ICE TV SKIPPA User manual
- Connect the HDMI cable from your SKIPPA to your TV.
- Connect the antenna cable.
- Connect the power cable and turn on SKIPPA. Turn on your
TV and select input source.
- Connect to your network via either an ethernet cable or the
built-in WIFI. If using an ethernet cable,skip Step 2.
- Skippa requires an IceTV account. If you don’t already have
an account, you can create one by selecting NEW USER,
and creating a password. If you have an account, or are
using the free IceTV app, choose EXISTING USER.
- Enter your EMAIL ADDRESS in the eld provided.
- Enter your PASSWORD in the eld provided.
- Press CONTINUE to proceed.
- For NEW USERS, select your REGION e.g. NSW - Sydney.
- Give your SKIPPA a name (e.g. Lounge) or simply leave the
default name, and press CONTINUE.
Press to congure your WIFI network:
- Set network mode to WIFI.
- Make sure AUTOMATIC CONFIGURATION is selected.
- Highlight CHOOSE NETWORK and press to select your
WIFI network.
- Highlight PASSWORD and press to open the on-screen
keyboard. Enter your WIFI password.You can switch to
SYMBOLS by pressing . Once nished press to SAVE
your password.
- Press to connect to your WIFI network.
Setting up your new SKIPPA
TM
is a simple 3 step process:
Step 1.
Connect your
SKIPPA™
Step 3.
Log into
IceTV on your
SKIPPA™
Step 2.
Connect to
your WIFI
Quick Setup Guide
A status message will conrm the internet is available. Press Exit.
Congratulations! Press to nish the SKIPPA Setup.
skippa.tv/manual
SKIPPA’s AutoSkip function is automatically
enabled and detects TV adverts in your
recorded shows.
The detection may take up to one-and-a-
half times the duration of a recording, e.g.
45 mins for a 30 minute recording. Press
MY REC to view your list of recordings.
Each processed recording is marked with
a Blue Sparkle . All marked recordings
can then be enjoyed without TV adverts.
Pressing INFORMATION when watching
a processed recording displays all detected
adverts in a timeline.
SKIPPA offers two modes for you to skip
adverts: skip them automatically (AutoSkip
Mode) or manually (Manual Mode). Your
remote control has 2 buttons to control the
function of these modes:
AUTOSKIP button
Switch between AutoSkip Mode and Manual
Mode by pressing the AutoSkip button for 3
seconds.
Press the AutoSkip button to jump to the
end of the next ad-break, in either Manual or
AutoSkip mode.
UNSKIP button
In rare cases, AutoSkip may skip short
program material or play short adverts. If you
feel that a program section has been skipped
in error, press the UNSKIP button to return to
the start of the last skipped section.
SKIPPA offers three ways to enjoy your
electronic program guide and use Smart
Recording features (“IceTV”):
The IceTV smartphone app and website offer
the full IceTV functionality. We have included
a leaet in SKIPPA’s packaging to learn more
about these features.
Alternatively, the SKIPPA remote control
offers light IceTV functionality:
When viewing the TV guide on the SKIPPA,
highlight a show and simply press RECORD
for a single recording. Press SERIES TAG
to record the entire series of the selected
show.
MY SERIES displays all the series titles
that you have set to record. The episodes from
these series that will be broadcast in the next
5 days are shown in MY WEEK.
MY WEEK is your personal TV guide for
the next 5 days. It displays all the episodes
over the next 5 days that match your series in
MY SERIES, as well as your single recordings
e.g. movies.
Quick User Guide
Download the full SKIPPA
manual from:
MANUAL SKIP buttons
In other rare cases, AutoSkip may miss the
end of a TV advert. You can progress to the
end of the ad by using the manual skip buttons.
