i3-TECHNOLOGIES i3SYNC User manual

i3SYNC TRANSMITTER
Quick start guide

Thank you.
Enjoy the purchase of your i3SYNC TRANSMITTER.
Lets see what’s in the box.
i3-Technologies is conscious about the environmental impact of the products that we produce. Therefore we would
like you to support us in this mission by disposing all packaging according to any local regulations.
To check if we packed your product correctly, please verify if all these items are present:
i3SYNC |WHAT’S IN THE BOX
1x I3SYNC Transmiter 1x User guide
Is something missing
or does it look damaged?
We’re so sorry, please contact our support service
on [email protected], or contact your
local reseller.

i3SYNC |BUTTONS
USB-C
F1 button: Hold down to reboot
the device.
Main button: pairing / start
mirroring / stop mirroring
Discription of functions.
What does every button do when I push it.
HMDI-USB Transmitter USB-C Transmitter
i3SYNC |BUTTONS
HDMI
USB
Mode Switch: switch presentation
mode / Video mode
F1 button: snapshot in
presentation mode / video mode
Main button: pairing / start
mirroring / stop mirroring

LED-light.
What does all the LED colours mean.
i3SYNC |LED
Discription of functions.
What does every button do when I push it.
Receiver
i3SYNC |BUTTONS
HDMI OUT
Micro USB
Slide Switch: overwrite on/off
Main button: for pairing with
transmitter
F1 button: for firmware update
Micro SD Card slot: for firmware
update
Status Color LED Action
Standby Red Lights up constantly
Pairing Green Blink
Paired and Ready Green Lights up constantly
Mirroring Blue Lights up constantly
Error Red Blink
FW update White Blink

How to use.
First-time usage
i3ALLSYNC |USE
1. Connect the i3SYNC receiver to your display.
2. Connect the i3SYNC transmitter to your laptop.
3. Wait for a constant green light of the main button
from the transmitter.
4. Press the main button to mirror, the main button
will change into blue.
i3SYNC |CONNECT
How to install.
How to connect your i3SYNC TRANSMITTER and start working with it.
Receiver
1 Connect a HDMI cable from a display to the HDMI OUT port of the Receiver.
2 Connect the micro USB cable for power supply.
3 The device will automatically start up after inserting the Power Supply.
Transmitter
1 Connect the USB-C / HDMI & USB cable into your laptop or other device.

Important warranty information.
Our i3TOUCH EX devices are equipped by default with a 5 year warranty. If you however have acquired the
interactive display for educational purposes, this warranty can be extended.
i3ALLSYNC |WARRANTY
WARRANTY EXTENSION FOR SCHOOLS
You can register your product for an extended warranty if you are an educational insitution.
If you are a corporate institution, please contact your reseller.
Please note that the warranty extension must be registered within 30 days after delivery of
the i3 product through the form found on this page:
i3-technologies.com/en/get-support/warranty/
i3ALLSYNC |PAIR
How to pair.
When using the i3SYNC Transmitter for the first time:
1. Press the main button of the receiver and transmitter simultaneously.
2. Transmitter and receiver are blinking green during the pairing process.
3. When the pairing is succesful, the receiver and transmitter will have a
constant green light.

[email protected]www.i3-technologies.com
VERSION:20180620