IBASE Technology MI985 User manual

MI985
Intel ®5th Generation Core / QM87 PCH
Mini ITX Motherboard
USER’S MANUAL
Version 1.0

ii MI985 User’s Manual
Acknowledgments
AMI is a registered trademark of American Megatrends Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Intel® 5th Generation Core DC/QC Processor are
registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Fintek is a registered trademark of Fintek Electronics Corporation.
All other product names or trademarks are properties of their
respective owners.

MI985 User’s Manual iii
Table of Contents
Introduction.......................................................1
Product Description.............................................................1
Checklist..............................................................................1
MI985 Specifications..........................................................2
Board Dimensions...............................................................4
Installations.......................................................5
Installing the Memory.........................................................6
Setting the Jumpers.............................................................7
Connectors on MI985........................................................12
BIOS Setup.......................................................25
Drivers Installation......................................45
Intel Chipset Software Installation Utility ........................46
VGA Drivers Installation..................................................48
Realtek HD Audio Driver Installation ..............................51
LAN Drivers Installation...................................................53
Intel® Management Engine Interface...............................56
Intel® USB 3.0 Drivers.....................................................59
Appendix............................................................62
A. I/O Port Address Map ..................................................62
B. Interrupt Request Lines (IRQ)......................................63
C. Watchdog Timer Configuration ...................................64

iv MI985 User’s Manual
This page is intentionally left blank.

INTRODUCTION
MI985 User’s Manual 1
Introduction
Product Description
The MI985 Mini ITX motherboard is based on the latest Intel®QM87
chipset. The platform supports the 5th Generation Intel®Core processor
family that features an integrated dual-channel DDR3L memory
controller as well as a graphics core.
The latest Intel®processors provide advanced performance in both
computing and graphics quality. This meets the requirement of customers
in the gaming, POS, digital signage and server market segment.
The QM87 platform is made with 22-nanometer technology that supports
Intel’s first processor architecture to unite the CPU and the graphics core
on the transistor level. The MI985 Mini ITX board utilizes the dramatic
increase in performance provided this Intel’s latest cutting-edge
technology. Measuring 170mm x 170mm, the MI985 offers fast 6Gbps
SATA support, USB3.0 and interfaces for DVI-D, DVI-I, LVDS and DP
displays.
Checklist
Your MI985 package should include the items listed below.
The MI985 Mini ITX motherboard
This User’s Manual
1 CD containing chipset drivers and flash memory utility
Serial ATA cable
IO shield

INTRODUCTION
2 MI985 User’s Manual
MI985 Specifications
Product Name
MI985AF [Support iAMT]
**MI985AF is default model name on PCB**
Form Factor
Mini-ITX
CPU Type
Intel®5th Gen. CoreTM mobile processors (14nm monolithic)
FCBGA1364 , TDP = 47W (QC)
Package size = 37.5 mmx 32 mm x 1.84mm
CPU Speed
Intel® CoreTM i7-5850EQ@ 2.7G ~ 3.4GHz [MI985AF-Q27e]
Intel® CoreTM i7-5700EQ@ 2.6G ~ 3.4GHz [MI985AF-Q26]
Cache
6MB
Chipset
Intel®DH82QM87 PCH
Package size =20 mm x 20 mm x 1.573mm, TDP = 2.7W
BIOS
AMI BIOS
Memory
Intel®5th Gen. CoreTM mobile processors integrated memory
controller
Supports dual channel DDR3L-1333/160[email protected]
SO-DIMM socket x 2 (Non-ECC type, unbuffered)
Maximum capacity = 16GB
VGA
Intel®5th Gen. CoreTM mobile processor integrated GPU (GT3e or
GT2)
Supports 3 independent displays:
DVI-IX 1 (Thru port B, via VGA@ PCH+ Level shifter ASM1442K)
DVI-D x 1 (Thru port C, with level shifter ASM1442K)
DisplayPort x 1 (Thru port D)
LVDS (Thru eDP, via NXP PTN3460)
LAN
1. Intel® I218LM GbE PHY ** Package = 6mm x 6mm, QFN48**
2. Intel®I211AT as 2nd GbE
USB
USB 2.0 host controller inside QM87 PCH, support 8ports
- 2 ports in the rear panel
- 4 ports via onboard pin header
- 2 ports via MiniPCIe sockets
USB 3.0 host controller inside QM87 PCH, supports 4 ports
-4 ports in the rear panel
Serial ATA
Intel®QM87 PCH built-in SATA controller, supports total 6 ports
4x SATA (3.0) 6Gbps & shared mSATA for 1 port (SATA port #5)
2x SATA (2.0) 3Gbps
Audio
Intel®QM87 PCH built-in High Definition Audio controller + Realtek
ALC892 w/ 7.1 channels
LPC I/O
Fintek F81866AD-I (128-pin LQFP [14mm x 14 mm])
-COM #1 (RS232/422/485) supports ring-in with power @500 mA
(selectable for 5V or 12V) [EXAR SP339EER1 232/422/485
transceiver x 1 for jumper-less]
-COM #2 (RS232 only), support ring-in with power @500 mA
(selectable for 5V or 12V)
-COM #3~COM #6 (RS232 only)
Hardware Monitor (2 thermal inputs,4 voltage monitor inputs & 2 Fan
headers)
-CPU fan x1 (PWN Fan type, 4-pin connector)
-SYS fan x1 (PWM Fan type, 4-pin connector)
Digital IO
4 in & 4 out
TPM 2.0
Infineon SLB9665 [C01Z9665TT2007000P]
iAMT
Intel®Active Management Technology ver.9.1

INTRODUCTION
MI985 User’s Manual 3
Expansion Slots
- PCI-Express (16x) x1 [Gen 3.0 PEG]
- Mini PCI-Express x 2 port [Full-sized], both support USB 2.0
- One slot supports mSATA (6Gbps)
Edge Connectors
Dual DB9 stack connector for COM #1 / #2
DVI-D + DVI-I stack connector x 1
DisplayPort + dual USB (2.0) stack connector x 1
RJ-45 + dual USB (3.0) stack connector x 2
Triplet type Jack 3 x 1 for HD Audio
Onboard
Header/Connector
4 ports x SATA III [Blue color] (One port shared with mSATA)
2 ports x SATA II
DF-11 8-pin connector x 2 for 4 ports USB 2.0
DF-20 20-pin connector x 2 for dual –channel LVDS
eDP LVDS panel connector x 1
2x5 pin-header x 1 for front panel audio [Support 7.1 Channel]
DF-11 10-pin pin-header x 4 for COM3 ~ COM6
2x5 pin-header x 1 for Digital IO
4-pin box header x 1 for LCD backlight control (thru iSMART)
Watchdog Timer
Yes (256 segments, 0, 1, 2…255 sec/min)
System Voltage
ATX standard 20-pin type
4 pin type (+12V only)[For full system loading usage]
Others
-iSMART 3.1
-Onboard CPU cooler
Board Size
170mm x 170mm
Operation System
Windows 7, Windows8, Linux
Certification
CE /FCC/LVD

INTRODUCTION
4 MI985 User’s Manual
[
Board Dimensions

INSTALLATIONS
MI985 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the MI985 in order to set up a workable system. The topics
covered are:
Installing the Memory............................................................................ 6
Setting the Jumpers................................................................................ 7
Connectors on MI985.......................................................................... 12

INSTALLATIONS
6 MI985 User’s Manual
Installing the Memory
The MI985 board supports two DDR3L memory socket for a maximum
total memory of 16GB in DDR3L SODIMM memory type.
Installing and Removing Memory Modules
To install the DDR3L modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR3L module so that the key of the DDR3L module
aligned with that on the memory slot.
2. Gentlypush the DDR3Lmodule inan uprightposition until the clips of
the slot close to hold the DDR3L module in place when the DDR3L
module touches the bottom of the slot.
3. To remove the DDR3L module, press the clips with both hands.
DDR3 Module
Lock
Lock
Lock
Lock

INSTALLATIONS
MI985 User’s Manual 7
Setting the Jumpers
Jumpers are used on MI985 to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on MI985 and their respective functions.
Jumper Locations on MI985.................................................................. 8
JP1: COM2 RS232 RI/+5V/+12V Power Setting.................................. 9
JP2: COM1 RS232 RI/+5V/+12V Power Setting.................................. 9
J13: LCD Panel Power Selection......................................................... 10
J16: Flash Descriptor Security Override (Factory use only)................ 10
J17: Clear CMOS Contents.................................................................. 11
J18: Clear ME Contents....................................................................... 11

INSTALLATIONS
8 MI985 User’s Manual
Jumper Locations on MI985
Jumpers on MI985 ........................................................................... Page
JP1: COM2 RS232 RI/+5V/+12V Power Setting..................................9
JP2: COM1 RS232 RI/+5V/+12V Power Setting..................................9
J13: LCD Panel Power Selection.........................................................10
J16: Flash Descriptor Security Override (Factory use only) ................10
J17: Clear CMOS Contents..................................................................11
J18: Clear ME Contents.......................................................................11

INSTALLATIONS
MI985 User’s Manual 9
JP1: COM2 RS232 RI/+5V/+12V Power Setting
JP1
Setting
Function
Pin 1-3, Short/Closed
+12V
Pin 3-4, Short/Closed
RI
Pin 3-5, Short/Closed
+5V
JP2: COM1 RS232 RI/+5V/+12V Power Setting
JP2
Setting
Function
Pin 1-3, Short/Closed
+12V
Pin 3-4, Short/Closed
RI
Pin 3-5, Short/Closed
+5V
6
2
5
1
6
2
5
1

INSTALLATIONS
10 MI985 User’s Manual
J13: LCD Panel Power Selection
J13
LCD Panel Power
3.3V
5V
J16: Flash Descriptor Security Override (Factory use only)
J16
Flash Descriptor
Security Override
Open
Disabled (Default)
Close
Enabled
1
3
2
1

INSTALLATIONS
MI985 User’s Manual 11
J17: Clear CMOS Contents
J17
Setting
Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS
J18: Clear ME Contents
J18
Setting
Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS
3 1
3 1

INSTALLATIONS
12 MI985 User’s Manual
Connectors on MI985
Connector Locations on MI985 ...........................................................13
CN2: DVI-I and DVI-D Connector......................................................14
CN1: COM1 and COM2 Serial Ports...................................................15
CN4: Display Port................................................................................15
CN5: USB2 #6/#7................................................................................15
CN6: Gigabit LAN (I218) + USB3 #0/#1............................................15
CN7, CN8: SATA3 Connectors...........................................................15
CN9: Gigabit LAN (I211) + USB3 #2/#3............................................15
CN3: eDP Connector (JAE_FI-TD44SB-E-R750) ..............................16
CN10: SATA2 Connector....................................................................17
CN11: SATA2 Connectors ..................................................................17
CN12: HD Audio Connector................................................................17
CN13: SATA3 Connector....................................................................17
CN14: SATA3 Connector....................................................................17
JP3, JP4: LVDS Connectors (LVDS2, LVDS1)..................................17
JP5: LCD Backlight Connector............................................................18
JP6, JP8: USB2 #8/#9, USB2 #4/#5 Connectors.................................18
J1, J2, J3, J4: COM6, COM5, COM3, COM4 RS232 Serial Ports......19
J5: ATX Power Supply Connector.......................................................19
J6: ATX 12V Power Connector...........................................................20
JP7: LPC debug Connector (Factory use only)....................................20
JP9: SPI Flash Connector (Factory use only).......................................20
J7: PCIE1 Configuration......................................................................21
J8: Digital I/O Connector (4 in, 4 out).................................................21
J10, J11: DDR3L SO-DIMM Socket...................................................21
J12: LVDS/eDP Select.........................................................................22
J21: Audio Pin Header for Chassis Front Panel...................................22
J22: Front Panel ...................................................................................23
CPU_FAN1: CPU Fan Power Connector ...........................................23
SYS_FAN2: System Fan Power Connector (DC/PWM Auto-Detect).24
J14: Mini PCIE/mSATA (share with CN7) Connector........................24
J15: Mini PCIE Connector...................................................................24

INSTALLATIONS
MI985 User’s Manual 13
Connector Locations on MI985

INSTALLATIONS
14 MI985 User’s Manual
CN2: DVI-I and DVI-D Connector
Signal Name
Pin #
Pin #
Signal Name
DATA 2-
1
16
HOT POWER
DATA 2+
2
17
DATA 0-
Shield 2/4
3
18
DATA 0+
DATA 4-
4
19
SHIELD 0/5
DATA 4+
5
20
DATA 5-
DDC CLOCK
6
21
DATA 5+
DDC DATA
7
22
SHIELD CLK
Analog VSYNC
8
23
CLOCK -
DATA 1-
9
24
CLOCK +
DATA 1+
10
C1
Analog Red
SHIELD 1/3
11
C2
Analog Green
DATA 3-
12
C3
Analog Blue
DATA 3+
13
C4
Analog HSYNC
DDC POWER
14
C5
A GROUND2
A GROUND 1
15
C6
A GROUND3
[
Signal Name
Pin #
Pin #
Signal Name
DATA 2-
1
16
HOT POWER
DATA 2+
2
17
DATA 0-
Shield 2/4
3
18
DATA 0+
DATA 4-
4
19
SHIELD 0/5
DATA 4+
5
20
DATA 5-
DDC CLOCK
6
21
DATA 5+
DDC DATA
7
22
SHIELD CLK
N.C
8
23
CLOCK -
DATA 1-
9
24
CLOCK +
DATA 1+
10
C1
N.C.
SHIELD 1/3
11
C2
N.C.
DATA 3-
12
C3
N.C.
DATA 3+
13
C4
N.C.
DDC POWER
14
C5
N.C.
A GROUND 1
15
C6
N.C.

INSTALLATIONS
MI985 User’s Manual 15
CN1: COM1 and COM2 Serial Ports
[
Pin #
Signal Name
RS-232
R2-422
RS-485
1
DCD
TX-
DATA-
2
RX
TX+
DATA+
3
TX
RX+
NC
4
DTR
RX-
NC
5
Ground
Ground
Ground
6
DSR
NC
NC
7
RTS
NC
NC
8
CTS
NC
NC
9
RI
NC
NC
10
NC
NC
NC
CN4: Display Port
Signal Name
Pin #
Pin #
Signal Name
LANE0_P
1
11
GND
GND
2
12
LANE3_N
LANE0_N
3
13
GND
LANE1_P
4
14
GND
GND
5
15
AUX_P
LANE1_N
6
16
GND
LANE2_P
7
17
AUX_N
GND
8
18
HPD
LANE2_N
9
19
GND
LANE3_P
10
20
VCC3.
CN5: USB2 #6/#7
CN6: Gigabit LAN (I218) + USB3 #0/#1
CN7, CN8: SATA3 Connectors
CN9: Gigabit LAN (I211) + USB3 #2/#3

INSTALLATIONS
16 MI985 User’s Manual
CN3: eDP Connector (JAE_FI-TD44SB-E-R750)
Signal Name
Pin #
Pin #
Signal Name
3.3V
1
23
TXN0
3.3V
2
24
TXP0
3.3V
3
25
GND
3.3V
4
26
AUXP
3.3V
5
27
AUXN
GND
6
28
NC
GND
7
29
VCC3
GND
8
30
NC
GND
9
31
VCC12
HPD
10
32
NC
NC
11
33
GND
NC
12
34
VCC5
GND
13
35
NC
NC
14
36
Brightness
NC
15
37
BKLT_EN
GND
16
38
VCC12
NC
17
39
VCC3
NC
18
40
GND
GND
19
41
SMB_THRM_CLK
TXN1
20
42
SMB_THRM_DATA
TXP1
21
43
NC
GND
22
44
NC
1
44