I-Tech NVP1015 User manual

USER
NVP1015 / 1017– 801/1601
1U 15” / 17” LCD
Keyboard Drawer with PS/2 KV
ANUAL

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
1
NVP1015 / NVP1017 User anual
Table of Contents
1. Table of Content P.1
2. Introduction P.2
3. Features P.2
4. Package Contents P.3
5. Optional Accessories P.4
6. Peripheral Products P.4
7. Important Safeguards P.5
8. Structure Diagram P.6
9. Dimension Diagram
N P1015-8/1601 P.7
N P1017-8/1601 P.8
10. LCD Session
LCD Membrane Diagram P.10
LCD OSD Control
Main Menu P.10
Sub Menu P.11-12
Resolution Settings
For Windows P.13
For SUN Servers P.14
11. KV Session
Front iew P.16
Rear iew P.17
Installation Steps P .18
Cascading P.19
12. Start Up P.20
HotKey Command P.20
HotKey Command Operation P.21-22
K M On Screen Display Control
OSD Structure Diagram P.23
OSD Menu Operation P.24
13. FAQ P.25
14. Technical Specification P.26-27

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
2
NVP1015 / NVP1017 User anual
2. Introduction
N P Series is a combination of keyboard, mouse and monitor into a drawer, with features such as
flip-up design, adjustable brackets, built in LCD OSD to provide effective assistant for an
administrator to control PC system.
N P Series provides cost effective for your limited IT budget over using CRT and rack mounting.
Also, it will be space saving for your compact environment rack and effective assistant for an
administrator to control PC system.
3. Features
• Adjustable mounting brackets from 390 to 790mm (front to rear 19”mount)
• Lightweight aluminium construction—with black anodise finish
• Slim Size keyboard with GlidePoint touch pad mouse
• Standard D-Sub 15-pin GA input connector
• Supplied with 12 5A remote power adapter (single power resource)
• Built in On Screen Display controlled by integral membrane switches
• 1U Height, separate sliding screen and keyboard using unique miniature Cyber slides
• Unique monitor flip-up design allows viewing through closed glass door of cabinet.
• Built-in K M switch function for easy controlling and monitoring up to 16 residing servers / platforms
• Support eight characters password protection and search PC server name
• Auto scan mode for monitoring PCs and flexible scan time from 5 ~ 99 seconds
• Hot Pluggable—Add or remove computers without powering down the switch
• Easily switch individual button to select the PC channel using the pushbutton channel selector
switches, Hot keys, or via the On-Screen
Disclaimer
This information is subject to change without notice. The producer of this manual accepts no
responsibility for damage or claims, resulting from misuse or misinterpretation

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
3
NVP1015 / NVP1017 User anual
4. Package Contents
LCD Monitor Drawer with PS/2 K M Switch 1 Piece
User Manual 1 Piece
DC Power Adapter 1 Piece
Power Cord 1 Piece
Mounting Bracket 1 Pair
Fasteners 4 Pieces
ND-6 3-in-1 K M cable 8 Pieces
Before Unpacking
It is very important to locate the LCD Keyboard Drawer in a suitable environment.
• The surface for placing and fixing the LCD Keyboard Drawer should be stable and level
or mounted into a suitable cabinet.
• Make sure the place has good ventilation, is out of direct sunlight, away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
• Convenience for connecting the LCD Keyboard Drawer to the related facilities should
be well considers too.
Unpacking
The LCD Keyboard Drawer comes with the standard parts shown as above. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the
supplier immediately.

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
4
NVP1015 / NVP1017 User anual
5. Optional Accessories
KV Cable
ND-6 / 10 / 15 6ft / 10ft / 15ft PS/2 3-in-1 cable
Cascade Cable
NA-2 / 6 / 10 / 15 2ft / 6ft / 10ft / 15ft PS/2 3-to-3 cable
Conversion Adapter
SUN-31 SUN / iMAC USB to PS/2 adapter
Others Video Input
12 / 24 / 48 DC Power Supply
6. Peripheral Products
odel Description
N -401 / N -801 / N -1601 N -401 / N -801 / N -1601
N -1602 16-Port 2-Console PS/2 K M switch
N -S801 / N -S1601 8-Port /16-port USB K M switch
N -S1602 16-port 2-Console USB K M switch
N -101 CAT.5 PS/2 K M extender

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
5
NVP1015 / NVP1017 User anual
7. Important Safeguards
What the warranty does not dover
1. Any product, on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
b) Repair or attempted repair by anyone not authorized by us.
c) Any damage of the product due to shipment.
d) Removal or installation of the product.
e) Causes external to the product, such as electric power fluctuation or failure.
f) Use of supplies or parts not meeting our specifications.
g) Normal wear and tear.
h) Any other causes which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
Please read all of these instructions carefully before you use the device.
Save this manual for future reference.
• Unplug the LCD Keyboard Drawer from the power outlet before cleaning.
• Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a neutral
detergent (e.g. clean water) and squeeze it tight, then clean the screen slightly with it.
• Do not expose the LCD Keyboard Drawer directly to rain, water, moisture or sunlight.
• Avoid pressure on the LCD screen to prevent permanent damage to the display.
• Do not attempt to service the device yourself. Improper operation may void your
warranty. Refer all servicing to qualified service personnel.
•
Safe storage environment of the LCD Keyboard Drawer is ranging between –20
o
C
and 60
o
C. Permanent damage could occur if the LCD Keyboard Drawer is stored
outside the safe range.
• Unplug the LCD Keyboard Drawer immediately and call qualified service
personnel under the following conditions:
1. If the monitor has been exposed to rain, liquid or water.
2. If the monitor has been dropped or the casing has been damaged.

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
6
NVP1015 / NVP1017 User anual
8. Structure Diagram
1. PS/2 keyboard
2. Aluminium front panel
3. Class A active matrix TFT LCD panel
4. Rear metal case
5. Analog to digital signal converter board
6. LCD inverter
7. LCD membrane
8. Ball bearing telescopic slides with stopper
9. Adjustable mounting bracket
10. KV membrane & KV switch board

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
7
NVP1015 / NVP1017 User anual
9. Dimensions Diagram
NVP1015-8/1601 1U 15” LCD Keyboard Drawer with PS/2 K M

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
8
NVP1015 / NVP1017 User anual
9. Dimensions Diagram
NVP1017-8/1601 1U 17” LCD Keyboard Drawer with PS/2 K M

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
9
NVP1015 / NVP1017 User anual
LCD
Session

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
10
NVP1015 / NVP1017 User anual
10. LCD Session
LCD embrane diagram
ain enu
Bright / Contrast
• To enter into the Bright, Black level & Contrast sub-menu
Auto Adjust
• To perform automatic optimisations of all functions
• An “ Adjusting” message is displayed during the process
Phase / Clock
• To enter into the phase & clock sub menu
H/V Position
• To enter into the H/ Position sub-menu
ISC
• To enter into the MISC sub-menu
Reset
• Reset to the default factory settings

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
11
NVP1015 / NVP1017 User anual
10. LCD Session
Bright / Contrast
1. Brightness
• To perform brightness adjustment of the input RGB signal
• Use the Left & Right button to adjust and button to “Brightness” 2.
2. Contrast
• To adjust the contrast level of the input signal
• Use the Left & Right button to adjust and button to “Contrast”
Phase / Clock
1. Phase
• To adjust input video sampling clock’s phase
• Use the Left & Right button to adjust and button to “Phase”
2. Clock
• To adjust input video sampling clock
• Use the Left & Right button to adjust and button to “Clock”
H/V Position
1. H.Position
• To adjust the horizontal size of the frame
• Use the Left & Right button to adjust and button to “H.position”.
2. V.Position
• To adjust the vertical position of the frame
• Use the Left & Right button to adjust and button to “ .position”.

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
12
NVP1015 / NVP1017 User anual
10. LCD Session
ISC
1. Information
• The first header row shows the current resolution setup
• The second header row shows the horizontal frequency of the current input
signal
• The third header row shows the vertical frequency of the current input signal
2. OSD Timer
• To modify the duration of the OSD time-out
3. Color
a) 5500K
• Select Colour Temp at 5500K
b) 6500K
• Select Colour Temp at 6500K
c) 9500K
• Select Colour Temp at 9500K
d) User
• Change Colour Temp by manual
4. Language
• To select the language of OSD menu 7 Languages :
(1) English
(2) Japanese
(3) Chinese
(4) German
(5) Francais
(6) Espanol
(7) Italiano

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
13
NVP1015 / NVP1017 User anual
10. LCD Session
Resolutions Settings
For icrosoft Windows
Step 1 – Press right click on the desktop
Step 2 – Choose “Properties”
Step 3 – Change the “Screen Resolution”
Step 4 – Change the “Screen refresh rate”

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
14
NVP1015 / NVP1017 User anual
10. LCD Session
Resolutions Settings
For SUN Servers
• Resolution configuration procedures should be run by qualified SUN
server administrator
• Sun Servers are using resolution at 1152 x 900 x 76Hz.
• Supported resolution mode for 15” LCD:
• 1024 x 768 x 70/75Hz
• Supported resolution mode for 17” LCD:
• 1280 x 1024 x 75Hz
• You need to change the Sun Server resolution before you connect to
LCD Display.
• Please do the following procedures to change the resolution settings :
1. As root:
You may find the following comment 7user/sbin/m64config”.
2. To view current resolution:
Type 7user/sbin/m64config - prconf.
3. To change to 1024x768 @ 70MHz:
Type 7user/sbin/m64config - res 1024x768x70 now”.
4. The screen will be rubbish.
5. Then type “pkill Xsun”.
And Type “pkill Xsession” to restart the Xsession.
Note : Remember to RESTART the server after these processes.
• Under Common Desktop Environment (CDE).
• To change the OpenBoot resolution, you can type the following command in
OK prompt.
1. In OK prompt, type “setenv output-device screen:r1024x768x70”.
2. Type “printenv” to confirm the resolution has been changed to 1024x768x70Hz.
3. Then type, “reset” to restart the system.
Note : Remember to RESTART the server after these processes.

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
15
NVP1015 / NVP1017 User anual
K M
Session

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
16
NVP1015 / NVP1017 User anual
11. KV Session
Front View
LED Indication
Selected Channel - Displayed channel on monitor & red in LED.
Channel select button - Press to select channel from 1 – 8.
Shift button - Press & Hold follow with a channel button to select channel from 9 – 16.
Online Channel - Green LED state the PC has connected and power on.
Bank no. - Display the Bank no. from 1 – 8.
Bank button - Select the bank from 1 – 8 (for cascade only).

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
17
NVP1015 / NVP1017 User anual
11. KV Session
Rear View
DC Power -connect to external 12 DC power adapter.
Cascade Port -connect to additional K M switch for channel expansion.
Channel Port -connect to PC computer with ND-6 3-in-1 K M cable.

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
18
NVP1015 / NVP1017 User anual
11. KV Session
Installation Steps
Before installation, please make sure all of peripherals and computers have
been turned off.
1. Connect the 3-in-1cable with 2 mini-din 6-pin connectors and a
HDDB 15-pin connector to the computer ports.
2. Connect another end of the cable to K M switch.
3. Plug the power adapter included to the LCD Keyboard Drawer.
4. After powering on computers and finishing the boot-up process, you
can start LCD keyboard drawer with PS/2 K M switch.
Note: Please don’t switch the PC port (i.e. Don’t press the push button of
K M switch or run hot key) during the computers are under
boot-up.

i-Tech Company LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
19
NVP1015 / NVP1017 User anual
11. KV Session
Cascading
Using NA-6 PS/2 K M cable to connect from Bank 1’s “Cascade port” to
Bank 2’s “Console port”. After connected please press “Bank” & “Channel”
button on the front of the PS/2 K M switch to reset the PS/2 K M switch.
Cascade level ax. : 8 level
• Max. PC connection is 128 or with additional 122 PCs.
• All PS/2 K M switch is compatible & can cascade with each other.
• Using NA-6 PS/2 K M cable to cascade.
• Normal distance from one PS/2 K M to another is 15 feet.