i3-TECHNOLOGIES iMO-LEARN MDM User manual

iMO-LEARN - MDM
Quick Start Guide
2
Product Overview
Set Up
3
Software Installation
Download & Install
iMO-CONNECT software
from
i3-learning.com/imo-connect/download
Follow the instructions of the iMO-CONNECT installer
USB micro
charging port
Bluetooth
dongle
USB cable
1
on/off
Status
indicators
Insert the Bluetooth USB Dongle into your computer.
20160819_MDM_MANUAL_ENG.indd 1 19/09/16 09:25

4Bluetooth Connection
5iMO-LEARN Cube
Insert the iMO-LEARN MDM in the iMO-LEARN Cube
with the i3-logo facing the yellow sticker
6Recharging
Additional information
Power ON all the iMO-LEARN modules.
The status indicators on the iMO-LEARN
modules will fl ash when connected.
Open the iMO-CONNECT software
that will search for
the iMO-LEARN modules near you.
Recharge the iMO-LEARN MDM by the Micro-USB cable.
USB port of any device. USB power adapter
5V - max 2A
(not included)
Docking Station for iMO-LEARN
(not included)
Through one of the following methods:
The battery is fully charged when the
battery status-indicator is green.
Charging time: 30 minutes.
Find additional
information about
iMO-LEARN on the
i3-learning website.
i3 TECHNOLOGIES N.V.
Kleine Schaluinweg 7, B-3290 DIEST, BELGIUM
© 2016 i3-Technologies N.V.
iMO-LEARN, iMO-CONNECT,
i3-Technologies and the i3 LOGO
are trademarks of i3 GROUP and it’s
companies. All other trademarks are the
property of their respective owners.
20160819_MDM_MANUAL_ENG.indd 2 19/09/16 09:26