IC Sciences LS-810-B User manual

Quick Start Guide
Blood Pressure Monitor LS810-B
Wrist Type
Version:1.0
MEM
SET
FCC ID: OU9LS810-B01
Distributed by:
Informed Clinical Sciences Corporation
1 Joy Street, Boston, USA MA 02108
4.0
PRO

1
Quick Start Guide: IC Sciences Blood
Pressure Cuff (Wrist)
Thank you for your purchase of the IC Sciences Blood Pressure Wrist Cuff. As an owner of the wrist
cuff, you automatically receive access to IC Sciences’ My BP Coach PRO (available for iOS and
Android). Please follow the instructions below to get started.
To set up your cuff and pair with your iOS or Android device:
Make sure your cuff battery is charged. Connect one end of the included USB cord into a USB
receptacle on your computer or your iPhone or Android phone charging cube and the other
end into the device. Press and hold the ‘SET’ button until the battery-charging indicator
appears on the cuff screen to indicate charging progress.
Visit iTunes App store or Google play and download the IC Sciences’ My BP Coach App. Once
downloaded, and you have paired your devices via BlueTooth, you will receive an automatic
upgrade to My BP Coach PRO.
To turn on the wrist cuff for the first time: Press and hold START/STOP button for several
seconds to disable shipping mode and engage device.
Before use, you will need to set up your device. Press and hold the SET button for 3 seconds to
initialize date and time set up. Use MEM button to change numerals on flashing items
followed by SET button to move to the next numeral.
To pair devices, turn on BlueTooth on your iOS or Android device and then open My BP Coach
App. Both must be on for pair up. With the wrist monitor OFF, press and hold “START” button
to start pair up. If pair up is successful, you will see a bracket symbol on the monitor. If pair up
fails, you will see a BlueTooth symbol and “ERROR” on the monitor.
To ensure data transmission to My BP Coach PRO, have the app open when taking your
blood pressure.
With palm up, place cuff over wrist with top of cuff about one inch from the bottom of
your wrist.
Fasten the Velcro strip around your wrist leaving extra room (enough to insert a finger)
between your wrist and the cuff.
Rest about 5 minutes before taking your blood pressure.
With your elbow supported on the table, raise your wrist about level with your heart.
Press Start.
To take your blood pressure:
For more instructions, please refer to the complete owner’s manual at http://shop.icscienc-
es.com/products/blood-pressure-monitor-wrist.
If you have questions or feedback, please contact an IC Sciences’ representative at
[email protected]
Did you Know?
You have a personal dashboard at www.icsciences.com. Visit the site and click on “Dashboard” to
log in to access your information.
1.
2.
3.
4.
5.
1.
2.
3.
4.
6.
5.