Hyundai HYUSTR001N User manual

Vibelite Neon LED Flex
Product Code: HYUSTR001N
Installation Instructions 03.2021

PRODUCT SPECIFICATION:
Swallowing may lead to serious injury in as little as 2 hours, due to chemical burns and potential
perforation of the oesophagus.
If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons
Information Centre on 13 11 26 (in Australia) for fast, expert advice.
Examine devices and make sure the battery compartment is correctly secured. Do not use if compartment
is not secure.
Dispose of used button batteries immediately and safely.
The RCM marking of this product applies to AS/NZS CISPR15 (EMC) “Limits and methods of measurement
of radio disturbance characteristics of electrical lighting and similar equipment”. This product is designed
to conform to AS/NZS60598 “Luminaires, general requirements and tests”.
Installation:
Kit includes:
a. 5m (HYUSTR001N) LED Strip
b. 24V DC Power Adaptor
c. 1.5m adaptor lead with the plug
d. Double sided 3M tape for easy installation
e. Remote control with battery
1. Before the installation, please ensure the power is off
2. Ensure that surface is clean and dry prior to applying LED Strip
3. Do not cut the strip as it will impar the IP rating
4. Peel backing off the double sided tape and apply to the surface. Carefully consider placement of the
product due strong adhesive qualities
5. Plug power adaptor into power point
6. To control the Vibelite Neon LED Flex, you can use Smart Life app on your phone or tablet or
alternatively use the remote control
NOTES: Vibelite Neon LED Flex and control device should use the same WiFi connection
Parameter
HYUSTR001N
CCT
RGB
Colour Rendering Index
>80
Total Power
24W
IP Rating
IP65
Voltage Rating
24V DC
Dimmable
Yes
Rated Average Design Life
36,000Hrs
WiFi
2.4Ghz
Dimensions
10mm x 5,000mm
Remote control contains
a LITHIUM COIN type
battery.
WARNING
- KEEP OUT
OF REACH OF CHILDREN

To control the strip via Smart Life app:
Step 1. Download Smart Life app from Apple store or Google Play
Step 2. Open Smart Life app, sign up for a new account or log in with an existing account.
To sign up for new account, please enter either your e-mail or phone number (If you enter your phone
number you will be sent a verification text message).
If you are setting up using a phone number, please enter the verification code that was sent to your phone
and your desired password, then press “Confirm”.
If you are setting up using an email address, please enter your desired password, and press “Confirm”.
Step 3. Pair lights.
On the home page, select the Plus (+) in the top right corner to add a device. Select Lighting and choose
“Light Source (BLE + WiFi), alternatively press “Auto Scan” on top of the page.
Step 4. Connect the Vibelite Neon LED Flex to a power source.
Once connected, the strip will be in pairing mode (rapidly blinking).
Otherwise, to enter pairing mode, turn the bulb on and then off for 3-5 seconds at a time. Do this 3 times.
Step 5. Connect to the Wi-Fi network, enter the password, then select “Confirm”.
The app will start to pair strip to the app. If you get a message that says “Failed to Add” it means that the
connection has failed. You may have to enter the strip into pairing mode again and repeat step 4.
Once globe is connected to the app, you can change the name of the globe.
FUNCTIONS:
1. Colour Temperature:
“White” this will allow you to change the color temperature and brightness
“Colour” this will allow you to choose the colour temperature from up to 16 million colour
combinations
Scenes: there are different pre-set scene modes to choose from or you can create your own by
pressing “Add scene”
2. Countdown: you can set a timer for the strip to turn off after specific period
3. Schedule: you can schedule your strip to turn on or off at certain times of the day
To control the strip via remote control:

ON/OFF
Short press the button to turn on/off the LED light
Press and hold for 5 seconds to enter the networ
k configuration mode, and the
indicator will flash quickly; in the fast flashing state, press and hold for 5 seconds
to enter the hotspot network configuration mode; the network configuration
operation will be completed within 3 minutes
MUSIC
Short press the button to cycle through scenes
Double-click the button to cycle through static, pre-set, music and other modes
Long press the button to enter/exit the music mode
Play/Pause Play or pause
AUTO Click to enter automatic scene mode
SPEED+/-
Brightness+/-
Short press the button to adjust the speed cyclically
Long press the button to adjust the brightness cyclically
MODE+/-
Adjust the scene mode
Color
Temperature+/-
32 preset colors
RGBW Click to switch colors (red, green, blue, white)
WARRANTY
For warranty information please go to: https://www.hyundailighting.com.au/
For inquiries please contact:
Azoogi Pty Ltd
E-mail: [e-mail]
www.hyundailighting.com.au
Licensed by HYUNDAI Corporation Holdings, Korea
Imported/Distributed by Azoogi Pty Ltd