IBE BPD-20 User manual

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 1
INSTRUCTION
MANUAL
HYDRAULIC DOUGH
DIVIDER

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 2
MODEL: BPD-20
Contents
1. General Information:
1- Documentation supplied
2- Contact details
3- Use of this manual
4- Intellectual property rights
5- Warranty terms and conditions
6- Machine specifications
7- Machine identification details
8- Main components of the machine
9- Safeguards
10- Intended operation
2. Transport and Installation:
1- Transport
2- Installation
3- Testing & Safeguards
3. Machine Operation:
1- Intended operation
2- Control components
3- Dividing operation
4. Cleaning & Maintenance:
1- Cleaning
2- Maintenance
3- Spare parts list
4- Exploded parts drawings
5- Electrical diagrams
6- Hydraulic control system

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 3
1. General Information:
1.1 Documentation supplied
•Instruction manual
•Spare parts list
•Wiring diagrams
•Hydraulic control diagram
1.2 Contact Details
International Bakery Equipment Pty Ltd (I.B.E.)
Address:
20 Brewer Street
CLONTARF QLD 4019
Australia
Phone:
1300 099 011 or [phone]
E-Mail:
[email protected]
Web:
www.allaboutbakery.com.au
1.3 Use of this Manual
Please read carefully the information supplied in this manual before installing, operating or
carrying out maintenance on this machine.
This manual must be kept in good condition and stored where it can be easily found when
required.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 4
1.4 Intellectual Property Rights
This manual contains copyright information. All rights are reserved. No part of this manual
can be reproduced or photocopied without prior written permission of International Bakery
Equipment Pty Ltd. Permission to use this documentation has only been given to the
customer who this manual has been supplied as part of the machine’s equipment and only for
the purpose of installation, operation and maintenance of the machine to which the manual
refers.
International Bakery Equipment Pty Ltd declares that the information contained herein is in
accordance with the technical and safety specifications of the machine to which the manual
refers. International Bakery Equipment Pty Ltd will not be held responsible for direct or
indirect damage or injury to people or objects resulting from the misuse of this
documentation or the machine for which it has been intended.
The manufacturer reserves the right to introduce technical modifications or improvements
both to the documentation and to the machines without prior notice. The information
contained herein refers in particular to the machine specified in section 1.7 “Machine
identification details “.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 5
1.5 Warranty Terms and Conditions
•Warranty becomes effective from date of delivery.
•Warranty claims may be made by telephone, letter, email or fax.
However, all verbal claims must be confirmed in writing. I.B.E. Pty Ltd Reserves the
right to require return of all claimed defective parts.
•I.B.E. Pty Ltd will ship the part(s) in an expeditious manner as requested.
•Mechanical and Electrical parts are warranted for a period of 12 months from date of
delivery.
•During the first 12 months, I.B.E. Pty Ltd will reimburse the Authorized Agent or
Purchaser for the cost of reasonable labour during normal working hours, 8.00a.m. –
5.00p.m., to remove the failed part(s) and install the replacement(s). After 12 months all
charges will be the Purchasers responsibility.
•After the initial 12 months warranty, any replacement parts are warranted for 3 months
excluding labour.
•This Warranty may not be changed or modified and is not subject to any other Warranty
expressed or implied by any other Agent, Dealer or Distributor unless approved in writing
by I.B.E. Pty Ltd in advance of any claim being filed. This Warranty gives you specific
legal rights which vary from State to State.
Note:
I.B.E. Pty Ltd reserves the right to make the final decision on all Warranty coverage
questions. The decision of the Company is final.
What is covered under this Warranty:
•Parts that fail due to defects in material workmanship.
•Parts that fail due to faulty assembly by I.B.E. Pty Ltd
•Parts that fail due to improper set-up by I.B.E. Pty Ltd
What is not covered under this Warranty:
•Parts that fail due to improper usage or overloading of the machine.
•Parts that fail due to lack of maintenance.
•Parts that fail due to abuse, misuse or modification.
•Mixer attachments - Bowl, whisk, beater and/or hook.
•Normal wear parts, such as, Conveyor belts, ‘v’ belts, ‘o’ rings and scraper and slicer
blades. The Warranty on these parts is, they will be in satisfactory operating condition at
time of delivery and initial start-up. Claims in such parts must be made immediately.
•Loss of time, potential revenue and/or profits.
•Personal injury or property damage resulting from the operation of the machine.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 6
1.6 Specifications
Crate Dimensions:
Length (cm)
Width (cm)
Height (cm)
Weight (Kg)
80
80
138
380
Machine Specifications
Model
Dough Capacity
Kg
Min - Max
Dough Dividing
Weight
g
Min - Max
Motor
H.P.
Dimensions
Weight
Kg
(Net)
L
cm
W
cm
H
cm
BPD-20
3Kg - 16Kg
150g - 800g
2
63.8
66.4
120
325
Power Supply Details:
3 Phase, 10amp 4-pin plug top (supplied)
Note:
The Manufacturer will not be Liable for electrical defects, breakdowns or
malfunctioning of the machine for the non compliance with the power supply stated.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 7
1.7 Machine Identification Details
Type: Hydraulic Dough Divider
Model: BPD-20
Position of Serial Number Identification Plate (Fig 1.1)
Fig 1.1
Note:
When requesting spare parts please state the serial number found on the serial number
identification plate.
Serial number
Identification
plate

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 8
1.8 Main Machine Components
Fig1.2Main Machine Components
Emergency
Stop button
Locking
Handle
Top Cover
Operating
Handle
On / Off
button
Power
Indicator
Main Power
Switch
Dividing
Chamber
Locking
Castors

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 9
1.9 Safeguards
This machine has been fitted with safeguards to ensure safe operation of this machine, in
accordance please ensure the following;
•Do not place foreign objects in the dividing chamber during the dividing process.
•Ensure training in the safe operation of this machine is carried out with all operators.
•Do not wear loose clothing, ties, chains, or watches that could get caught into the
moving parts of the machine.
•Ensure safeguards are in operable order before using the machine on a daily basis.
•Tampering with the safety devices creates hazards for the machine operator, for which
International Bakery Equipment Pty Ltd or its agents will not be liable.
Note:
In the event that one or more of the safe guards do not operate or fail contact your
supplier immediately. DO NOT OPERATE THE MACHINE.
Tampering with or modifying the machine will void warranty.
Emergency Stop Button.
The machine is equipped with a red emergency stop button located on the top right on the
front panel and allows the operator to stop the machine in case of emergency (Fig 1.6)
Fig 1.6
Note:
If the emergency stop button is depressed do not try to pull it out this may result in
damage to the button, to reset the button turn it clockwise and it will reset out on its own.
Emergency
Stop button

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 10
Limit switched front and rear access panels.
The front and rear panels of this machine have been fitted with a limit switch which will stop
the machines operation when the panel is opened (Fig 1.7)
Fig1.7 Rear panel ajar.
Note:
When opening front or rear panel for cleaning or maintenance the machine should be
switched off and unplugged from the wall.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 11
2. Transport and Installation:
2.1 Transport
The instructions given in this section must be carefully followed when transporting the
machine. This operation may include but is not limited to the following:
•Storage of the machine
•Installation of the machine
•The machine comes supplied in a secure packing crate which needs to be handled with
care to protect the machine.
•When being transported the machine crate should be secure to the transporting veichcle
using approved tie down straps to avoid the machine tipping over.
•The machine should not be placed on top of other items during transport.
•When lifting the machine ensure all persons are at a safe distance.
•The forklift operator is to hold the appropriate qualifications.
•Do not climb on or place body under machine crate when it is being lifted from the
ground or transport veichcle.
•When lifting the machine crate ensure forks are spread to the maximum width of the
crate and the crate is against the cradle of the forklift (Fig2.1).
Fig 2.1

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 12
2.2 Installation
•Ensure transport crate and all protective packaging is removed.
•Carefully clean the machine using a damp clean cloth, removing dust on all surfaces.
•When the machine has been unpacked, check the condition of the machine. Any visible
damage indicates that the machine has been dropped or hit by something during
transport. This could lead to malfunctioning. If damage has occurred during transport it
should be attributed to the carrier and International Bakery Equipment Pty Ltd or its
agent should be informed immediately of the situation.
•Locate the divider in a level convenient position where the operation of the machine is
safe and accessible.
•When machine has been placed in its location ensure the front castors are locked to stop
any movement of the machine during operation. (Fig 1.2, page 8)
•Before making the electrical connections check the specifications found in section 1.6 of
this manual and ensure they match those of your electrical service.
•Make certain the electrical supply is correct and the correct breaker is in place to ensure
protection from a short circuit.
•Ensure the three-phase connection of the dough divider is correct. When the operation
handle is lifted the pressure plate will raise.
•A qualified person should correct electrical connection if required.
•Train all operators in the safe operation of this machine.
2.3 Testing the safeguards
Before starting the machine, the safety devices should be checked according to the
following procedure:
•Correct operation of the emergency stop button (Fig 1.6, page.9);
While the machine is operating, press the emergency stop button, the machine should stop
immediately.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 13
3. Machine Operation:
3.1 Intended Operation
This machine has been designed and manufactured for the safe dividing of dough’s with the use
of a hydraulic pump to drive the pressure plate and the dividing blades to ensure an even
pressure and accurate dividing of the dough into 20 pieces of equal weight.
The raising and lowering of the pressure plate and blades is via the operating handle located on
the left hand side front panel of the machine. (Fig 1.2, page 8)
This machine has been designed and built to operate indoors.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 14
3.2 Control Components
Fig 3.1 BPD-20 Control Components
Location
Description
Operation Performed
a
Locking Handle
Locks the top cover into position when lowered.
b
Emergency Stop
Button
When pressed it stops the machine completely.
c
On / Off
Switch
When the green switch is pressed the power is turned on.
When the red switch is pressed the power is turned off.
d
Power indicator
When lit the machine is switched on.
e
Operating Handle
When moved in the direction of the , the pressure plate
will raise.
When moved in the direction of the , the pressure plate
will lower.
a.
b.
c.
d.
e.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 15
3.3 Dividing Operation
•Turn the power on using the green power switch (c).
•Open the top cover by releasing the locking handle (a).
•Lower the pressure plate using the operating handle (e” “ ).
•Place weighed dough into dividing chamber, and press down firmly with hands to
evenly spread dough.
•Lower the top cover and lock into place with locking handle (a).
•Raise the pressure plate with the operating handle (e” “) when the dividing blades have
reached the top cover the machine will make a slightly different sound indicating the
dough has been divided.
•Lower the pressure plate down slightly with (e ” “) to remove pressure from the top
cover.
•Release the top cover with handle (a) and open.
•Using the operating handle (e ” “) raise the pressure plate and divided dough to the top
of the machine and remove dough pieces.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 16
4. Cleaning &Maintanance:
4.1 Cleaning
•Always turn power off at the wall and unplug machine prior to any cleaning or
maintenance procedures to be carried out.
•Keeping the machine cleaned helps to maintain the efficient hassle free operation of the
machine.
•This machine should be cleaned at the end of every day, to prevent a build up of dough
crumb and flour dust.
•Remove excess flour dust with a soft brush.
•Using a plastic scraper remove any dough remnants from dividing chamber.
•Wipe over the entire machine with a damp cloth with a neutral detergent, (Harsh
chemicals will damage the machine).
•To assist cleaning of the dividing blades 4 round blocks have been supplied with this
machine and should be placed in the dividing chamber equal distance apart and against
the wall of the chamber. See fig 4.1
•Using the method described in 3.3 Dividing operation, to raise the blades which can then
be cleaned using a plastic scraper and a damp cloth.
•Blades can then be lowered using the operating handle (e ” “)
Fig 4.1

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 17
•Once a week the front and rear access panels should be opened. See Fig 4.2, 4.3
•Use a dry brush only to clean the inside of the machine.
•Any larger particles of crumb will be caught in the sieve located in the bottom of the
machine this can then simply be removed and crumb disposed of.
Fig 4.2 Front panel open Fig 4.3 Rear panel ajar
Note:
Do not use water jets or hoses to clean this machine as excess water can damage the
machine, and the safe operation of the electrical components.
Note:
ONLY paraffin or white oil can be used to lubricate the dividing blades.
The blades only need a very fine film of oil coating them and this can be done at the end of
the cleaning process at the end of production daily.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 18
4.2 Maintenance
It is recommended that this machine should be serviced once every 12 months by a qualified
technician to maintain hassle free operation.
If in the event the machine does not operate correctly it is recommended that you contact
your supplier to ensure a qualified technician services the machine for you.
It is not advisable to attempt any repairs without prior knowledge of the mechanical or
electrical systems used in the manufacture of this machine, use only qualified technicians.
Note:
Any attempt to modify this machine in any way will result in the warranty being
voided.
Tampering with the mechanical or electrical systems in this machine will void
warranty.

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 19
4.3 Spare Parts List
No.
Description
No.
Description
A
Hinge
165
Lower Holding Plate
B
Hydraulic Control Valve
178
Safety Cover
C
Compression Spring
180
Top Press Cover
D
Dry Ball Bearing
185
Spring Washer
F
Sensor
188
Turning shaft of Upper Press Cover
G
Start Switch
190
Chain Fastening Screw
H
Push Button Switch
192
Fastening Shaft Bushing
I
Emergency Stop Switch
195
Chain Shaft Bushing
J
Handle
196
Screw
K
Horizontal Motor
198
Chain Fastening Screw
L
Main Power Switch
250
Fastening Block
M
Power Indicator
261
Handle Control Valve
100
Lower Machine Body
262
Handle Fastener
110
Hoisting Plate
263
Control Valve Switch
140
Stopper Fastening Plate
265
Switch Control Valve Stopper
146
1/20 Round Stopper 2
300
Oil Tank
147
1/20 Round Stopper
305
Oil Tank Cover
150
Dividing Blade Assembly
325
Front Machine Cover
155
Upper Holding Plate
330
Rear Machine Cover
156
Adjusting Screw
( Middle Holding Plate + Dividing Blade)
335
Oil Tank Stopper
160
Middle Holding Plate
346
Handle of Hydraulic Control Valve
162
Adjusting Screw
(Upper and Lower Holding Plate)
350
Dual Motion Hydraulic Cylinder
164
Fastening Base of Hydraulic Valve

Instruction Manual for Hydraulic Dough Divider BPD-20
www.allaboutbakery.com.au 20
4.4 Exploded Parts Drawing