4
5
7
8
9
10
11
16
12 13
14

1-4 PRE-OVERVIEW
PART 1 PRE-OVERVIEW
• CD Mode : REW/FF the current playing
track.
• MP3, USB Mode : REW/FF the current play-
ing file.
• iPod Mode : REW/FF the current playing
song.
6
TUNE knob
- FM/AM Mode : Turn the knob to search for
the desired frequency. Press the knob to
receive the selected frequency.
- XM Mode : Turn the knob to search for the
desired channel. After a brief moment, the
selected channel will be displayed.
- CD Mode : Turn the knob to search for the
desired track. Press the knob to play the
selected track.
- MP3, USB Mode : Turn the knob to search for
the desired file.
Press the knob to play the selected file.
- iPod Mode : Turn the knob to search for the
desired song. Press the knob to play the
selected song.
7
MAPVOICE
Displays the map screen for the current posi-
tion.
8
DEST
Displays the Destination menu screen.
9
ROUTE
Displays the Route menu screen.
10
SETUP
Displays the Setup menu screen.
11
PHONE
Displays the Bluetooth handsfree screen.
12
DISC insert indicator LED
Displays whether a DISC has been inserted.
13
DISC eject
Ejects the inserted disc.
14
RESET
Resets the system - if software locks-up.
INFORMATION
If pressing the power off knob for over 0.8 sec-
ond and the system does not shut down, care-
fully use a straightened paper clip at the
access hole shown next to the right DISC indi-
cator LED to reset the software.
The system power will shut-off and restart.

PRE-OVERVIEW 1-5
PRE-OVERVIEW
1
MODE
Each time the Mode key is pressed, the mode
changes in the following order: FM1
→
FM2
→
AM
→
XM1
→
XM2
→
XM3
→
(DISC)
→
(USB or
iPod)
→
(AUX)
→
(Phone Music)
→
FM1
If an unsupported DISC is inserted, if there is
no disc, or if an external device (e.g. iPod, USB
memory stick, etc.) has not been connected,
the mode will not be recognized and auto-
matically switch to the next mode.
●
Press this key for over 0.8 second to turn the
Audio ON and OFF.
●
Press this key when the Power is turned off
to turn the power on.
2
Seek Up/Down
●
SHORT KEY(less than 0.8 second)
• FM/AM : Receives the previous or next
preset frequency.
• XM Mode : Receives the previous or next
preset channel.
• CD Mode : Plays the previous or next track.
• MP3, USB Mode : Plays the previous or
next file.
• iPod Mode : Plays the previous or next
song.
●
LONG KEY(Over 0.8 second)
• FM/AM Mode : Quickly moves through
the frequencies while the key is pressed.
Once released, automatically searches for
broadcasts which can be received.
• XM Mode : Quickly moves to the previous
or next channel.
• CD Mode : REW/FF the current playing
track.
• MP3, USB Mode : REW/FF the current play-
ing file.
• iPod Mode : REW/FF the current playing
song.
3
Volume Up/Down
Increases or decreases the volume within a
range between 0 ~ 35. Volume for navigation
and voice guidance can be adjusted in the
setup mode.
4
Voice Recognition
Starts Voice Recognition.
5
CALL
Press this key to receive an incoming call.
If pressed while in Audio/Navigation mode,
the bluetooth handsfree screen will be dis-
played.
6
END
Press this key to reject an incoming call.
If pressed while on a call, then the call will be
ended.
Steering wheel remote controller
5
6
1
2
3
4

1-6 PRE-OVERVIEW
PART 1 PRE-OVERVIEW
Basic operation and setting
Turning the Power ON
1. Turn the ignition key onto ACC or ON. If the
system power had been on when the igni-
tion was turned off, the system will turn
back on automatically.
2. If the system power had been off when the
ignition was turned off, the system will
remain off. In this case, press the
PWR/VOL
knob to turn on the system power.
System Power ON
INFORMATION
As system booting starts from the point the
door lock is unlocked, the device may com-
plete booting before the ACC is turned on or
the
PWR/VOL
knob is pressed.
Consequently, the booting screen may not be
displayed upon initially turning on the system
power.
3. Once system booting is complete, the most
recent operated mode will be displayed. For
example, turning on the system will display
FM1 radio mode if the last operated mode
prior to turning off the system had been
FM1 radio mode.
Turning the Power OFF
If the
PWR/VOL
knob is pressed for over 0.8
second, a beep will sound and the system
power will be turned off.
Press the
PWR/VOL
knob for under 0.8 sec-
ond with the system power on to turn the
Audio on and off.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Audio On"
"Audio Off"
INFORMATION
Conducting the following operations while
the AUDIO is off will automatically turn on the
Audio system.
● Pressing the Audio related keys (
FM/AM
,
,
CD/AUX
).
● Inserting a DISC or connecting an external
device.
Turning the Audio ON/OFF
Turning the Power OFF

PRE-OVERVIEW 1-7
PRE-OVERVIEW
Turn the
PWR/VOL
knob in clockwise direc-
tion to increase the volume and counter-
clockwise to decrease the volume.
INFORMATION
● The range of volume adjustment is between
0 ~ 35.
● Adjustments to the volume cannot be made
while the AUDIO is turned off.
Operating typical screen menu
● If a menu button on the screen is pressed,
the corresponding function will begin oper-
ation.
● The same menu button may perform differ-
ent functions depending on the length of
time the button is pressed (under 0.8 sec-
onds or over 0.8 second). For more informa-
tion, refer to the specific function within this
user manual.
● The current operated button will be high-
lighted upon display.
● Buttons which cannot be operated under
the current conditions will be displayed in
disabled state. Pressing a disabled button
will not perform any operation.
Inputting letter by using screen
keyboard
ABC
: Displays the English alphabet keypad.
: Displays the French alphabet keypad.
(if available)
0 - 9
: Displays the number and symbol key-
pad.
Delete
: Deletes the previously inputted let-
ter. Pressing for over 0.8 second will
delete all content.
Done
: The input is completed.
: Restores to previous screen. The input-
ted text will not be saved.
Displaying the list
List
: Even if input is not complete, the
current matching items from the
database will be displayed.
INFORMATION
The number at the upper-right side of the
screen displays the number of current
matches.
Adjusting audio volume
How to operate the screen menu

1-8 PRE-OVERVIEW
PART 1 PRE-OVERVIEW
Selecting an item in a list
󲼱󲼱󲼱󲼱
󲽳 󲽵
: Moves to the next page or previous
page.
󲾨 󲾦
: The
󲾨
button will be displayed if
the text is too long to be displayed
in one button.
Press the
󲾦
button to move the cursor to
the end of the text. Press the
󲾦
button to
move the cursor to the front of the text.
Sorting items from list
Select the desired sorting method to
reorganize the list in accordance to the
selected method.
How to operate menu by voice
command
Conditions for voice recognition system
Most of the functions within the Audio and
Navigation system can be operated by voice.
Please follow the instructions below for opti-
mal voice recognition performance.
󲼱󲼱
● Close all windows and the sunroof. The
voice recognition can be improved when in
a quiet environment.
● Press the voice recognition button and say
the desired voice command after the sound
of the beep.
● The microphone is positioned above the
driver so that voice commands can be said
while maintaining a proper posture.
● Pronounce the voice commands naturally
and clearly as if in normal conversation.

PRE-OVERVIEW 1-9
PRE-OVERVIEW
Giving voice command
1. Press the key on the steering wheel
remote controller.
A voice command window will be displayed
on the lower side of the screen followed by
a "Command please" system voice com-
ment.
2. Once the icon changes into the
icon on the pop-up screen with a beep
sound, say the desired voice command.
[Voice command list], page 4-6.
[ Searching a destination by voice com-
mand], page 4-19.
INFORMATION
Press the key shortly to input the desired
voice command. The system voice instruction
comment will immediately terminate. When
the icon changes into the icon with a
beep sound, it is possible to input voice com-
mands.
Sound setting
Press the
Sound
button on the main screen
of each Audio mode (FM/AM, XM, CD, MP3,
USB, iPod) to display the Sound setting screen.
FAD/BAL
The position of the sound can be adjusted by
using the up-down and left-right (
󲾦
,
󲾨
,
󲽳
,
󲽵
) buttons on the left side of the
screen.
Press the
Center
button to position the
sound in the center of the vehicle.

1-10 PRE-OVERVIEW
PART 1 PRE-OVERVIEW
BASS/MID/TREB
The BASS/MID/TREB can be adjusted by using
the left/right buttons (
󲾦
,
󲾨
) of each con-
trol.
INFORMATION
The Auto Volume Control is a function which
automatically adjusts the volume level in
accordance to changes in vehicle speed.
Touch screen beep ON/OFF
Each time the
Touch screen beep
button is
pressed, the beeping sound that follows each
press on the screen will turn on or off.
Surround ON/OFF
Each time the
Surround
button is pressed, the
vivid three-dimensional sound effects func-
tion are turned on or off.
Display setting
Press the
SETUP
key on the control panel to
display the Setup menu screen.
Press
Display
button to display the Display
Setup screen.
Display mode
Press the button for the desired display mode
fr o m
Automatic
,
Daylight
, a nd
Night
modes. The current selected mode is high-
lighted.
●
Automatic
The display is automatically converted
between Daylight and Night modes in accor-
dance to the on/off state of the vehicle tail-
lights.
●
Daylight
The bright screen is always maintained
regardless of the on/off state of the vehicle
taillights.
●
Night
The dark screen is always maintained regard-
less of the on/off state of the vehicle taillights.
Brightness
Use the left/right buttons (
󲾦
,
󲾨
) for con-
trol to make adjustments.
Display OFF
Press the
Display Off
button.
Display ON
Press anywhere on the black screen. The screen
prior to display setting will be displayed.

PRE-OVERVIEW 1-11
PRE-OVERVIEW
MEMO

PART 2 AUDIO SYSTEMPART 2 AUDIO SYSTEM
PART 2
AUDIO SYSTEM
Operating the radio
󳎺󳎺󳎺󳎺󳎺 2-2
FM/AM Radio 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-2
Listening to the FM/AM radio 󲼶󲼶󲼶 2-2
FM/AM screen and functions󲼶󲼶󲼶󲼶 2-2
Selecting FM/AM broadcast
frequency 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-3
Storing FM/AM preset 󲼶󲼶󲼶󲼶󲼶󲼶 2-4
Scanning FM/AM broadcast
frequency 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-5
XM Radio󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-6
Listening to the XM radio 󲼶󲼶󲼶󲼶󲼶 2-6
XM screen and functions 󲼶󲼶󲼶󲼶󲼶 2-6
Switching the XM mode
(Channel / Category)󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-7
Selecting XM broadcast channel 󲼶󲼶 2-7
Storing XM preset 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-9
Scanning XM broadcast channel 󲼶󲼶 2-9
Operating the CDP  󳎺󳎺󳎺󳎺 2-10
About CDP󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-10
Precautions upon handling discs󲼶󲼶 2-10
For safe and efficient operation󲼶󲼶󲼶 2-10
Supported disc formats󲼶󲼶󲼶󲼶󲼶󲼶 2-11
Disc/Content format compatibility 󲼶 2-12
Inserting/Ejecting disc 󲼶󲼶󲼶󲼶󲼶 2-13
Inserting a Disc 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-13
Ejecting a Disc 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-13
CD 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-14
Listening to CD music 󲼶󲼶󲼶󲼶󲼶󲼶 2-14
CD screen and functions 󲼶󲼶󲼶󲼶󲼶 2-14
Selecting the CD track 󲼶󲼶󲼶󲼶󲼶󲼶 2-15
REW/FF CD track󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-15
Setting Repeat function for
CD music󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-15
Setting Random function for
CD music󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-16
Scanning CD track󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-16
MP3󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-17
MP3 disc related information and
precaution󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-17
Listening to MP3 music󲼶󲼶󲼶󲼶󲼶󲼶 2-18
MP3 screen and functions󲼶󲼶󲼶󲼶󲼶 2-18
Selecting the MP3 file 󲼶󲼶󲼶󲼶󲼶󲼶 2-19
REW/FF MP3 file󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-20
Viewing detail information for
MP3 file 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-20
Setting Repeat function for MP3 file󲼶 2-20
Setting Random function for
MP3 file 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-20
Scanning MP3 file 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-21

AUDIO SYSTEM 2-1
AUDIO SYSTEM
PART 2
AUDIO SYSTEM
Operating external devices 󳎺󳎺 2-22
iPod󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-22
Connecting iPod device󲼶󲼶󲼶󲼶󲼶󲼶 2-22
Listening to iPod music󲼶󲼶󲼶󲼶󲼶󲼶 2-22
iPod screen and functions󲼶󲼶󲼶󲼶󲼶 2-23
Selecting an iPod song 󲼶󲼶󲼶󲼶󲼶󲼶 2-23
REW/FF iPod song󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-24
Setting Repeat function for
iPod song 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-25
Setting Random function for
iPod song 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-25
USB󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-26
USB MP3 related information and
precaution 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-26
Precautions upon handling USB 󲼶󲼶 2-26
Connecting the USB 󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-28
Listening to USB music 󲼶󲼶󲼶󲼶󲼶󲼶 2-28
AUX󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-29
Connecting AUX󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-29
Playing AUX 󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-29
AUX screen󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶󲼶 2-29

2-2 AUDIO SYSTEM
PART 2 AUDIO SYSTEM
Operating the radio
Listening to the FM/AM radio
1. Press the
FM/AM
key on the control panel.
The FM/AM radio band of the most recent
listened station will be displayed.
2. Press th e
FM/AM
key to change th e
desired radio band. Each press will change
the bands in the following order: FM1
→
FM2
→
AM
→
FM1
3. Select the desired broadcast frequency.
[Selecting FM/AM broadcast frequency],
page 2-3.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
" Radio"
"(Radio) AM"
"(Radio) FM"
"(Radio) FM <1 or 2>"
"AM Frequency <530 to 1710>"
"FM Frequency <87.5 to 107.9>"
"AM Preset <1 to 6>"
"FM <1 or 2> Preset <1 to 6>"
FM/AM screen and functions
1
Mode display : displays the FM1/FM2/ AM
modes.
2
SEEK/SCAN/PRESET SCAN/AUTO PRESET
indicator : if SEEK/SCAN/PRESET SCAN /
AUTO PRESET is operating, the switch is
displayed.
1
2
4 5
7
6
3
1
2
c
d e
c
d
e
b
5
a
8
FM/AM Radio
a

AUDIO SYSTEM 2-3
AUDIO SYSTEM
3
STEREO indicator : if the current frequency
is a stereo broadcast, the indicator is dis-
played.
4
Program Service name : displays the program
service name if data is being broadcast.
5
Frequency : displays the current playing
frequency.
6
Program type name : displays the program
type name if data is being broadcast.
7
Radio Text : displays the radio text infor-
mation if data is being broadcast.
8
Frequency Bar : displays the position of
the current frequency within the total fre-
quency range.
a
Preset
buttons : the desired frequency
can be preset and selected.
[Storing FM/AM preset], page 2-4.
b
R-Text
ON/OFF button : turns the Radio
Text information on and off.
INFORMATION
If the
R-Text
is on OFF state, text will not be
displayed even if there is text being transmit-
ted from the broadcast station.
If the
R-Text
is on ON state, the frequency
bar will not be displayed. Even if the
R-Text
in on ON state, text may not be displayed if
text is not being received from the broadcast
station.
c
Auto Store
button : searches the 6 fre-
quencies with the most superior reception
and automatically stores as preset buttons
in corresponding order.
[Storing FM/AM preset], page 2-4.
d
Scan
button : scans all frequencies or
just the preset frequencies for 5 seconds
each.
[Scanning FM/AM broadcast
frequency], page 2-5.
e
Sound
button : adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Sound setting], page 1-10.
Selecting FM/AM broadcast frequency
There are 3 ways to select the broadcast fre-
quency - (a) selecting through preset, (b)
selecting through SEEK, (c) selecting through
manual search.
(a) Selecting a frequency through preset
Press the preset button of the desired broad-
cast frequency.
INFORMATION
●
Press the
∧
or
∨
key on the steering
remote control shortly. The preset frequen-
cies of the current band will be selected in
order.
●
There are 6 preset frequencies each for FM1,
FM2, and AM modes.
[Storing FM/AM preset], page 2-4.
Voice Command
1. Press the key on the steering remote
control.
2. After the beep sound, say a command.
"Preset <1 to 6>"
"Preset Up"
"Preset Down"

2-4 AUDIO SYSTEM
PART 2 AUDIO SYSTEM
(b) Selecting a Broadcast frequency
through SEEK
Press the
∧
SEEK
,
TRACK
∨
keys on the control
panel for less than 0.8 second.
Once the SEEK function is operating (SEEK
indicator blinking), the next or previous
broadcast frequency with superior reception
will be searched automatically.
INFORMATION
●
Press the
∧
SEEK
,
TRACK
∨
keys on the con-
trol panel or steering wheel remote control-
ler for more than 0.8 second to quickly
move to the nearest desired frequency.
Once the button is released, the next fre-
quency with superior reception will be
searched automatically.
●
If the SEEK function is operating, pressing
the
∧
SEEK
,
TRACK
∨
keys on the control
panel again will terminate SEEK operation
and select the current frequency.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Seek Up"
"Seek Down"
(c) Selecting a broadcast frequency
through manual search
Turn the
TUNE
knob on the control panel in
clockwise or counter-clockwise direction.
Each click on the
TUNE
knob will increase or
decrease the frequency by 1 step (FM: 0.2
MHz, AM: 10 kHz).
Storing FM/AM preset
There are 2 ways to store preset frequencies -
(a) storing manually and (b) auto store.
(a) Storing manually
1. Select the desired frequency.
[Selecting FM/AM broadcast frequency],
page 2-3.
Press the preset button to store for over 0.8
second. The frequency will become stored
along with a beep sound.
INFORMATION
Six preset frequencies each for FM1/ FM2/AM
modes can be stored using the above instruc-
tions.
(b) Auto Store
After selecting the desired band, press the
Auto preset
button. The 6 frequencies with
the most superior reception will be stored as
preset buttons in corresponding order.
INFORMATION
If the
Auto preset
button is pressed again
while operating Auto Store, then the Auto
Store operation will be terminated and the
previously played frequency will be restored.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Auto preset"