IASUS 500K User manual

Congratulaons on your purchase of the 500K Headset.
The 500K Headset provides the ulmate in comfort, clarity,
and reliability. Featuring a durable build and a lightweight
acousc coil earpiece adapted from the headsets used by
Secret Service agents, the 500K sets a new performance
standard for mobile headset communicaon.
The 500K system consists of the acousc coil earpiece, PTT,
acousc coil length adaptor, le and right contour
earpieces, and an oponal canal p earpiece.
You must register your product to be eligible for warranty
service. To register online, please visit the IASUS Concepts
website at www.iasus-concepts.com/registraon.html. To
receive warranty service, you will need to provide a copy of
your dated sales receipt to conrm warranty status. Please
retain the original for your records.
Getting Started
A, A1 Acousc coil and ear wrap
BSpeaker and clip
CAcousc coil earpiece
C1 Contour earpieces (ear-specic, marked L & R)
C2 Canal p earpiece
DPTT switch (Answer/end call buon)
EMicrophone
FPTT clip
GVolume dial
HCoiled wire
I Adaptor (plugs into headset jack of device)
Setting up the 500K
Before using the 500K, you may need to adjust the length of the
acousc coil. To do so, simply use a pair of pliers to unscrew the
earphone speaker and the acousc coil (B) and take out the coil.
Using a pair of scissors, cut the coil to the desired length. We
recommend cung no more than 1cm at a me. Insert the metal
adaptor and connect the two piece of the coil. Then, push the coil
back into the screw mouth and screw the coil back into the speak-
er base.
Note: Please check the acousc coil is to your desired length
before cung.
You can also choose to use a contour earpiece (C1) or a canal p
earpiece (C2). These earpieces will form to the shape of your ear
allowing for beer t and greater comfort. In order to use these
earpieces, simply remove the silicon earpiece (C) and replace with
the contour or canal p earpiece.
To begin using your 500K, select which ear you prefer to wear it
on. If desired, aach the le or right contour earpiece. Place the
acousc coil ear wrap (A1) over your ear and insert the earpiece
into your ear. The earpiece should t snugly. Aach the clip (B)
to the back of your clothing. Many prefer to aach it on the back
of the collar.
The PTT switch (D) aaches using the clip (F) to your preferred
posion. It should be posioned with the microphone hole (E)
facing your mouth.
The coiled wire (H) should fall from the answer/end call buon
and drape close to your body. The coiled wire can be worn
underneath clothing for added discreon. Finally, the adaptor (I)
aached to the answer/end call buon should be plugged into the
headset jack of your communicaon device.
Use and Care
Mobile phones: To answer a call, simply press the answer/end call
buon once. To hang up a call, press the answer/end call buon
again. There is no need to speak loudly, as the microphone is
sensive enough to pick up your normal speaking voice. To pause or
play audio, press the answer/end call buon once. To skip tracks,
double click the buon. The volume can be adjusted by turning
volume dial (G).
It is dangerous to operate a vehicle while using a mobile phone.
Please follow local regulaons on driving and cell phone use.
Two-way radios: To connect to your radio and begin communicaons,
push and hold the PTT (D) buon while you speak. When you are
nished speaking, release the buon to end transmission. You DO
NOT need to press the PTT to receive incoming communicaons.
There is no need to speak at high volumes as the microphone is
sensive enough to pick up your normal speaking voice. The volume
can be adjusted with the volume dial (G).
Troubleshooting
Problem Check to make sure that…
No sound … the communicaon device is on and
funconing properly.
… the volume dial on the PTT is not set too low.
… the plug into your device is fully inserted.
PTT doesn’t work … the PTT buon is being fully depressed.
… the plug into your device is fully inserted
… your phone is powered on and
funconing properly.
... the 500K is compable with your radio or
phone. For more compability informaon,
check with your IASUS Concepts dealer or visit
the IASUS Concepts website.
... your phone is on and funconing properly.
... you have selected the music playback
applicaon on your phone and it is working
properly.
... the adaptor plug is fully inserted into your
phone’s jack.
500K Headset
PTT won’t
control music
playback

2-Year Limited Warranty
IASUS Concepts Limited warrants that the 500K Headset sold by IASUS
Concepts or its authorized agents is free from defects in materials and
workmanship under normal use for one year. This warranty is only applica-
ble to the original purchaser in possession of a dated sales document re-
ceipt that includes the name of the company from which it was purchased.
This warranty is in lieu of and excludes all other warranes, expressed or
implied, including any implied warranty of merchantability or tness, and of
any other obligaon on the part of IASUS Concepts Limited.
WHAT THIS WARRANTY DOES NOT COVER
- Damage from improper operaon, misuse, neglect such as dropping the
product onto hard surfaces, contact with extreme humidity or heat, or
acts of nature (lightning, oods, power surges etc.).
- Products that may have been tested, adjusted, installed, maintained,
repaired or altered in any way by persons not expressly approved by IASUS
Concepts Limited.
- Cords that are stretched, burned, torn, or cut.
- Products purchased more than 12 months previous to the current date.
- Products that are not accompanied by a valid proof of purchase.
TO REGISTER FOR YOUR WARRANTY
You must register your product to receive warranty service. To do so and to
view detailed informaon about our warranty service, please visit hp://
www.iasus-concepts.com/nt/support.htm.
TO GET WARRANTY SERVICE FROM IASUS CONCEPTS
Please contact our customer service department via our website. Once you
have done so, you will receive instrucons on how to ship the products to
IASUS Concepts or to one of our designated service centers. If instructed to
ship the product, you must ship it with freight, dues, and insurance prepaid.
Regardless of where you are instructed to ship your product, you must
include:
• A copy of your dated sales document receipt.
• A fully completed Return Materials Authorizaon (RMA) form. You can
download a copy of the RMA on the IASUS Concepts website.
• Payment for any services or repairs not covered by the warranty. This will
have been predetermined with your customer service representave.
LEGAL INFORMATION
There is no informal dispute selement mechanism available. This warranty
gives you specic legal rights, and you may also have other rights, which vary
geographically. Some areas do not allow limitaons on how long an implied
warranty lasts and/or do not allow the exclusions or limitaons or consequen-
al damages. If this is true for your area, the above limitaons or exclusions
may not apply to you. IASUS Concepts shall not be liable for any special or
consequenal damages or for loss or expense directly or indirectly arising from
use of the product, inability to use the product in combinaon with other
equipment, or from any other cause. IASUS Concepts reserves the right to
make changes in the design of the product and to make addions or improve-
ments to it without incurring any obligaon to modify any products previously
sold.
500K Headset
User’s Manual
To register your product for
warranty service
Please visit the following site :
www.iasus-concepts.com/registraon.html