IBASE Technology IP400 User manual

IP400
ETX Baseboard
USER’S MANUAL
Version 1.0

ii IP400 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Pentium M are registered trademarks of Intel
Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.

IP400 User’s Manual iii
Table of Contents
Introduction.......................................................1
IP400 Specifications............................................................1
Board Dimensions...............................................................2
Installations.......................................................3
Installing the CPU Module..................................................4
Setting the Jumpers .............................................................5
Connectors on IP400...........................................................8

iv IP400 User’s Manual
The IP400 Baseboard

INTRODUCTION
IP400 User’s Manual 1
Introduction
IP400 Specifications
[
Product Name IP400 (for COM ETX module)
Form Factor Flex ATX for COM ETX CPU module
Battery Lithium Battery for real time clock
Audio Derived from COMETX Module AC97 Codec ALC655 w/ 6
channels (Line-out, Line-in, Mic.) + NS LM4940 8ohm 2W stereo
audio power amplifier
USB Derived from COMETX Module, pin header (8 ports)
IDE Derived from COMETX Module, one channel Compact Flash Type
II and DOM
VGA Derived from COMETX Module, DB15 connector
LVDS Derived from COMETX Module, DF13 connector x 2
TV-Out Derived from COMETX Module, composite connector
LAN Derived from COMETX Module, 10/100BT LAN1
Marvell 88E8053 PCI-e Gigabit LAN controller x1 for LAN2
Super IO Winbond LPC I/F SIO W83627EHF: Parallel x1, COM1, COM2
(RS232), Slim FDC 1.44MB, IrDA x1, PS/2 KB/Mouse & hardware
monitor (3 thermal inputs, 4 voltage monitor inputs, VID0-4, 3 fan
headers)
2nd Super IO (option) Fintek F81216D for COM3, 4 (RS-232)
Digital I/O Supports 4 in and 4 out w/ pin header
Watch-Dog Timer Yes (256 segments: 0, 1, 2,..., 255 sec/min)
Edge Connector
(With the same I/O
shield w/ IP400)
DB15 + DB9 stack connector x1for VGA & COM1
Dual USB stack connector for USB1, 2
Dual RJ45 stack connector x1 for LAN1, 2
PS/2 DIN connector x1
RCA connector x3 for Audio (Line-out, Line-in & Mic)
SPDIF connector x1
S-Video connector x1
RCA connector x1 for TV-Out
Onboard Connector /
Header 44-pin header x1 for HDDs & DOM
DF13 x2 for LVDS
SATA connector x2 for two SATA HDDs
5x2 pins header x3 for COM2~4
4x2 pins header x3 for USB3~8
34-pin box-header x 1 for Floppy
26-pin box-header x 1 for Printer
Expansion Slots PCI-e 16-lane slot x1
PCI-e 1-lane slot x1
PCI (32-bit) slot x2
PCB Layer 4 layers
Board Size 7.5” x 9”

INTRODUCTION
2 IP400 User’s Manual
Board Dimensions

INSTALLATIONS
IP400 User’s Manual 3
Installations
This section provides information on how to use the jumpers and
connectors on the IP400 in order to set up a workable system. The topics
covered are:
Installing the CPU Module..................................................4
Setting the Jumpers .............................................................5
Connectors on IP400...........................................................8

INSTALLATIONS
4 IP400 User’s Manual
Installing the CPU Module
The IP400 board supports COM Express CPU module such as the
ET810. Below is a picture showing how the CPU module and the
heatsink should be installed on the IP400 baseboard. There are five holes
on the IP400 that can be used to screw the three parts together – the
heatsink, the CPU module and the baseboard.

INSTALLATIONS
IP400 User’s Manual 5
Setting the Jumpers
Jumpers are used on IP400 to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on IP400 and their respective functions.
Jumper Locations on IP400............................................................ 6
JP2, JP3, JP4: ATX Power On Control.......................................... 7
JP5: CompactFlash Slave/Master Selection ................................... 7
[JP6: LCD Panel Power Selection................................................... 7

INSTALLATIONS
6 IP400 User’s Manual
Jumper Locations on IP400
Jumpers on IP400 ............................................................................ Page
Jumper Locations on IP400 ...................................................................6
JP2, JP3, JP4: ATX Power On Control .................................................7
JP5: CompactFlash Slave/Master Selection...........................................7
[JP6: LCD Panel Power Selection ..........................................................7